Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea

Detalhes bibliográficos
Autor(a) principal: Junges, Alexander
Data de Publicação: 2011
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Manancial - Repositório Digital da UFSM
dARK ID: ark:/26339/001300000w2fp
Texto Completo: http://repositorio.ufsm.br/handle/1/7951
Resumo: Palladium nanoparticles dispersed on supports have been widely studied over the past years due to their properties for particular applications in sensors and catalysts. In the catalysis field these supported nanoparticles are widely used in various industrial processes of economic importance, with paritcula interest in processes of hydrogenation and dehydrogenation, allowing an increase in the value of compounds from oil-chemical industry. The objective was the experimental study of the synthesis conditions of metallic nanoparticles of palladium supported on silica. Catalysts were synthesized by traditional methods of impregnation, as well as methods using reducing agents and stabilizers for metal nanoparticles. In the synthesis, different conditions were used in the catalysts prepare, by varying the concentrations of metal precursor (palladium nitrate), reducing agent (gallic acid) and stabilizer (polyvinylpyrrolidone), enabling a better understanding of how these conditions affect the dispersion of the metal catalyst, since the size and nature of the interaction of a particle with a metal oxide support are critical in determining the catalytic activity and selectivity. It were obtained nanoparticles with sizes ranging from 3.28 to 16.92 nm, synthesized by different methods, the dispersion of the catalyst where it was used reducing agent and stabilizing agent were, in most cases, similar to those obtained by the traditional method of impregnation, probably due to the high temperatures used in calcination to remove the reducing and stabilizing agent. Finally, the result that became apparent is that the gallic acid itself acts as a reducing agent and protective agent of the nanoparticles, what can facilitate the steps of calcination, since it is not necessary the presence of a protective agent such as PVP polymer, whose thermal degradation is more difficult. On the other hand, in the synthesis of catalysts, the presence of PVP apparently has a little contribution in the dispersion of palladium nanoparticles. More efforts must be devoted to the controlled synthesis of nanoparticles of the metal palladium to be more versatile to promote or catalyze reactions or active components in the manufacture of nanoscale devices.
id UFSM_c4c06cd35e758f1fd4284a6be2f7fab5
oai_identifier_str oai:repositorio.ufsm.br:1/7951
network_acronym_str UFSM
network_name_str Manancial - Repositório Digital da UFSM
repository_id_str
spelling Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogêneaStudy of synthesis of palladium metal nanoparticles for use in heterogeneous catalysisNanopartículasPaládioSínteseNanoparticlesPalladiumSynthesisCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOPalladium nanoparticles dispersed on supports have been widely studied over the past years due to their properties for particular applications in sensors and catalysts. In the catalysis field these supported nanoparticles are widely used in various industrial processes of economic importance, with paritcula interest in processes of hydrogenation and dehydrogenation, allowing an increase in the value of compounds from oil-chemical industry. The objective was the experimental study of the synthesis conditions of metallic nanoparticles of palladium supported on silica. Catalysts were synthesized by traditional methods of impregnation, as well as methods using reducing agents and stabilizers for metal nanoparticles. In the synthesis, different conditions were used in the catalysts prepare, by varying the concentrations of metal precursor (palladium nitrate), reducing agent (gallic acid) and stabilizer (polyvinylpyrrolidone), enabling a better understanding of how these conditions affect the dispersion of the metal catalyst, since the size and nature of the interaction of a particle with a metal oxide support are critical in determining the catalytic activity and selectivity. It were obtained nanoparticles with sizes ranging from 3.28 to 16.92 nm, synthesized by different methods, the dispersion of the catalyst where it was used reducing agent and stabilizing agent were, in most cases, similar to those obtained by the traditional method of impregnation, probably due to the high temperatures used in calcination to remove the reducing and stabilizing agent. Finally, the result that became apparent is that the gallic acid itself acts as a reducing agent and protective agent of the nanoparticles, what can facilitate the steps of calcination, since it is not necessary the presence of a protective agent such as PVP polymer, whose thermal degradation is more difficult. On the other hand, in the synthesis of catalysts, the presence of PVP apparently has a little contribution in the dispersion of palladium nanoparticles. More efforts must be devoted to the controlled synthesis of nanoparticles of the metal palladium to be more versatile to promote or catalyze reactions or active components in the manufacture of nanoscale devices.Programa de Apoio aos Planos de Reestruturação e Expansão das Universidades FederaisNanopartículas de paládio dispersas em suportes têm sido amplamente estudadas ao longo dos últimos anos, devido às suas propriedades que permitem aplicações principalmente em sensores e catalisadores. Na área da catálise estas nanopartículas suportadas são extensamente empregadas em vários processos industriais de importância econômica, onde se destaca os processos de hidrogenação e desidrogenação permitindo agregar valor aos compostos provenientes da indústria óleo-química. Assim, o objetivo deste trabalho foi estudar experimentalmente as condições de síntese de nanopartículas metálicas de paládio suportadas em sílica. Foram sintetizados catalisadores através de métodos tradicionais de impregnação, bem como métodos que utilizam agentes redutores e estabilizantes de nanopartículas metálicas. Nas sínteses, foram utilizadas diferentes condições de preparo, variando-se as concentrações de precursor metálico (nitrato de paládio), do agente redutor (ácido gálico) e do agente estabilizante (polivinilpirrolidona). Com isto, foi possível obter uma melhor compreensão da influencia destas variáveis sobre a dispersão metálica do catalisador, uma que o tamanho e a natureza da interação de uma partícula metálica com um suporte óxido são fundamentais para