Influence of additional polymerization in the microhardness of direct composite resins
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Brazilian Dental Science |
Texto Completo: | https://ojs.ict.unesp.br/index.php/cob/article/view/333 |
Resumo: | Objective: To evaluate different methods of additional polymerization in the Vickers’ microhardness of three composite resins. Material and Methods: With assistance of a metallic matrix (3 x 4mm), 30 specimens (sps) of each direct resin composite (drc) were prepared, entitled: Filtek Z250(3M ESPE, Saint Paul/MN-USA)(Gr1), W3D(Wilcos, Petrópolis/ RJ-Brazil)(Gr2), and EstheticX (Dentsply/York/PA-USA)(Gr3). All sps were photopolimerized, by the incremental technique, during 40 seconds (Gr1 - n=10: control). After that, 20 samples of each group were divided and half of the samples (n=10) were submitted to the additional polymerization during 15 minutes to 127ºC in autoclave (Gr2) and the other half in stove (Gr3). After all sps were stored in distilled water (37ºC/24 hours). The microhardness was accomplished in digital machine (Future-Tech, FM 700 Model), with 50kg of load. The data obtained (Kg/mm2) were analyzed utilizing the ANOVA Test (2 factors) and Tukey test (p<0.05). Results: The values of mean ± standar deviations obtained were: Gr1a(84,2±5,1), Gr1b (71,6±6,7), Gr1c (89,6±7,4), Gr2a (101,1±6,0), Gr2b (96,4±9,0), Gr2c (112,6±7,3), Gr3a (74,0±6,5), Gr3b (66,0±12,7) e Gr3c (81,7±6,5). The polymerization in stove produced a higher microhardness than the other kinds of polymerization (p<0.05) and the microhardness of the resins statistically differed among them (p<0.05). Conclusion: The additional polymerization of the Filtek Z250 in the stove produced microhardness statistically higher than the others. |
id |
UNESP-20_be5d673246110d4b6f7deaaabca4bc22 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/333 |
network_acronym_str |
UNESP-20 |
network_name_str |
Brazilian Dental Science |
repository_id_str |
|
spelling |
Influence of additional polymerization in the microhardness of direct composite resinsObjective: To evaluate different methods of additional polymerization in the Vickers’ microhardness of three composite resins. Material and Methods: With assistance of a metallic matrix (3 x 4mm), 30 specimens (sps) of each direct resin composite (drc) were prepared, entitled: Filtek Z250(3M ESPE, Saint Paul/MN-USA)(Gr1), W3D(Wilcos, Petrópolis/ RJ-Brazil)(Gr2), and EstheticX (Dentsply/York/PA-USA)(Gr3). All sps were photopolimerized, by the incremental technique, during 40 seconds (Gr1 - n=10: control). After that, 20 samples of each group were divided and half of the samples (n=10) were submitted to the additional polymerization during 15 minutes to 127ºC in autoclave (Gr2) and the other half in stove (Gr3). After all sps were stored in distilled water (37ºC/24 hours). The microhardness was accomplished in digital machine (Future-Tech, FM 700 Model), with 50kg of load. The data obtained (Kg/mm2) were analyzed utilizing the ANOVA Test (2 factors) and Tukey test (p<0.05). Results: The values of mean ± standar deviations obtained were: Gr1a(84,2±5,1), Gr1b (71,6±6,7), Gr1c (89,6±7,4), Gr2a (101,1±6,0), Gr2b (96,4±9,0), Gr2c (112,6±7,3), Gr3a (74,0±6,5), Gr3b (66,0±12,7) e Gr3c (81,7±6,5). The polymerization in stove produced a higher microhardness than the other kinds of polymerization (p<0.05) and the microhardness of the resins statistically differed among them (p<0.05). Conclusion: The additional polymerization of the Filtek Z250 in the stove produced microhardness statistically higher than the others.Institute of Science and Technology of São José dos Campos2010-08-13info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://ojs.ict.unesp.br/index.php/cob/article/view/33310.14295/bds.2007.v10i2.333Brazilian Dental Science; Vol. 10 No. 2 (2007)Brazilian Dental Science; v. 10 n. 2 (2007)2178-6011reponame:Brazilian Dental Scienceinstname:Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)instacron:UNESPporhttps://ojs.ict.unesp.br/index.php/cob/article/view/333/261Lombardo, Geraldo Henrique L.Carvalho, Cristiane F.Galhano, GrazielaSouza, Rodrigo Othávio A.Júnior, Lafayete N.Pavanelli, Carlos Augustoinfo:eu-repo/semantics/openAccess2018-08-30T09:12:29Zoai:ojs.pkp.sfu.ca:article/333Revistahttp://bds.ict.unesp.br/PUBhttp://ojs.fosjc.unesp.br/index.php/index/oaisergio@fosjc.unesp.br||sergio@fosjc.unesp.br2178-60112178-6011opendoar:2022-11-08T16:29:31.979597Brazilian Dental Science - Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP)true |
