Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network

Detalhes bibliográficos
Autor(a) principal: Grandinetti, Felipe Naressi
Data de Publicação: 2022
Outros Autores: Pugliese, Luiz Felipe, Braga, Rodrigo Aparecido da Silva, Oliveira, Tiago Gaiba de, Silva, Diogo Leonardo Ferreira da, Rodor, Fadul Ferrari
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Research, Society and Development
Texto Completo: https://rsdjournal.org/index.php/rsd/article/view/32542
Resumo: This work aims to use ESP32 and ESP8266 microprocessors with built-in Wi-Fi modules to activate the digital inputs of a PLC via the Web, in addition to sending the command signal via wireless network to the respective actuators of the system. A local wireless network is created to allow control of inputs via a browser on a cell phone or computers, such as allowing the exchange of information between the controller and its actuators. To test the functionality of the proposed prototype, a three-phase motor was started using the browser of a cell phone connected to the ESP32 Wi-Fi network.
id UNIFEI_5bd40cb479c2c1e23c98bef40bc1ff37
oai_identifier_str oai:ojs.pkp.sfu.ca:article/32542
network_acronym_str UNIFEI
network_name_str Research, Society and Development
repository_id_str
spelling Development and Implementation of Hardware to trigger I/O of a PLC via Wireless NetworkDesarrollo e Implementación de Hardware para Disparo de E/S de un PLC vía Red InalámbricaDesenvolvimento e Implementação de Hardware para Acionamento de I/O de um CLP via Rede Sem FioRede sem fioControlador lógico programávelSistemas embarcadosArduinoInternet das coisas.Wireless networkProgrammable logic controllersEmbedded systemsArduinoInternet of things.Red inalámbricaControlador lógico programableSistemas embebidosArduinoInternet de las cosas.This work aims to use ESP32 and ESP8266 microprocessors with built-in Wi-Fi modules to activate the digital inputs of a PLC via the Web, in addition to sending the command signal via wireless network to the respective actuators of the system. A local wireless network is created to allow control of inputs via a browser on a cell phone or computers, such as allowing the exchange of information between the controller and its actuators. To test the functionality of the proposed prototype, a three-phase motor was started using the browser of a cell phone connected to the ESP32 Wi-Fi network.El presente trabajo tiene como objetivo utilizar microprocesadores ESP32 y ESP8266 con módulo Wi-Fi incorporado para activar las entradas digitales de un PLC vía Web, además de enviar la señal de comando vía red inalámbrica a los respectivos actuadores del sistema. Se crea una red inalámbrica local para permitir el control de entradas vía navegador en el celular o computadora, además de permitir el intercambio de información entre el controlador y sus actuadores. Para probar la funcionalidad del equipo propuesto se puso en marcha un motor trifásico utilizando el navegador de un celular conectado a la red wifi ESP32.O presente trabalho tem o objetivo de utilizar microprocessadores ESP32 e ESP8266 com módulo Wi-Fi embutido para efetuar o acionamento das entradas digitais de um CLP via Web, além de enviar o sinal de comando via rede sem fio para os respectivos atuadores do sistema. Uma rede sem fio local é criada para possibilitar o controle das entradas via browser no celular ou computador, como permitir a troca de informação entre o controlador e seus atuadores. A fim de testar a funcionalidade do equipamento proposto, foi efetuada a partida de um motor trifásico utilizando o navegador de um celular conectado à rede Wi-Fi do ESP32.Research, Society and Development2022-08-03info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3254210.33448/rsd-v11i10.32542Research, Society and Development; Vol. 11 No. 10; e345111032542Research, Society and Development; Vol. 11 Núm. 10; e345111032542Research, Society and Development; v. 11 n. 10; e3451110325422525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/32542/27853Copyright (c) 2022 Felipe Naressi Grandinetti; Luiz Felipe Pugliese; Rodrigo Aparecido da Silva Braga; Tiago Gaiba de Oliveira; Diogo Leonardo Ferreira da Silva; Fadul Ferrari Rodorhttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessGrandinetti, Felipe NaressiPugliese, Luiz Felipe Braga, Rodrigo Aparecido da SilvaOliveira, Tiago Gaiba deSilva, Diogo Leonardo Ferreira daRodor, Fadul Ferrari2022-08-12T22:23:03Zoai:ojs.pkp.sfu.ca:article/32542Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:48:30.625111Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false
dc.title.none.fl_str_mv Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
Desarrollo e Implementación de Hardware para Disparo de E/S de un PLC vía Red Inalámbrica
Desenvolvimento e Implementação de Hardware para Acionamento de I/O de um CLP via Rede Sem Fio
title Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
spellingShingle Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
Grandinetti, Felipe Naressi
Rede sem fio
Controlador lógico programável
Sistemas embarcados
Arduino
Internet das coisas.
