Indirect restorations in composite resin in cavities with different depths: Case report
Autor(a) principal: | |
---|---|
Data de Publicação: | 2021 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/14439 |
Resumo: | Indirect composite resin restorations are commonly used on posterior teeth in different cavities, allowing greater wear resistance, marginal adaptation, establishment of proximal contacts and greater hardness, since it undergoes the process of thermopolymerization. The aim of this study is to report a clinical case of replacing amalgam restorations by indirect restorations in composite resin in cavities with different depths. Female patient, 34 years old, went to the dental clinic of a private institution, complaining of aesthetic dissatisfaction in amalgam restorations on teeth 45, 46 and 47. After clinical examination, due to the extension of the cavities, it was suggested to perform indirect restorations in composite resin in the three elements. After removing the amalgam, with a diamond tip, the depths of the tooth cavities were evaluated. In tooth 45, an endodontic treatment and installation of a fiberglass pin were performed. In tooth 46, an indirect pulp capping was performed and in tooth 47, no pulp treatment was performed. Subsequently, the teeth were prepared for indirect restorations with diamond tip # 3131, then they were molded with addition silicone, proceeding with casting of the mold, with type IV plaster. The model was die-cut using the double casting technique and the composite resin restorations were made on the model. In the following session, the restorations were cemented with dual self-adhesive resin cement. Finally, occlusal adjustment was performed, followed by finishing and polishing. The therapies employed were effective in recovering the anatomical and aesthetic shape of the dental elements involved. |
id |
UNIFEI_f0fdf14321c27d7868788065777fcfb1 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/14439 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Indirect restorations in composite resin in cavities with different depths: Case reportRestauraciones indirectas en resina compuesta en cavidades de diferentes profundidades: Reporte de casoRestaurações indiretas em resina composta em cavidades com diferentes profundidades: Relato de casoDental AestheticsOral rehabilitationComposite resins.Estética dentalRehabilitación oralResinas compuestas.Estética DentalReabilitação BucalResinas compostas.Indirect composite resin restorations are commonly used on posterior teeth in different cavities, allowing greater wear resistance, marginal adaptation, establishment of proximal contacts and greater hardness, since it undergoes the process of thermopolymerization. The aim of this study is to report a clinical case of replacing amalgam restorations by indirect restorations in composite resin in cavities with different depths. Female patient, 34 years old, went to the dental clinic of a private institution, complaining of aesthetic dissatisfaction in amalgam restorations on teeth 45, 46 and 47. After clinical examination, due to the extension of the cavities, it was suggested to perform indirect restorations in composite resin in the three elements. After removing the amalgam, with a diamond tip, the depths of the tooth cavities were evaluated. In tooth 45, an endodontic treatment and installation of a fiberglass pin were performed. In tooth 46, an indirect pulp capping was performed and in tooth 47, no pulp treatment was performed. Subsequently, the teeth were prepared for indirect restorations with diamond tip # 3131, then they were molded with addition silicone, proceeding with casting of the mold, with type IV plaster. The model was die-cut using the double casting technique and the composite resin restorations were made on the model. In the following session, the restorations were cemented with dual self-adhesive resin cement. Finally, occlusal adjustment was performed, followed by finishing and polishing. The therapies employed were effective in recovering the anatomical and aesthetic shape of the dental elements involved.Las restauraciones indirectas de resina compuesta se utilizan comúnmente en dientes posteriores en diferentes cavidades, permitiendo mayor resistencia al desgaste, adaptación marginal, establecimiento de contactos proximales y mayor dureza, ya