Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain

Detalhes bibliográficos
Autor(a) principal: Lungareze, Daniel
Data de Publicação: 2019
Outros Autores: Cunha, Giovanni, Mariscal Muñoz, Eduardo, Fonseca, Renata Garcia, Adabo, Gelson
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Brazilian journal of oral sciences (Online)
Texto Completo: https://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/8655139
Resumo: Aim: This study investigated the influence of yttrium-stabilized tetragonal zirconia polycrystals (Y-TZP) thickness on fracture load of porcelain-veneered crowns (FL), fracture toughness of porcelain (FT), and the shear bond strength zirconia/porcelain (SBS). Methods: Artificial first molar was prepared for full crown (N=45) with different occlusal reduction. Y-TZP cores were made with different thickness at the occlusal face (1mm, 2mm and 3mm) (n=15). The cores were veneered with VM9 – Vita porcelain with 1.0 mm layer. For FL testing, axial load was applied to the mesiolingual cusp of the crowns.  For FT testing, flat Y-TZP plates (5X5 mm) with 1, 2 or 3 mm thickness were veneered with 1.0 mm porcelain layer (n=10). FT by indentation fracture technique was measured close to the interface and at the top surface. For SBS by knife-edge shearing rod, cylindrical porcelain with 5 mm in diameter and 3 mm was applied on flat Y-TZP plates (1, 2 and 3 mm thickness) (n = 10). Results: Data analyzed by 1-Way ANOVA for FL of crowns and SBS between Y-TZP and porcelain were not significant. Two-way ANOVA for FT was significant for zirconia thickness and measurement area. The post-hoc test showed higher values for the groups with 2 and 3mm, and higher values at the interface, irrespectively of Y-TZP thickness. Conclusion: The zirconia thickness did not affect the FL of veneered crowns and the SBS between the ceramics, but FT of porcelain was lower in thinner zirconia substructure and close to the interface Y-TZP/Porcelain.
id UNICAMP-8_a05153c0210e580c682b006f35da09ca
oai_identifier_str oai:ojs.periodicos.sbu.unicamp.br:article/8655139
network_acronym_str UNICAMP-8
network_name_str Brazilian journal of oral sciences (Online)
repository_id_str
spelling Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelainZirconiumDental porcelainFracture toughness.Aim: This study investigated the influence of yttrium-stabilized tetragonal zirconia polycrystals (Y-TZP) thickness on fracture load of porcelain-veneered crowns (FL), fracture toughness of porcelain (FT), and the shear bond strength zirconia/porcelain (SBS). Methods: Artificial first molar was prepared for full crown (N=45) with different occlusal reduction. Y-TZP cores were made with different thickness at the occlusal face (1mm, 2mm and 3mm) (n=15). The cores were veneered with VM9 – Vita porcelain with 1.0 mm layer. For FL testing, axial load was applied to the mesiolingual cusp of the crowns.  For FT testing, flat Y-TZP plates (5X5 mm) with 1, 2 or 3 mm thickness were veneered with 1.0 mm porcelain layer (n=10). FT by indentation fracture technique was measured close to the interface and at the top surface. For SBS by knife-edge shearing rod, cylindrical porcelain with 5 mm in diameter and 3 mm was applied on flat Y-TZP plates (1, 2 and 3 mm thickness) (n = 10). Results: Data analyzed by 1-Way ANOVA for FL of crowns and SBS between Y-TZP and porcelain were not significant. Two-way ANOVA for FT was significant for zirconia thickness and measurement area. The post-hoc test showed higher values for the groups with 2 and 3mm, and higher values at the interface, irrespectively of Y-TZP thickness. Conclusion: The zirconia thickness did not affect the FL of veneered crowns and the SBS between the ceramics, but FT of porcelain was lower in thinner zirconia substructure and close to the interface Y-TZP/Porcelain.Universidade Estadual de Campinas2019-04-08info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionOriginal articleapplication/pdfhttps://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/865513910.20396/bjos.v18i0.8655139Brazilian Journal of Oral Sciences; v. 18 (2019): Continuous Publication; e190919Brazilian Journal of Oral Sciences; Vol. 18 (2019): Continuous Publication; e1909191677-3225reponame:Brazilian journal of oral sciences (Online)instname:Universidade Estadual de Campinas (UNICAMP)instacron:UNICAMPenghttps://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/8655139/208172019Lungareze, DanielCunha, GiovanniMariscal Muñoz, EduardoFonseca, Renata GarciaAdabo, Gelsoninfo:eu-repo/semantics/openAccess2020-12-22T01:33:53Zoai:ojs.periodicos.sbu.unicamp.br:article/8655139Revistahttps://periodicos.sbu.unicamp.br/ojs/index.php/bjos/PUBhttps://periodicos.sbu.unicamp.br/ojs/index.php/bjos/oaibrjorals@fop.unicamp.br||brjorals@fop.unicamp.br1677-32251677-3217opendoar:2020-12-22T01:33:53Brazilian journal of oral sciences (Online) - Universidade Estadual de Campinas (UNICAMP)false
dc.title.none.fl_str_mv Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
title Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
spellingShingle Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
Lungareze, Daniel
Zirconium
Dental porcelain
Fracture toughness.
