Métodos de amostragem e de determinação do teor de umidade da madeira em tora
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | LOCUS Repositório Institucional da UFV |
Texto Completo: | http://locus.ufv.br/handle/123456789/3148 |
Resumo: | Even with the rising demand of roundwood utilization by many forestry companies, there are only a few studies of technics that search for the moisture content in a fast and precise way on the field, in addition to studies that could establish the optimum number of roundwood to be used as samples as a way to represent the real moisture content of piled wood in the field or even in the factory courtyard. So, the present paper pursued comparing two content sampling methods (Simple Casual Samping and Stratified Casual Sampling) to determine the optimum number of roundwood samples to obtain the moisture content of the population, evaluate the sample collecting and moisture content determination of roundwood and comparing them to the ABNT-NBR14929 norm.The samples were random collect from a 250 stwoodlot, 144 roundwood in four classes of diameter. Later, the moisture content of those samples were measured and from this values the population estimates by simple casual sampling (ACS) and by stratified casual sampling (ACE) were calculated, determining the optimum number of roundwood (n) to be sampled. For results of the number of roundwood to be sampled by ASC for each acceptable error 5; 10; 15; 20% were respectively 214; 55; 25 and 14 and for ACE (proportional) the number of roundwood to be sampled was 141; 35; 16; 9 and for ACE (Neymam) this number was 136; 34; 15 and 8 roundwood. The alternatives of sample collecting and moisture content determination in roundwood were measured using a moisture content analyzing scale; the samples were collected with a portable drill and a manual auger, collecting the samples in sawdust form. Capacitive and resistive electrical meters were also used. Because of eventual distortions among the results found by this methods in comparison with theABNT-NBR14929 method, a correction factor and a regression model were established to make the adjusts. It was concluded that the more suggested sampling method for this study, considering the acceptable error, was the ACE. And if a correction factor or a regression model is used, the moisture content determination methods of the wood are appropriated for determining the moisture content in roundwood in a fast, efficient and less costly way way than the ABNT-NBR14929 method. |
id |
UFV_a049dd72ba6a5bf769894766c4b26ab7 |
---|---|
oai_identifier_str |
oai:locus.ufv.br:123456789/3148 |
network_acronym_str |
UFV |
network_name_str |
LOCUS Repositório Institucional da UFV |
repository_id_str |
2145 |
spelling |
Donato, Danilo Barroshttp://lattes.cnpq.br/1402103621090328Carneiro, Angélica de Cássia Oliveirahttp://lattes.cnpq.br/9474032258378987Vital, Benedito Rochahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787473J6Carvalho, Ana Márcia Macedo Ladeirahttp://lattes.cnpq.br/6017392658993288Santos, Rosimeire Cavalcante doshttp://lattes.cnpq.br/1633331786162880Castro, Renato Vinícius Oliveirahttp://lattes.cnpq.br/23977680525941192015-03-26T13:15:29Z2014-02-212015-03-26T13:15:29Z2013-07-17DONATO, Danilo Barros. Sampling and determination of moisture content methodsin roundwood. 2013. 71 f. Dissertação (Mestrado em Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de) - Universidade Federal de Viçosa, Viçosa, 2013.http://locus.ufv.br/handle/123456789/3148Even with the rising demand of roundwood utilization by many forestry companies, there are only a few studies of technics that search for the moisture content in a fast and precise way on the field, in addition to studies that could establish the optimum number of roundwood to be used as samples as a way to represent the real moisture content of piled wood in the field or even in the factory courtyard. So, the present paper pursued comparing two content sampling methods (Simple Casual Samping and Stratified Casual Sampling) to determine the optimum number of roundwood samples to obtain the moisture content of the population, evaluate the sample collecting and moisture content determination of roundwood