que sufre el proceso de termopolimerización. El objetivo de este estudio es reportar un caso clínico de sustitución de restauraciones de amalgama por restauraciones indirectas en resina compuesta en cavidades con diferentes profundidades. Paciente de sexo femenino, 34 años, acudió a la clínica odontológica de una institución privada, quejándose de insatisfacción estética en las restauraciones de amalgama en los dientes 45, 46 y 47. Tras el examen clínico, debido a la extensión de las caries, se sugirió realizar restauraciones indirectas en resina compuesta en los tres elementos. Después de retirar la amalgama, con una punta de diamante, se evaluó la profundidad de las caries dentales. En el diente 45 se realizó un tratamiento de endodoncia e instalación de un pin de fibra de vidrio. En el diente 46 se realizó un recubrimiento pulpar indirecto y en el 47 no se realizó tratamiento pulpar. Posteriormente, se prepararon los dientes para restauraciones indirectas con punta de diamante # 3131, luego se moldearon con silicona de adición, procediendo al vaciado del molde, con yeso tipo IV. El modelo se fundió a presión mediante la técnica de doble colada y las restauraciones de resina compuesta se realizaron sobre el modelo. En la siguiente sesión, las restauraciones se cementaron con cemento de resina dual autoadhesivo. Finalmente, se realizó el ajuste oclusal, seguido del acabado y pulido. Las terapias empleadas fueron efectivas para recuperar la forma anatómica y estética de los elementos dentales involucrados.Restaurações indiretas em resina composta são comumente usadas em dentes posteriores nas diferentes cavidades, permitindo maior resistência ao desgaste, adaptação marginal, estabelecimento de contatos proximais e maior dureza, uma vez que passam pelo processo de termopolimerização. O objetivo desse estudo é relatar um caso clínico de substituição de restaurações em amálgama por restaurações indiretas em resina composta em cavidades com diferentes profundidades. Paciente, sexo feminino, 34 anos, procurou a clínica odontológica de uma instituição privada, queixando-se de insatisfação estética nas restaurações em amálgama nos dentes 45, 46 e 47. Após exame clínico, devido à extensão das cavidades, foi sugerido a realização de restaurações indiretas em resina composta nos três elementos. Após a remoção do amalgama, com ponta diamantada, avaliou-se as profundidades das cavidades dos dentes. No dente 45, realizou-se tratamento endodôntico e instalação de pino de fibra de vidro. No dente 46 foi realizado um capeamento pulpar indireto e no dente 47 não foi realizado nenhum tratamento de proteção pulpar. Posteriormente, os dentes foram preparados para restaurações indiretas com ponta diamantada #3131, em seguida, foram moldados com silicone de adição, prosseguindo com vazamento do molde com gesso tipo IV. O modelo foi troquelizado pela técnica de duplo vazamento e as restaurações em resina composta foram confeccionadas sobre o modelo. Na sessão seguinte, as restaurações foram cimentadas com cimento resinoso dual autoadesivo. Por fim, foi realizado o ajuste oclusal, seguido do acabamento e polimento. As terapêuticas empregadas foram eficazes para recuperar a forma anatômica e estética dos elementos dentários envolvidos.Research, Society and Development2021-04-24info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/1443910.33448/rsd-v10i4.14439Research, Society and Development; Vol. 10 No. 4; e58810414439Research, Society and Development; Vol. 10 Núm. 4; e58810414439Research, Society and Development; v. 10 n. 4; e588104144392525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/14439/13037Copyright (c) 2021 Juliana Lisboa Feitoza Lira; Lidiane Lins Dutra; Valéria Cristina Rodrigues da Costa ; Maria Emanuella Letícia da Silva; Natália Gomes de Oliveira; Luís Felipe Espíndola-Castrohttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessLira, Juliana Lisboa Feitoza Dutra, Lidiane Lins Costa , Valéria Cristina Rodrigues da Silva, Maria Emanuella Letícia da Oliveira, Natália Gomes de Espíndola-Castro, Luís Felipe2021-04-25T11:21:26Zoai:ojs.pkp.sfu.ca:article/14439Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:35:34.328024Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Indirect restorations in composite resin in cavities with different depths: Case report Restauraciones indirectas en resina compuesta en cavidades de diferentes profundidades: Reporte de caso Restaurações indiretas em resina composta em cavidades com diferentes profundidades: Relato de caso |
