Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/14356 https://doi.org/10.14393/ufu.te.2015.69 |
Resumo: | This work presents the analysis and experimental development of a topological structure of hybrid rectifier able to maintain a regulated output DC link for the occurrence of balanced and unbalanced voltage sags in the AC mains supply. Moreover, under normal conditions of the supply voltage, the structure operates draining currents with low harmonic content and high power factor. It is noteworthy that these operational characteristics are achieved with the switched converters that comprises the structure processing only a portion of total power output, making the most efficient and robust set. The new topology is denominated Three Phase Hybrid Rectifier with Series Compensation DC Bus and has as main characteristic an innovative voltage regulation technique based on insertion of a DC-DC converter with output capacitor connected in series with the capacitor available in the DC bus of the main converter. This additional converter is responsible for regulating the DC link voltage according to a specific reference value, operating only in the voltage sag condition and processing only a portion of the total output power drained by the load in this operating condition. To analyze the behavior of the proposed topology has been implemented in a computer model PSIM® platform, it was possible to verify the efficiency of the control strategy for sinusoidal current imposition based on the real-time calculation of DHTI during normal conditions of supply voltage. In addition, It was evaluated the behavior of the structure regulating the DC link voltage on the occurrence of voltage sags. In order to corroborate the exposed theory a 5 kW prototype was constructed and evaluated in the laboratory. This was tested in the regular voltage supply condition and during the occurrence of sag conditions types A, B, C, D, E, F and G. It was observed that in normal conditions the proposed solution is effective in mitigating harmonic content of the AC input current. During the occurrence of voltage sags the output DC link was set at the preset value in the control strategy. In both cases the switched converters processed only a fraction of the total power output, which makes the structure very attractive for applications with high power levels. |
id |
UFU_940bba60b605976d9a0dbc02625625f5 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/14356 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CCRetificadores híbridosAfundamento de tensãoDistorção harmônicaDSPFator de potênciaRetificadores de corrente elétricaDistorção elétricaHybrid rectifiersVoltage sagHarmonic distortionPower factorCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAThis work presents the analysis and experimental development of a topological structure of hybrid rectifier able to maintain a regulated output DC link for the occurrence of balanced and unbalanced voltage sags in the AC mains supply. Moreover, under normal conditions of the supply voltage, the structure operates draining currents with low harmonic content and high power factor. It is noteworthy that these operational characteristics are achieved with the switched converters that comprises the structure processing only a portion of total power output, making the most efficient and robust set. The new topology is denominated Three Phase Hybrid Rectifier with Series Compensation DC Bus and has as main characteristic an innovative voltage regulation technique based on insertion of a DC-DC converter with output capacitor connected in series with the capacitor available in the DC bus of the main converter. This additional converter is responsible for regulating the DC link voltage according to a specific reference value, operating only in the voltage sag condition and processing only a portion of the total output power drained by the load in this operating condition. To analyze the behavior of the proposed topology has been implemented in a computer model PSIM® platform, it was possible to verify the efficiency of the control strategy for sinusoidal current imposition based on the real-time calculation of DHTI during normal conditions of supply voltage. In addition, It was evaluated the behavior of the structure regulating the DC link voltage on the occurrence of voltage sags. In order to corroborate the exposed theory a 5 kW prototype was constructed and evaluated in the laboratory. This was tested in the regular voltage supply condition and during the occurrence of sag conditions types A, B, C, D, E, F and G. It was observed that in normal conditions the proposed solution is effective in mitigating harmonic content of the AC input current. During the occurrence of voltage sags the output DC link was set at the preset value in the control strategy. In both cases the switched converters processed only a fraction of the total power output, which makes the structure very attractive for applications with high power levels.Doutor em CiênciasEste trabalho apresenta a análise e desenvolvimento experimental de uma estrutura topológica de retificador híbrido capaz de regular o barramento CC de saída frente a ocorrência de afundamentos de tensão equilibrados e desequilibrados na rede CA de alimentação. Além disso, em condições normais da tensão de alimentação, a estrutura opera drenando da rede correntes com reduzido conteúdo harmônico e elevado fator de potência. Destaca-se que estas características operacionais são alcançadas com os conversores chaveados que compõe a estrutura processando apenas uma parcela da potência total de saída, tornando o conjunto mais eficiente e robusto. A nova topologia é denominada Retificador Híbrido Trifásico com Compensação Série no Barramento CC e possui como principal característica uma inovadora técnica de regulação de tensão baseada na inserção de um conversor CC-CC cujo capacitor de saída é conectado em série com o capacitor do barramento CC disponibilizado pelo conversor principal. Este conversor adicional é responsável por regular a tensão do barramento CC de acordo com um valor específico de referência, operando somente na condição de afundamento de tensão e processando apenas uma parcela da potência total de saída drenada pela carga nesta condição de operação. Para analisar o comportamento da topologia proposta foi implementado um modelo computacional na plataforma PSIM®, em que foi possível verificar a eficiência da estratégia de controle para imposição de corrente senoidal baseado no cálculo em tempo real da DHTI durante as condições normais da tensão de alimentação. Além disso, avaliou-se o comportamento da estrutura regulando a tensão do barramento CC diante da ocorrência de afundamentos de tensão na alimentação. Com o intuito de corroborar com a teoria exposta um protótipo de 5 kW foi construído e avaliado em laboratório. Este foi ensaiado operando em condições normais da tensão de alimentação e diante da ocorrência de afundamento dos tipos A, B, C, D, E, F e G. Foi verificado que em condições normais a solução proposta é eficaz ao mitigar