Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/32681 |
Resumo: | Objective: To identify information concerning nursing care in the treatment of pressure injuries with low-level laser; To prototype a software with information about nursing care in the treatment of pressure injuries with low-level laser to support professional clinical decision-making. Methodology: Qualitative research, of the methodological study type, through Prototyping. The Operationalization method was used, through cyclic prototyping, carried out through four stages, in the present study developed until the third stage, leaving the fourth stage for future studies. Results: They were divided into the 3 methodological stages in which the study was developed. 1, communication, there was a discussion about the use of low-level laser by nurses in the treatment of wounds, then the existence of technologies with information to treat pressure injuries with laser therapy was observed and mapped. 2, rapid planning, operating system usage was defined, budget planning, graphic scheme, and written content definition. 3, construction of the prototype itself with all the screens proposed in the graphic scheme, budget planning, graphic scheme, and definition of the written content. Conclusion: It is concluded, therefore, that the objectives of the study were covered, and that there is a need to develop more studies like this one, in order to reaffirm the importance of technology and health education, which will have direct effects on care , in teaching and research. |
id |
UNIFEI_f6654ef7993d00cd8d4da244fcfa1de3 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/32681 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laserDesarrollo de un prototipo de software de apoyo a la toma de decisiones clínicas: cuidados de enfermería en el tratamiento de lesiones por presión con láser de baja intensidadDesenvolvimento de um software-protótipo para apoio a tomada de decisão clínica: assistência de enfermagem no tratamento de lesões por pressão com laser de baixa intensidadeLesión por presiónCuidado de enfermeraTerapia de luz de baja intensidadTecnología de la Información en salud.Pressure injuryNursing careLow-intensity light therapyHealth information technology.Lesão por pressãoCuidados de EnfermagemTerapia com luz de baixa intensidadeTecnologia da informação em saúde.Objective: To identify information concerning nursing care in the treatment of pressure injuries with low-level laser; To prototype a software with information about nursing care in the treatment of pressure injuries with low-level laser to support professional clinical decision-making. Methodology: Qualitative research, of the methodological study type, through Prototyping. The Operationalization method was used, through cyclic prototyping, carried out through four stages, in the present study developed until the third stage, leaving the fourth stage for future studies. Results: They were divided into the 3 methodological stages in which the study was developed. 1, communication, there was a discussion about the use of low-level laser by nurses in the treatment of wounds, then the existence of technologies with information to treat pressure injuries with laser therapy was observed and mapped. 2, rapid planning, operating system usage was defined, budget planning, graphic scheme, and written content definition. 3, construction of the prototype itself with all the screens proposed in the graphic scheme, budget planning, graphic scheme, and definition of the written content. Conclusion: It is concluded, therefore, that the objectives of the study were covered, and that there is a need to develop more studies like this one, in order to reaffirm the importance of technology and health education, which will have direct effects on care , in teaching and research.Objetivo: Identificar informaciones relativas a los cuidados de enfermería en el tratamiento de lesiones por presión con láser de bajo nivel; Prototipar un software con información sobre cuidados de enfermería en el tratamiento de lesiones por presión con láser de baja intensidad para apoyar la toma de decisiones clínicas profesionales. Metodología: Investigación cualitativa, del tipo estudio metodológico, a través de Prototipado. Se utilizó el método de Operacionalización, a través de prototipado cíclico, realizado a través de cuatro etapas, en el presente estudio se desarrolló hasta la tercera etapa, dejando la cuarta etapa para futuros estudios. Resultados: Se dividieron en las 3 etapas metodológicas en las que se desarrolló el estudio. 1, comunicación, se discutió sobre el uso del láser de baja intensidad por parte de los enfermeros en el tratamiento de heridas, luego se observó y mapeó la existencia de tecnologías con información para el tratamiento de lesiones por presión con terapia láser. 2, se definió la planificación rápida, el uso del sistema operativo, la planificación del presupuesto, el esquema gráfico y la definición del contenido escrito. 3, construcción del propio prototipo con todas las pantallas propuestas en el esquema gráfico, planificación presupuestaria, esquema gráfico y definición del contenido escrito. Conclusión: Se concluye, por tanto, que los objetivos del estudio fueron cubiertos, y que existe la necesidad de desarrollar más estudios como este, con el fin de reafirmar la importancia de la tecnología y la educación en salud, que tendrán efectos directos en el cuidado , en la docencia y la investigación.Objetivo: Identificar as informações concernentes a assistência de enfermagem no tratamento de lesões por pressão com laser de baixa intensidade; Prototipar um software com informações sobre a assistência de enfermagem no tratamento de lesões por pressão com laser de baixa intensidade para apoio profissional a tomada de decisão clínica. Metodologia: Pesquisa qualitativa, do tipo estudo metodológico, por meio da Prototipação. O método de Operacionalização foi utilizado, através da prototipação cíclica, realizada por meio de quatro etapas, no presente estudo desenvolvida até a terceira etapa, ficando a quarta etapa para estudos futuros. Resultados: Foram divididos nas 3 etapas metodológicas em que o estudo foi desenvolvido. 1, comunicação, foi feita uma discussão sobre o uso do laser de baixa intensidade por enfermeiros no tratamento de feridas, na sequência foi observada e mapeada a existência de tecnologias com informação para tratar lesões por pressão com a laserterapia. 