and comparing them to the ABNT-NBR14929 norm.The samples were random collect from a 250 stwoodlot, 144 roundwood in four classes of diameter. Later, the moisture content of those samples were measured and from this values the population estimates by simple casual sampling (ACS) and by stratified casual sampling (ACE) were calculated, determining the optimum number of roundwood (n) to be sampled. For results of the number of roundwood to be sampled by ASC for each acceptable error 5; 10; 15; 20% were respectively 214; 55; 25 and 14 and for ACE (proportional) the number of roundwood to be sampled was 141; 35; 16; 9 and for ACE (Neymam) this number was 136; 34; 15 and 8 roundwood. The alternatives of sample collecting and moisture content determination in roundwood were measured using a moisture content analyzing scale; the samples were collected with a portable drill and a manual auger, collecting the samples in sawdust form. Capacitive and resistive electrical meters were also used. Because of eventual distortions among the results found by this methods in comparison with theABNT-NBR14929 method, a correction factor and a regression model were established to make the adjusts. It was concluded that the more suggested sampling method for this study, considering the acceptable error, was the ACE. And if a correction factor or a regression model is used, the moisture content determination methods of the wood are appropriated for determining the moisture content in roundwood in a fast, efficient and less costly way way than the ABNT-NBR14929 method.Apesar da crescente demanda de utilização da madeira em tora por várias empresas do setor florestal, ainda são poucos os estudos das técnicas que visam à determinação do teor de umidade de forma rápida e precisa em campo, além de estudos que permitem estabelecer o número ótimo de toras a serem amostradas como forma de representar o teor de umidade real da madeira empilhada no campo, ou até mesmo nos pátios das fábricas. O presente trabalho teve como objetivos comparar duas metodologias de amostragem (amostragem casual simples e a amostragem casual estratificada), com o propósito de determinar o número ótimo de amostras de madeira em tora para obter o teor de umidade da população, e avaliar diferentes alternativas de coleta de amostras e métodos para determinar o teor de umidade da madeira em tora, comparando-os com o método estabelecido pela norma da ABNT-NBR14929. Foram amostradas aleatoriamente, de um lote de 250 st de madeira, 144 toras distribuídas em quatro classes de diâmetro. Em seguida, determinou-se o teor de umidade dessas amostras, e a partir desses valores foram calculadas as estimativas populacionais pela amostragem casual simples (ACS) e pela amostragem casual estratificada (ACE), estabelecendo assim o número ótimo de toras (n) a serem amostradas. O número de toras de madeira amostradas pela ACS para cada erro admissível 5, 10, 15 e 20% foi, respectivamente, 214, 55, 25 e 14; para a ACE (proporcional) foi 141, 35, 16 e 9; e para ACE (ótima) foi 136, 34, 15 e 8. As alternativas de coleta de amostras e a determinação do teor de umidade da madeira em tora foram obtidas utilizando uma balança analisadora do teor de umidade, quando na coleta das amostras foram utilizadas uma furadeira elétrica portátil e um trado manual, coletando as amostras em forma de serragem. Também foram utilizados os medidores elétricos do tipo capacitivo e resistivo. Devido a eventuais distorções entre os resultados encontrados por esses métodos, em comparação com o método ABNT-NBR14929, foram estabelecidos um fator de correção e um modelo de regressão para fazer os ajustes. Concluiu-se que o método de amostragem mais indicado para este estudo, considerando o mesmo erro admissível, foi a ACE, e que desde que se utilize um fator de correção ou um modelo de regressão, os métodos de determinação do teor de umidade da madeira aqui testados são adequados para avaliar a umidade da madeira em tora de maneira rápida, eficiente e com menor custo, quando comparados ao método da ABNT-NBR14929.Conselho Nacional de Desenvolvimento Científico e Tecnológicoapplication/pdfporUniversidade Federal de ViçosaMestrado em Ciência FlorestalUFVBRManejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização deErro admissívelPerfil de umidadeDiâmetro e comprimento da toraFatores de correçãoPermissible errorProfile moistureDiameter and length of the roundwoodCorrection factorsCNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAISMétodos de amostragem e de determinação do teor de umidade da madeira em toraSampling and determination of moisture content methodsin roundwoodinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:LOCUS Repositório Institucional da UFVinstname:Universidade Federal de Viçosa (UFV)instacron:UFVORIGINALtexto completo.pdfapplication/pdf1181107https://locus.ufv.br//bitstream/123456789/3148/1/texto%20completo.pdf62e9e5ddb444c523b560e7dcf2cdf999MD51TEXTtexto completo.pdf.txttexto completo.pdf.txtExtracted texttext/plain133610https://locus.ufv.br//bitstream/123456789/3148/2/texto%20completo.pdf.txt7cac6b6a0d5c4e991e9694fd399bc344MD52THUMBNAILtexto completo.pdf.jpgtexto completo.pdf.jpgIM Thumbnailimage/jpeg3539https://locus.ufv.br//bitstream/123456789/3148/3/texto%20completo.pdf.jpg860d3e310683a68c3e74fa186d168039MD53123456789/31482016-04-06 23:02:09.242oai:locus.ufv.br:123456789/3148Repositório InstitucionalPUBhttps://www.locus.ufv.br/oai/requestfabiojreis@ufv.bropendoar:21452016-04-07T02:02:09LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV)false |
dc.title.por.fl_str_mv |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
dc.title.alternative.eng.fl_str_mv |
Sampling and determination of moisture content methodsin roundwood |
title |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
spellingShingle |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora Donato, Danilo Barros Erro admissível Perfil de umidade Diâmetro e comprimento da tora Fatores de correção Permissible error Profile moisture Diameter and length of the roundwood Correction factors CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAIS |
title_short |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
title_full |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
title_fullStr |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
title_full_unstemmed |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
title_sort |
Métodos de amostragem e de determinação do teor de umidade da madeira em tora |
author |
Donato, Danilo Barros |
author_facet |
Donato, Danilo Barros |
author_role |
author |
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/1402103621090328 |
dc.contributor.author.fl_str_mv |
Donato, Danilo Barros |
dc.contributor.advisor-co1.fl_str_mv |
Carneiro, Angélica de Cássia Oliveira |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/9474032258378987 |
dc.contributor.advisor-co2.fl_str_mv |
Vital, Benedito Rocha |
dc.contributor.advisor-co2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787473J6 |
dc.contributor.advisor1.fl_str_mv |
Carvalho, Ana Márcia Macedo Ladeira |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/6017392658993288 |
dc.contributor.referee1.fl_str_mv |
Santos, Rosimeire Cavalcante dos |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/1633331786162880 |
dc.contributor.referee2.fl_str_mv |
Castro, Renato Vinícius Oliveira |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/2397768052594119 |
contributor_str_mv |
Carneiro, Angélica de Cássia Oliveira Vital, Benedito Rocha Carvalho, Ana Márcia Macedo Ladeira Santos, Rosimeire Cavalcante dos Castro, Renato Vinícius Oliveira |
dc.subject.por.fl_str_mv |
Erro admissível Perfil de umidade Diâmetro e comprimento da tora Fatores de correção |
topic |
Erro admissível Perfil de umidade Diâmetro e comprimento da tora Fatores de correção Permissible error Profile moisture Diameter and length of the roundwood Correction factors CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAIS |
dc.subject.eng.fl_str_mv |
Permissible error Profile moisture Diameter and length of the roundwood Correction factors |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL::TECNOLOGIA E UTILIZACAO DE PRODUTOS FLORESTAIS |
description |
