Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings

Detalhes bibliográficos
Autor(a) principal: Costa, Raniere Fernandes
Data de Publicação: 2022
Outros Autores: Ferreira , Alysson Dantas, Nascimento, José Jefferson da Silva, Rezende, Maria Luiza de Souza, Silva Junior, José Jorge da, Meira, Ariadne Soares, Vieira, Antônio Nunes de Oliveira
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Research, Society and Development
Texto Completo: https://rsdjournal.org/index.php/rsd/article/view/32174
Resumo: The drying stage is the most relevant procedure in the industrial production of ceramic bricks, since the final quality of the product is directly related to the success of this operation. Knowledge of the material's thermal and mass diffusivity facilitates mathematical modeling, which brings us a greater domain of the process. With this purpose, the drying of solid ceramic bricks with different percentages of diatomite tailings was experimentally carried out in an oven with forced air circulation.  The experiments were performed based on a 2k experimental design with three factors: the drying temperatures (333 and 383 K), the homogenization time of the mixture (30 and 60 min), and the percentage of tailings (10 and 30%). From the results matrix, we applied the Levenberg-Marquardt algorithm to minimize the difference between the theoretical and the experimental drying and heating curves, thus obtaining the thermal and mass diffusivities. Still in possession of the results matrix, we applied a regression model in order to obtain an equation to estimate the diffusivity values. The drying and heating curves that were built from the estimated diffusivities showed good agreement with the experimental data, and were validated within a 99% confidence interval.
id UNIFEI_f064f2a4f6a9a5fa514d6a8b9ae07cc8
oai_identifier_str oai:ojs.pkp.sfu.ca:article/32174
network_acronym_str UNIFEI
network_name_str Research, Society and Development
repository_id_str
spelling Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailingsObtención de difusividad térmica y másica del proceso de secado sobre placas cerámicas con adición de relaves de diatomeasObtenção da difusividade térmica e mássica do processo de secagem sobre tijolos cerâmicos com adição de rejeitos de diatomitaSecagemDifusividade de massaDifusividade térmicaParâmetros estimados de difusividade.DryingMass diffusivityThermal diffusivityDiffusivity estimated parameters.SecadoDifusividad de masaDifusividad térmicaParámetros estimados de difusividad.The drying stage is the most relevant procedure in the industrial production of ceramic bricks, since the final quality of the product is directly related to the success of this operation. Knowledge of the material's thermal and mass diffusivity facilitates mathematical modeling, which brings us a greater domain of the process. With this purpose, the drying of solid ceramic bricks with different percentages of diatomite tailings was experimentally carried out in an oven with forced air circulation.  The experiments were performed based on a 2k experimental design with three factors: the drying temperatures (333 and 383 K), the homogenization time of the mixture (30 and 60 min), and the percentage of tailings (10 and 30%). From the results matrix, we applied the Levenberg-Marquardt algorithm to minimize the difference between the theoretical and the experimental drying and heating curves, thus obtaining the thermal and mass diffusivities. Still in possession of the results matrix, we applied a regression model in order to obtain an equation to estimate the diffusivity values. The drying and heating curves that were built from the estimated diffusivities showed good agreement with the experimental data, and were validated within a 99% confidence interval.La etapa de secado es el procedimiento más relevante en la producción industrial de ladrillos cerámicos, ya que la calidad final del producto está directamente relacionada con el éxito de esta operación. El conocimiento de la difusividad térmica y másica del material facilita el modelado matemático, lo que nos aporta un mayor dominio del proceso. Con este propósito, se realizó experimentalmente el secado de ladrillos cerámicos macizos con diferentes porcentajes de relaves de diatomeas en un horno con circulación de aire forzado. Los experimentos se realizaron en base a un diseño experimental 2k con tres factores: las temperaturas de secado (333 y 383 K), el tiempo de homogeneización de la mezcla (30 y 60 min), y el porcentaje de relaves (10 y 30%). A partir de la matriz de resultados, se aplicó el algoritmo de Levenberg-Marquardt para minimizar la diferencia entre las curvas de secado y calentamiento teóricas y experimentales, obteniendo así las difusividades térmica y másica. Todavía en posesión de la matriz de resultados, aplicamos un modelo de regresión para obtener una ecuación para estimar los valores de difusividad. Las curvas de secado y calentamiento que se construyeron a partir de las difusividades estimadas mostraron una buena concordancia con los datos experimentales y se validaron dentro de un intervalo de confianza del 99 %.A etapa de secagem é o procedimento mais relevante na produção industrial de tijolos cerâmicos, pois a qualidade final do produto está diretamente relacionada ao sucesso desta operação. O conhecimento da difusividade térmica e de massa do material facilita a modelagem matemática, o que nos traz um maior domínio do processo. Para tanto, foi realizada experimentalmente a secagem de tijolos cerâmicos maciços com diferentes porcentagens de rejeitos de diatomita em estufa com circulação forçada de ar. Os experimentos foram realizados com base em um delineamento experimental de 2k com três fatores: as temperaturas de secagem (333 e 383 K), o tempo de homogeneização da mistura (30 e 60 min) e a porcentagem de rejeitos (10 e 30%). A partir da matriz de resultados, aplicamos o algoritmo de Levenberg-Marquardt para minimizar a diferença entre as curvas de secagem e aquecimento teórica e experimental, obtendo assim as difusividades térmica e de massa. Ainda de posse da matriz de resultados, aplicamos um modelo de regressão para obter uma equação para estimar os valores de difusividade. As curvas de secagem e aquecimento construídas a partir das difusividades estimadas mostraram boa concordância com os dados experimentais e foram validadas dentro de um intervalo de confiança de 99%.Research, Society and Development2022-08-05info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3217410.33448/rsd-v11i10.32174Research, Society and Development; Vol. 11 No. 10; e410111032174Research, Society and Development; Vol. 11 Núm. 10; e410111032174Research, Society and Development; v. 11 n. 10; e4101110321742525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/32174/27919Copyright (c) 2022 Raniere Fernandes Costa; Alysson Dantas Ferreira ; José Jefferson da Silva Nascimento; Maria Luiza de Souza Rezende; José Jorge da Silva Junior; Ariadne Soares Meira; Antônio Nunes de Oliveira Vieirahttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessCosta, Raniere Fernandes Ferreira , Alysson Dantas Nascimento, José Jefferson da Silva Rezende, Maria Luiza de SouzaSilva Junior, José Jorge daMeira, Ariadne SoaresVieira, Antônio Nunes de Oliveira2022-08-12T22:23:03Zoai:ojs.pkp.sfu.ca:article/32174Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:48:15.602573Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false
dc.title.none.fl_str_mv Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
Obtención de difusividad térmica y másica del proceso de secado sobre placas cerámicas con adición de relaves de diatomeas
Obtenção da difusividade térmica e mássica do processo de secagem sobre tijolos cerâmicos com adição de rejeitos de diatomita
title Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
spellingShingle Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
Costa, Raniere Fernandes
Secagem
Difusividade de massa
Difusividade térmica
Parâmetros estimados de difusividade.