2, planejamento rápido, foi definido o sistema operacional de uso, planejamento orçamentário, esquema gráfico, e definição do conteúdo escrito. 3, construção do protótipo propriamente dito com todas as telas propostas no esquema gráfico, planejamento orçamentário, esquema gráfico, e definição do conteúdo escrito. Conclusão: Conclui-se, portanto, que os objetivos do estudo foram contemplados, e que existe a necessidade do desenvolvimento de mais estudos como este, para que se reafirme a importância da tecnologia e da educação em saúde, o que trará reflexos direitos na assistência, no ensino e pesquisa.Research, Society and Development2022-08-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3268110.33448/rsd-v11i10.32681Research, Society and Development; Vol. 11 No. 10; e304111032681Research, Society and Development; Vol. 11 Núm. 10; e304111032681Research, Society and Development; v. 11 n. 10; e3041110326812525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIporhttps://rsdjournal.org/index.php/rsd/article/view/32681/27804Copyright (c) 2022 Danilo Lima Ceccon; Gunnar Glauco de Cunto Carelli ; Roberto Carlos Lyra da Silva; Lidiane da Fonseca Moura Louro; Daniel Aragão Machado; Thiago Quinellato Lourohttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessCeccon, Danilo Lima Carelli , Gunnar Glauco de Cunto Silva, Roberto Carlos Lyra da Louro, Lidiane da Fonseca Moura Machado, Daniel Aragão Louro, Thiago Quinellato 2022-08-12T22:23:03Zoai:ojs.pkp.sfu.ca:article/32681Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:48:35.924265Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser Desarrollo de un prototipo de software de apoyo a la toma de decisiones clínicas: cuidados de enfermería en el tratamiento de lesiones por presión con láser de baja intensidad Desenvolvimento de um software-protótipo para apoio a tomada de decisão clínica: assistência de enfermagem no tratamento de lesões por pressão com laser de baixa intensidade |
title |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser |
spellingShingle |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser Ceccon, Danilo Lima Lesión por presión Cuidado de enfermera Terapia de luz de baja intensidad Tecnología de la Información en salud. Pressure injury Nursing care Low-intensity light therapy Health information technology. Lesão por pressão Cuidados de Enfermagem Terapia com luz de baixa intensidade Tecnologia da informação em saúde. |
title_short |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser |
title_full |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser |
title_fullStr |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser |
title_full_unstemmed |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser |
title_sort |
Development of a prototype software to support clinical decision-making: nursing care in the treatment of pressure by pressure with low-level laser |
author |
Ceccon, Danilo Lima |
author_facet |
Ceccon, Danilo Lima Carelli , Gunnar Glauco de Cunto Silva, Roberto Carlos Lyra da Louro, Lidiane da Fonseca Moura Machado, Daniel Aragão Louro, Thiago Quinellato |
author_role |
author |
author2 |
Carelli , Gunnar Glauco de Cunto Silva, Roberto Carlos Lyra da Louro, Lidiane da Fonseca Moura Machado, Daniel Aragão Louro, Thiago Quinellato |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
Ceccon, Danilo Lima Carelli , Gunnar Glauco de Cunto Silva, Roberto Carlos Lyra da Louro, Lidiane da Fonseca Moura Machado, Daniel Aragão Louro, Thiago Quinellato |
dc.subject.por.fl_str_mv |
Lesión por presión Cuidado de enfermera Terapia de luz de baja intensidad Tecnología de la Información en salud. Pressure injury Nursing care Low-intensity light therapy Health information technology. Lesão por pressão Cuidados de Enfermagem Terapia com luz de baixa intensidade Tecnologia da informação em saúde. |
topic |
Lesión por presión Cuidado de enfermera Terapia de luz de baja intensidad Tecnología de la Información en salud. Pressure injury Nursing care Low-intensity light therapy Health information technology. Lesão por pressão Cuidados de Enfermagem Terapia com luz de baixa intensidade Tecnologia da informação em saúde. |
description |
Objective: To identify information concerning nursing care in the treatment of pressure injuries with low-level laser; To prototype a software with information about nursing care in the treatment of pressure injuries with low-level laser to support professional clinical decision-making. Methodology: Qualitative research, of the methodological study type, through Prototyping. The Operationalization method was used, through cyclic prototyping, carried out through four stages, in the present study developed until the third stage, leaving the fourth stage for future studies. Results: They were divided into the 3 methodological stages in which the study was developed. 1, communication, there was a discussion about the use of low-level laser by nurses in the treatment of wounds, then the existence of technologies with information to treat pressure injuries with laser therapy was observed and mapped. 2, rapid planning, operating system usage was defined, budget planning, graphic scheme, and written content definition. 3, construction of the prototype itself with all the screens proposed in the graphic scheme, budget planning, graphic scheme, and definition of the written content. Conclusion: It is concluded, therefore, that the objectives of the study were covered, and that there is a need to develop more studies like this one, in order to reaffirm the importance of technology and health education, which will have direct effects on care , in teaching and research. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-08-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/32681 10.33448/rsd-v11i10.32681 |
url |
https://rsdjournal.org/index.php/rsd/article/view/32681 |
identifier_str_mv |
10.33448/rsd-v11i10.32681 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/32681/27804 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 11 No. 10; e304111032681 Research, Society and Development; Vol. 11 Núm. 10; e304111032681 Research, Society and Development; v. 11 n. 10; e304111032681 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052813139771392 |