do conteúdo harmônico da corrente CA de entrada. Durante a ocorrência de afundamentos de tensão o barramento CC de saída foi regulado no valor pré-estabelecido na estratégia de controle. Em ambas situações os conversores chaveados processaram apenas uma parcela da potência total de saída, o que torna a estrutura bastante atrativa para aplicações com elevados níveis de potência.Universidade Federal de UberlândiaBRPrograma de Pós-graduação em Engenharia ElétricaEngenhariasUFUFreitas, Luiz Carlos dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4728494D5Freitas, Luiz Carlos Gomes dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770424D9Coelho, Ernane Antônio Alveshttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4784116T0&dataRevisao=nullVieira Junior, Joao Batistahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787838A6Seixas, Falcondes José Mendes dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708819D0Font, Carlos Henrique Illahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4769974P9Lima, Gustavo Brito de2016-06-22T18:38:15Z2016-03-302016-06-22T18:38:15Z2015-05-19info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfapplication/pdfLIMA, Gustavo Brito de. Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC. 2015. 206 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2015. DOI https://doi.org/10.14393/ufu.te.2015.69.https://repositorio.ufu.br/handle/123456789/14356https://doi.org/10.14393/ufu.te.2015.69porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-03-04T16:13:20Zoai:repositorio.ufu.br:123456789/14356Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-03-04T16:13:20Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
title |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
spellingShingle |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC Lima, Gustavo Brito de Retificadores híbridos Afundamento de tensão Distorção harmônica DSP Fator de potência Retificadores de corrente elétrica Distorção elétrica Hybrid rectifiers Voltage sag Harmonic distortion Power factor CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
title_full |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
title_fullStr |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
title_full_unstemmed |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
title_sort |
Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC |
author |
Lima, Gustavo Brito de |
author_facet |
Lima, Gustavo Brito de |
author_role |
author |
dc.contributor.none.fl_str_mv |
Freitas, Luiz Carlos de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4728494D5 Freitas, Luiz Carlos Gomes de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770424D9 Coelho, Ernane Antônio Alves http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4784116T0&dataRevisao=null Vieira Junior, Joao Batista http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787838A6 Seixas, Falcondes José Mendes de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4708819D0 Font, Carlos Henrique Illa http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4769974P9 |
dc.contributor.author.fl_str_mv |
Lima, Gustavo Brito de |
dc.subject.por.fl_str_mv |
Retificadores híbridos Afundamento de tensão Distorção harmônica DSP Fator de potência Retificadores de corrente elétrica Distorção elétrica Hybrid rectifiers Voltage sag Harmonic distortion Power factor CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
topic |
Retificadores híbridos Afundamento de tensão Distorção harmônica DSP Fator de potência Retificadores de corrente elétrica Distorção elétrica Hybrid rectifiers Voltage sag Harmonic distortion Power factor CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
This work presents the analysis and experimental development of a topological structure of hybrid rectifier able to maintain a regulated output DC link for the occurrence of balanced and unbalanced voltage sags in the AC mains supply. Moreover, under normal conditions of the supply voltage, the structure operates draining currents with low harmonic content and high power factor. It is noteworthy that these operational characteristics are achieved with the switched converters that comprises the structure processing only a portion of total power output, making the most efficient and robust set. The new topology is denominated Three Phase Hybrid Rectifier with Series Compensation DC Bus and has as main characteristic an innovative voltage regulation technique based on insertion of a DC-DC converter with output capacitor connected in series with the capacitor available in the DC bus of the main converter. This additional converter is responsible for regulating the DC link voltage according to a specific reference value, operating only in the voltage sag condition and processing only a portion of the total output power drained by the load in this operating condition. To analyze the behavior of the proposed topology has been implemented in a computer model PSIM® platform, it was possible to verify the efficiency of the control strategy for sinusoidal current imposition based on the real-time calculation of DHTI during normal conditions of supply voltage. In addition, It was evaluated the behavior of the structure regulating the DC link voltage on the occurrence of voltage sags. In order to corroborate the exposed theory a 5 kW prototype was constructed and evaluated in the laboratory. This was tested in the regular voltage supply condition and during the occurrence of sag conditions types A, B, C, D, E, F and G. It was observed that in normal conditions the proposed solution is effective in mitigating harmonic content of the AC input current. During the occurrence of voltage sags the output DC link was set at the preset value in the control strategy. In both cases the switched converters processed only a fraction of the total power output, which makes the structure very attractive for applications with high power levels. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-05-19 2016-06-22T18:38:15Z 2016-03-30 2016-06-22T18:38:15Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
LIMA, Gustavo Brito de. Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC. 2015. 206 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2015. DOI https://doi.org/10.14393/ufu.te.2015.69. https://repositorio.ufu.br/handle/123456789/14356 https://doi.org/10.14393/ufu.te.2015.69 |
identifier_str_mv |
LIMA, Gustavo Brito de. Proposta de retificadores híbridos com suportabilidade a afundamentos de tensão utilizando técnica de compensação série de tensão no barramento CC. 2015. 206 f. Tese (Doutorado em Engenharias) - Universidade Federal de Uberlândia, Uberlândia, 2015. DOI https://doi.org/10.14393/ufu.te.2015.69. |
url |
https://repositorio.ufu.br/handle/123456789/14356 https://doi.org/10.14393/ufu.te.2015.69 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Elétrica Engenharias UFU |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia BR Programa de Pós-graduação em Engenharia Elétrica Engenharias UFU |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569689383862272 |