dc.title.none.fl_str_mv |
Influence of additional polymerization in the microhardness of direct composite resins |
title |
Influence of additional polymerization in the microhardness of direct composite resins |
spellingShingle |
Influence of additional polymerization in the microhardness of direct composite resins Lombardo, Geraldo Henrique L. |
title_short |
Influence of additional polymerization in the microhardness of direct composite resins |
title_full |
Influence of additional polymerization in the microhardness of direct composite resins |
title_fullStr |
Influence of additional polymerization in the microhardness of direct composite resins |
title_full_unstemmed |
Influence of additional polymerization in the microhardness of direct composite resins |
title_sort |
Influence of additional polymerization in the microhardness of direct composite resins |
author |
Lombardo, Geraldo Henrique L. |
author_facet |
Lombardo, Geraldo Henrique L. Carvalho, Cristiane F. Galhano, Graziela Souza, Rodrigo Othávio A. Júnior, Lafayete N. Pavanelli, Carlos Augusto |
author_role |
author |
author2 |
Carvalho, Cristiane F. Galhano, Graziela Souza, Rodrigo Othávio A. Júnior, Lafayete N. Pavanelli, Carlos Augusto |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
Lombardo, Geraldo Henrique L. Carvalho, Cristiane F. Galhano, Graziela Souza, Rodrigo Othávio A. Júnior, Lafayete N. Pavanelli, Carlos Augusto |
description |
Objective: To evaluate different methods of additional polymerization in the Vickers’ microhardness of three composite resins. Material and Methods: With assistance of a metallic matrix (3 x 4mm), 30 specimens (sps) of each direct resin composite (drc) were prepared, entitled: Filtek Z250(3M ESPE, Saint Paul/MN-USA)(Gr1), W3D(Wilcos, Petrópolis/ RJ-Brazil)(Gr2), and EstheticX (Dentsply/York/PA-USA)(Gr3). All sps were photopolimerized, by the incremental technique, during 40 seconds (Gr1 - n=10: control). After that, 20 samples of each group were divided and half of the samples (n=10) were submitted to the additional polymerization during 15 minutes to 127ºC in autoclave (Gr2) and the other half in stove (Gr3). After all sps were stored in distilled water (37ºC/24 hours). The microhardness was accomplished in digital machine (Future-Tech, FM 700 Model), with 50kg of load. The data obtained (Kg/mm2) were analyzed utilizing the ANOVA Test (2 factors) and Tukey test (p<0.05). Results: The values of mean ± standar deviations obtained were: Gr1a(84,2±5,1), Gr1b (71,6±6,7), Gr1c (89,6±7,4), Gr2a (101,1±6,0), Gr2b (96,4±9,0), Gr2c (112,6±7,3), Gr3a (74,0±6,5), Gr3b (66,0±12,7) e Gr3c (81,7±6,5). The polymerization in stove produced a higher microhardness than the other kinds of polymerization (p<0.05) and the microhardness of the resins statistically differed among them (p<0.05). Conclusion: The additional polymerization of the Filtek Z250 in the stove produced microhardness statistically higher than the others. |
publishDate |
2010 |
dc.date.none.fl_str_mv |
2010-08-13 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://ojs.ict.unesp.br/index.php/cob/article/view/333 10.14295/bds.2007.v10i2.333 |
url |
https://ojs.ict.unesp.br/index.php/cob/article/view/333 |
identifier_str_mv |
10.14295/bds.2007.v10i2.333 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://ojs.ict.unesp.br/index.php/cob/article/view/333/261 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Institute of Science and Technology of São José dos Campos |
publisher.none.fl_str_mv |
Institute of Science and Technology of São José dos Campos |
dc.source.none.fl_str_mv |
Brazilian Dental Science; Vol. 10 No. 2 (2007) Brazilian Dental Science; v. 10 n. 2 (2007) 2178-6011 reponame:Brazilian Dental Science instname:Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Brazilian Dental Science |
collection |
Brazilian Dental Science |
repository.name.fl_str_mv |
Brazilian Dental Science - Universidade Estadual Paulista Júlio de Mesquita Filho (UNESP) |
repository.mail.fl_str_mv |
sergio@fosjc.unesp.br||sergio@fosjc.unesp.br |
_version_ |
1788346896892297216 |