title_short Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
title_full Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
title_fullStr Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
title_full_unstemmed Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
title_sort Effect of zirconia substructure thickness on the mechanical properties and adhesion of veneering porcelain
author Lungareze, Daniel
author_facet Lungareze, Daniel
Cunha, Giovanni
Mariscal Muñoz, Eduardo
Fonseca, Renata Garcia
Adabo, Gelson
author_role author
author2 Cunha, Giovanni
Mariscal Muñoz, Eduardo
Fonseca, Renata Garcia
Adabo, Gelson
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Lungareze, Daniel
Cunha, Giovanni
Mariscal Muñoz, Eduardo
Fonseca, Renata Garcia
Adabo, Gelson
dc.subject.por.fl_str_mv Zirconium
Dental porcelain
Fracture toughness.
topic Zirconium
Dental porcelain
Fracture toughness.
description Aim: This study investigated the influence of yttrium-stabilized tetragonal zirconia polycrystals (Y-TZP) thickness on fracture load of porcelain-veneered crowns (FL), fracture toughness of porcelain (FT), and the shear bond strength zirconia/porcelain (SBS). Methods: Artificial first molar was prepared for full crown (N=45) with different occlusal reduction. Y-TZP cores were made with different thickness at the occlusal face (1mm, 2mm and 3mm) (n=15). The cores were veneered with VM9 – Vita porcelain with 1.0 mm layer. For FL testing, axial load was applied to the mesiolingual cusp of the crowns.  For FT testing, flat Y-TZP plates (5X5 mm) with 1, 2 or 3 mm thickness were veneered with 1.0 mm porcelain layer (n=10). FT by indentation fracture technique was measured close to the interface and at the top surface. For SBS by knife-edge shearing rod, cylindrical porcelain with 5 mm in diameter and 3 mm was applied on flat Y-TZP plates (1, 2 and 3 mm thickness) (n = 10). Results: Data analyzed by 1-Way ANOVA for FL of crowns and SBS between Y-TZP and porcelain were not significant. Two-way ANOVA for FT was significant for zirconia thickness and measurement area. The post-hoc test showed higher values for the groups with 2 and 3mm, and higher values at the interface, irrespectively of Y-TZP thickness. Conclusion: The zirconia thickness did not affect the FL of veneered crowns and the SBS between the ceramics, but FT of porcelain was lower in thinner zirconia substructure and close to the interface Y-TZP/Porcelain.
publishDate 2019
dc.date.none.fl_str_mv 2019-04-08
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Original article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/8655139
10.20396/bjos.v18i0.8655139
url https://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/8655139
identifier_str_mv 10.20396/bjos.v18i0.8655139
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://periodicos.sbu.unicamp.br/ojs/index.php/bjos/article/view/8655139/20817
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.coverage.none.fl_str_mv 2019
dc.publisher.none.fl_str_mv Universidade Estadual de Campinas
publisher.none.fl_str_mv Universidade Estadual de Campinas
dc.source.none.fl_str_mv Brazilian Journal of Oral Sciences; v. 18 (2019): Continuous Publication; e190919
Brazilian Journal of Oral Sciences; Vol. 18 (2019): Continuous Publication; e190919
1677-3225
reponame:Brazilian journal of oral sciences (Online)
instname:Universidade Estadual de Campinas (UNICAMP)
instacron:UNICAMP
instname_str Universidade Estadual de Campinas (UNICAMP)
instacron_str UNICAMP
institution UNICAMP
reponame_str Brazilian journal of oral sciences (Online)
collection Brazilian journal of oral sciences (Online)
repository.name.fl_str_mv Brazilian journal of oral sciences (Online) - Universidade Estadual de Campinas (UNICAMP)
repository.mail.fl_str_mv brjorals@fop.unicamp.br||brjorals@fop.unicamp.br
_version_ 1800216402349522944