title |
Indirect restorations in composite resin in cavities with different depths: Case report |
spellingShingle |
Indirect restorations in composite resin in cavities with different depths: Case report Lira, Juliana Lisboa Feitoza Dental Aesthetics Oral rehabilitation Composite resins. Estética dental Rehabilitación oral Resinas compuestas. Estética Dental Reabilitação Bucal Resinas compostas. |
title_short |
Indirect restorations in composite resin in cavities with different depths: Case report |
title_full |
Indirect restorations in composite resin in cavities with different depths: Case report |
title_fullStr |
Indirect restorations in composite resin in cavities with different depths: Case report |
title_full_unstemmed |
Indirect restorations in composite resin in cavities with different depths: Case report |
title_sort |
Indirect restorations in composite resin in cavities with different depths: Case report |
author |
Lira, Juliana Lisboa Feitoza |
author_facet |
Lira, Juliana Lisboa Feitoza Dutra, Lidiane Lins Costa , Valéria Cristina Rodrigues da Silva, Maria Emanuella Letícia da Oliveira, Natália Gomes de Espíndola-Castro, Luís Felipe |
author_role |
author |
author2 |
Dutra, Lidiane Lins Costa , Valéria Cristina Rodrigues da Silva, Maria Emanuella Letícia da Oliveira, Natália Gomes de Espíndola-Castro, Luís Felipe |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
Lira, Juliana Lisboa Feitoza Dutra, Lidiane Lins Costa , Valéria Cristina Rodrigues da Silva, Maria Emanuella Letícia da Oliveira, Natália Gomes de Espíndola-Castro, Luís Felipe |
dc.subject.por.fl_str_mv |
Dental Aesthetics Oral rehabilitation Composite resins. Estética dental Rehabilitación oral Resinas compuestas. Estética Dental Reabilitação Bucal Resinas compostas. |
topic |
Dental Aesthetics Oral rehabilitation Composite resins. Estética dental Rehabilitación oral Resinas compuestas. Estética Dental Reabilitação Bucal Resinas compostas. |
description |
Indirect composite resin restorations are commonly used on posterior teeth in different cavities, allowing greater wear resistance, marginal adaptation, establishment of proximal contacts and greater hardness, since it undergoes the process of thermopolymerization. The aim of this study is to report a clinical case of replacing amalgam restorations by indirect restorations in composite resin in cavities with different depths. Female patient, 34 years old, went to the dental clinic of a private institution, complaining of aesthetic dissatisfaction in amalgam restorations on teeth 45, 46 and 47. After clinical examination, due to the extension of the cavities, it was suggested to perform indirect restorations in composite resin in the three elements. After removing the amalgam, with a diamond tip, the depths of the tooth cavities were evaluated. In tooth 45, an endodontic treatment and installation of a fiberglass pin were performed. In tooth 46, an indirect pulp capping was performed and in tooth 47, no pulp treatment was performed. Subsequently, the teeth were prepared for indirect restorations with diamond tip # 3131, then they were molded with addition silicone, proceeding with casting of the mold, with type IV plaster. The model was die-cut using the double casting technique and the composite resin restorations were made on the model. In the following session, the restorations were cemented with dual self-adhesive resin cement. Finally, occlusal adjustment was performed, followed by finishing and polishing. The therapies employed were effective in recovering the anatomical and aesthetic shape of the dental elements involved. |
publishDate |
2021 |
dc.date.none.fl_str_mv |
2021-04-24 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/14439 10.33448/rsd-v10i4.14439 |
url |
https://rsdjournal.org/index.php/rsd/article/view/14439 |
identifier_str_mv |
10.33448/rsd-v10i4.14439 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/14439/13037 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 10 No. 4; e58810414439 Research, Society and Development; Vol. 10 Núm. 4; e58810414439 Research, Society and Development; v. 10 n. 4; e58810414439 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052748036833280 |