Wireless network
Programmable logic controllers
Embedded systems
Arduino
Internet of things.
Red inalámbrica
Controlador lógico programable
Sistemas embebidos
Arduino
Internet de las cosas.
title_short Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
title_full Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
title_fullStr Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
title_full_unstemmed Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
title_sort Development and Implementation of Hardware to trigger I/O of a PLC via Wireless Network
author Grandinetti, Felipe Naressi
author_facet Grandinetti, Felipe Naressi
Pugliese, Luiz Felipe
Braga, Rodrigo Aparecido da Silva
Oliveira, Tiago Gaiba de
Silva, Diogo Leonardo Ferreira da
Rodor, Fadul Ferrari
author_role author
author2 Pugliese, Luiz Felipe
Braga, Rodrigo Aparecido da Silva
Oliveira, Tiago Gaiba de
Silva, Diogo Leonardo Ferreira da
Rodor, Fadul Ferrari
author2_role author
author
author
author
author
dc.contributor.author.fl_str_mv Grandinetti, Felipe Naressi
Pugliese, Luiz Felipe
Braga, Rodrigo Aparecido da Silva
Oliveira, Tiago Gaiba de
Silva, Diogo Leonardo Ferreira da
Rodor, Fadul Ferrari
dc.subject.por.fl_str_mv Rede sem fio
Controlador lógico programável
Sistemas embarcados
Arduino
Internet das coisas.
Wireless network
Programmable logic controllers
Embedded systems
Arduino
Internet of things.
Red inalámbrica
Controlador lógico programable
Sistemas embebidos
Arduino
Internet de las cosas.
topic Rede sem fio
Controlador lógico programável
Sistemas embarcados
Arduino
Internet das coisas.
Wireless network
Programmable logic controllers
Embedded systems
Arduino
Internet of things.
Red inalámbrica
Controlador lógico programable
Sistemas embebidos
Arduino
Internet de las cosas.
description This work aims to use ESP32 and ESP8266 microprocessors with built-in Wi-Fi modules to activate the digital inputs of a PLC via the Web, in addition to sending the command signal via wireless network to the respective actuators of the system. A local wireless network is created to allow control of inputs via a browser on a cell phone or computers, such as allowing the exchange of information between the controller and its actuators. To test the functionality of the proposed prototype, a three-phase motor was started using the browser of a cell phone connected to the ESP32 Wi-Fi network.
publishDate 2022
dc.date.none.fl_str_mv 2022-08-03
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/32542
10.33448/rsd-v11i10.32542
url https://rsdjournal.org/index.php/rsd/article/view/32542
identifier_str_mv 10.33448/rsd-v11i10.32542
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/32542/27853
dc.rights.driver.fl_str_mv https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Research, Society and Development
publisher.none.fl_str_mv Research, Society and Development
dc.source.none.fl_str_mv Research, Society and Development; Vol. 11 No. 10; e345111032542
Research, Society and Development; Vol. 11 Núm. 10; e345111032542
Research, Society and Development; v. 11 n. 10; e345111032542
2525-3409
reponame:Research, Society and Development
instname:Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI
instname_str Universidade Federal de Itajubá (UNIFEI)
instacron_str UNIFEI
institution UNIFEI
reponame_str Research, Society and Development
collection Research, Society and Development
repository.name.fl_str_mv Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)
repository.mail.fl_str_mv rsd.articles@gmail.com
_version_ 1797052769306148864

Registros relacionados