Drying
Mass diffusivity
Thermal diffusivity
Diffusivity estimated parameters.
Secado
Difusividad de masa
Difusividad térmica
Parámetros estimados de difusividad.
title_short Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
title_full Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
title_fullStr Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
title_full_unstemmed Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
title_sort Obtaining thermal and mass diffusivity of the drying process on ceramic plates with the addition of diatomite tailings
author Costa, Raniere Fernandes
author_facet Costa, Raniere Fernandes
Ferreira , Alysson Dantas
Nascimento, José Jefferson da Silva
Rezende, Maria Luiza de Souza
Silva Junior, José Jorge da
Meira, Ariadne Soares
Vieira, Antônio Nunes de Oliveira
author_role author
author2 Ferreira , Alysson Dantas
Nascimento, José Jefferson da Silva
Rezende, Maria Luiza de Souza
Silva Junior, José Jorge da
Meira, Ariadne Soares
Vieira, Antônio Nunes de Oliveira
author2_role author
author
author
author
author
author
dc.contributor.author.fl_str_mv Costa, Raniere Fernandes
Ferreira , Alysson Dantas
Nascimento, José Jefferson da Silva
Rezende, Maria Luiza de Souza
Silva Junior, José Jorge da
Meira, Ariadne Soares
Vieira, Antônio Nunes de Oliveira
dc.subject.por.fl_str_mv Secagem
Difusividade de massa
Difusividade térmica
Parâmetros estimados de difusividade.
Drying
Mass diffusivity
Thermal diffusivity
Diffusivity estimated parameters.
Secado
Difusividad de masa
Difusividad térmica
Parámetros estimados de difusividad.
topic Secagem
Difusividade de massa
Difusividade térmica
Parâmetros estimados de difusividade.
Drying
Mass diffusivity
Thermal diffusivity
Diffusivity estimated parameters.
Secado
Difusividad de masa
Difusividad térmica
Parámetros estimados de difusividad.
description The drying stage is the most relevant procedure in the industrial production of ceramic bricks, since the final quality of the product is directly related to the success of this operation. Knowledge of the material's thermal and mass diffusivity facilitates mathematical modeling, which brings us a greater domain of the process. With this purpose, the drying of solid ceramic bricks with different percentages of diatomite tailings was experimentally carried out in an oven with forced air circulation.  The experiments were performed based on a 2k experimental design with three factors: the drying temperatures (333 and 383 K), the homogenization time of the mixture (30 and 60 min), and the percentage of tailings (10 and 30%). From the results matrix, we applied the Levenberg-Marquardt algorithm to minimize the difference between the theoretical and the experimental drying and heating curves, thus obtaining the thermal and mass diffusivities. Still in possession of the results matrix, we applied a regression model in order to obtain an equation to estimate the diffusivity values. The drying and heating curves that were built from the estimated diffusivities showed good agreement with the experimental data, and were validated within a 99% confidence interval.
publishDate 2022
dc.date.none.fl_str_mv 2022-08-05
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/32174
10.33448/rsd-v11i10.32174
url https://rsdjournal.org/index.php/rsd/article/view/32174
identifier_str_mv 10.33448/rsd-v11i10.32174
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://rsdjournal.org/index.php/rsd/article/view/32174/27919
dc.rights.driver.fl_str_mv https://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv https://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Research, Society and Development
publisher.none.fl_str_mv Research, Society and Development
dc.source.none.fl_str_mv Research, Society and Development; Vol. 11 No. 10; e410111032174
Research, Society and Development; Vol. 11 Núm. 10; e410111032174
Research, Society and Development; v. 11 n. 10; e410111032174
2525-3409
reponame:Research, Society and Development
instname:Universidade Federal de Itajubá (UNIFEI)
instacron:UNIFEI
instname_str Universidade Federal de Itajubá (UNIFEI)
instacron_str UNIFEI
institution UNIFEI
reponame_str Research, Society and Development
collection Research, Society and Development
repository.name.fl_str_mv Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)
repository.mail.fl_str_mv rsd.articles@gmail.com
_version_ 1797052717812678656