Even with the rising demand of roundwood utilization by many forestry companies, there are only a few studies of technics that search for the moisture content in a fast and precise way on the field, in addition to studies that could establish the optimum number of roundwood to be used as samples as a way to represent the real moisture content of piled wood in the field or even in the factory courtyard. So, the present paper pursued comparing two content sampling methods (Simple Casual Samping and Stratified Casual Sampling) to determine the optimum number of roundwood samples to obtain the moisture content of the population, evaluate the sample collecting and moisture content determination of roundwood and comparing them to the ABNT-NBR14929 norm.The samples were random collect from a 250 stwoodlot, 144 roundwood in four classes of diameter. Later, the moisture content of those samples were measured and from this values the population estimates by simple casual sampling (ACS) and by stratified casual sampling (ACE) were calculated, determining the optimum number of roundwood (n) to be sampled. For results of the number of roundwood to be sampled by ASC for each acceptable error 5; 10; 15; 20% were respectively 214; 55; 25 and 14 and for ACE (proportional) the number of roundwood to be sampled was 141; 35; 16; 9 and for ACE (Neymam) this number was 136; 34; 15 and 8 roundwood. The alternatives of sample collecting and moisture content determination in roundwood were measured using a moisture content analyzing scale; the samples were collected with a portable drill and a manual auger, collecting the samples in sawdust form. Capacitive and resistive electrical meters were also used. Because of eventual distortions among the results found by this methods in comparison with theABNT-NBR14929 method, a correction factor and a regression model were established to make the adjusts. It was concluded that the more suggested sampling method for this study, considering the acceptable error, was the ACE. And if a correction factor or a regression model is used, the moisture content determination methods of the wood are appropriated for determining the moisture content in roundwood in a fast, efficient and less costly way way than the ABNT-NBR14929 method. |
publishDate |
2013 |
dc.date.issued.fl_str_mv |
2013-07-17 |
dc.date.available.fl_str_mv |
2014-02-21 2015-03-26T13:15:29Z |
dc.date.accessioned.fl_str_mv |
2015-03-26T13:15:29Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
DONATO, Danilo Barros. Sampling and determination of moisture content methodsin roundwood. 2013. 71 f. Dissertação (Mestrado em Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de) - Universidade Federal de Viçosa, Viçosa, 2013. |
dc.identifier.uri.fl_str_mv |
http://locus.ufv.br/handle/123456789/3148 |
identifier_str_mv |
DONATO, Danilo Barros. Sampling and determination of moisture content methodsin roundwood. 2013. 71 f. Dissertação (Mestrado em Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de) - Universidade Federal de Viçosa, Viçosa, 2013. |
url |
http://locus.ufv.br/handle/123456789/3148 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.publisher.program.fl_str_mv |
Mestrado em Ciência Florestal |
dc.publisher.initials.fl_str_mv |
UFV |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Manejo Florestal; Meio Ambiente e Conservação da Natureza; Silvicultura; Tecnologia e Utilização de |
publisher.none.fl_str_mv |
Universidade Federal de Viçosa |
dc.source.none.fl_str_mv |
reponame:LOCUS Repositório Institucional da UFV instname:Universidade Federal de Viçosa (UFV) instacron:UFV |
instname_str |
Universidade Federal de Viçosa (UFV) |
instacron_str |
UFV |
institution |
UFV |
reponame_str |
LOCUS Repositório Institucional da UFV |
collection |
LOCUS Repositório Institucional da UFV |
bitstream.url.fl_str_mv |
https://locus.ufv.br//bitstream/123456789/3148/1/texto%20completo.pdf https://locus.ufv.br//bitstream/123456789/3148/2/texto%20completo.pdf.txt https://locus.ufv.br//bitstream/123456789/3148/3/texto%20completo.pdf.jpg |
bitstream.checksum.fl_str_mv |
62e9e5ddb444c523b560e7dcf2cdf999 7cac6b6a0d5c4e991e9694fd399bc344 860d3e310683a68c3e74fa186d168039 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
LOCUS Repositório Institucional da UFV - Universidade Federal de Viçosa (UFV) |
repository.mail.fl_str_mv |
fabiojreis@ufv.br |
_version_ |
1801213126343917568 |