determinar a atividade e seletividade catalítica. Foram obtidas nanopartículas com tamanhos entre 3,28 a 16,92 nm, sintetizadas pelos diferentes métodos, as dispersões dos catalisadores onde foi utilizado agente redutor e agente estabilizante foram, na grande maioria, similares às obtidas pelo método tradicional de impregnação, provavelmente devido às altas temperaturas empregas na calcinação para remover os agentes redutores e estabilizantes. Por fim, ficou aparente o resultado de que o ácido gálico por si só age como agente redutor e agente protetor das nanopartículas, o que pode facilitar as etapas de calcinação, já que não é necessária a presença de um agente protetor polimérico como o PVP, cuja degradação térmica é mais difícil. Por outro lado, na síntese dos catalisadores, a presença do PVP aparentemente pouco contribuiu para uma melhor dispersão das nanopartículas de paládio.Universidade Federal de Santa MariaBREngenharia de ProcessosUFSMPrograma de Pós-Graduação em Engenharia de ProcessosSchwaab, Marciohttp://lattes.cnpq.br/7572439258027513Coutinho, Elisa Barbosahttp://lattes.cnpq.br/0551304679934048Alberton, André Luíshttp://lattes.cnpq.br/8926865010313541Junges, Alexander2012-06-042012-06-042011-09-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfJUNGES, Alexander. Study of synthesis of palladium metal nanoparticles for use in heterogeneous catalysis. 2011. 86 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2011.http://repositorio.ufsm.br/handle/1/7951ark:/26339/001300000w2fpporinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-01-26T17:15:49Zoai:repositorio.ufsm.br:1/7951Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-01-26T17:15:49Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
Study of synthesis of palladium metal nanoparticles for use in heterogeneous catalysis
title Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
spellingShingle Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
Junges, Alexander
Nanopartículas
Paládio
Síntese
Nanoparticles
Palladium
Synthesis
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
title_short Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
title_full Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
title_fullStr Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
title_full_unstemmed Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
title_sort Estudo da síntese de nanopartículas metálicas de paládio para uso em catálise heterogênea
author Junges, Alexander
author_facet Junges, Alexander
author_role author
dc.contributor.none.fl_str_mv Schwaab, Marcio
http://lattes.cnpq.br/7572439258027513
Coutinho, Elisa Barbosa
http://lattes.cnpq.br/0551304679934048
Alberton, André Luís
http://lattes.cnpq.br/8926865010313541
dc.contributor.author.fl_str_mv Junges, Alexander
dc.subject.por.fl_str_mv Nanopartículas
Paládio
Síntese
Nanoparticles
Palladium
Synthesis
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
topic Nanopartículas
Paládio
Síntese
Nanoparticles
Palladium
Synthesis
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
description Palladium nanoparticles dispersed on supports have been widely studied over the past years due to their properties for particular applications in sensors and catalysts. In the catalysis field these supported nanoparticles are widely used in various industrial processes of economic importance, with paritcula interest in processes of hydrogenation and dehydrogenation, allowing an increase in the value of compounds from oil-chemical industry. The objective was the experimental study of the synthesis conditions of metallic nanoparticles of palladium supported on silica. Catalysts were synthesized by traditional methods of impregnation, as well as methods using reducing agents and stabilizers for metal nanoparticles. In the synthesis, different conditions were used in the catalysts prepare, by varying the concentrations of metal precursor (palladium nitrate), reducing agent (gallic acid) and stabilizer (polyvinylpyrrolidone), enabling a better understanding of how these conditions affect the dispersion of the metal catalyst, since the size and nature of the interaction of a particle with a metal oxide support are critical in determining the catalytic activity and selectivity. It were obtained nanoparticles with sizes ranging from 3.28 to 16.92 nm, synthesized by different methods, the dispersion of the catalyst where it was used reducing agent and stabilizing agent were, in most cases, similar to those obtained by the traditional method of impregnation, probably due to the high temperatures used in calcination to remove the reducing and stabilizing agent. Finally, the result that became apparent is that the gallic acid itself acts as a reducing agent and protective agent of the nanoparticles, what can facilitate the steps of calcination, since it is not necessary the presence of a protective agent such as PVP polymer, whose thermal degradation is more difficult. On the other hand, in the synthesis of catalysts, the presence of PVP apparently has a little contribution in the dispersion of palladium nanoparticles. More efforts must be devoted to the controlled synthesis of nanoparticles of the metal palladium to be more versatile to promote or catalyze reactions or active components in the manufacture of nanoscale devices.
publishDate 2011
dc.date.none.fl_str_mv 2011-09-30
2012-06-04
2012-06-04
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv JUNGES, Alexander. Study of synthesis of palladium metal nanoparticles for use in heterogeneous catalysis. 2011. 86 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2011.
http://repositorio.ufsm.br/handle/1/7951
dc.identifier.dark.fl_str_mv ark:/26339/001300000w2fp
identifier_str_mv JUNGES, Alexander. Study of synthesis of palladium metal nanoparticles for use in heterogeneous catalysis. 2011. 86 f. Dissertação (Mestrado em Engenharia) - Universidade Federal de Santa Maria, Santa Maria, 2011.
ark:/26339/001300000w2fp
url http://repositorio.ufsm.br/handle/1/7951
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
BR
Engenharia de Processos
UFSM
Programa de Pós-Graduação em Engenharia de Processos
publisher.none.fl_str_mv Universidade Federal de Santa Maria
BR
Engenharia de Processos
UFSM
Programa de Pós-Graduação em Engenharia de Processos
dc.source.none.fl_str_mv reponame:Manancial - Repositório Digital da UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Manancial - Repositório Digital da UFSM
collection Manancial - Repositório Digital da UFSM
repository.name.fl_str_mv Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com
_version_ 1822612512952025088