Hardware implementation of type-2 programmable fuzzifier

Detalhes bibliográficos
Autor(a) principal: Rocha Rizol, Paloma M. S. [UNESP]
Data de Publicação: 2011
Outros Autores: Mesquita, Leonardo [UNESP], Saotome, Osamu, Botura Jr., Galdenoro
Tipo de documento: Artigo de conferência
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1109/LASCAS.2011.5750264
http://hdl.handle.net/11449/72433
Resumo: The design of full programmable type-2 membership function circuit is presented in this paper. This circuit is used to implement the fuzzifier block of Type-2 Fuzzy Logic Controller chip. In this paper the type-2 fuzzy set was obtained by blurring the width of the type-1 fuzzy set. This circuit allows programming the height and the shape of the membership function. It operates in current mode, with supply voltage of 3.3V. The simulation results of interval type-2 membership function circuit have been done in CMOS 0.35μm technology using Mentor Graphics software. © 2011 IEEE.
id UNSP_4a84c7f6562c908097bea87502c31dc1
oai_identifier_str oai:repositorio.unesp.br:11449/72433
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Hardware implementation of type-2 programmable fuzzifierInterval type-2 fuzzy logic controllerMembership function circuitType-2 fuzzy logicCurrent modeHardware implementationsInterval type-2 fuzzy logic ControllersM-TechnologiesMentor GraphicsSimulation resultSupply voltagesType-2 fuzzy logic controllersType-2 fuzzy setComputer graphicsFuzzy logicFuzzy setsFuzzy systemsHardwareMembership functionsLogic circuitsThe design of full programmable type-2 membership function circuit is presented in this paper. This circuit is used to implement the fuzzifier block of Type-2 Fuzzy Logic Controller chip. In this paper the type-2 fuzzy set was obtained by blurring the width of the type-1 fuzzy set. This circuit allows programming the height and the shape of the membership function. It operates in current mode, with supply voltage of 3.3V. The simulation results of interval type-2 membership function circuit have been done in CMOS 0.35μm technology using Mentor Graphics software. © 2011 IEEE.UNESP - São Paulo State UniversityITA -Technological Institute of AeronauticsUNESP - São Paulo State UniversityUniversidade Estadual Paulista (Unesp)Instituto Tecnológico de Aeronáutica (ITA)Rocha Rizol, Paloma M. S. [UNESP]Mesquita, Leonardo [UNESP]Saotome, OsamuBotura Jr., Galdenoro2014-05-27T11:25:53Z2014-05-27T11:25:53Z2011-05-20info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/conferenceObjecthttp://dx.doi.org/10.1109/LASCAS.2011.57502642011 IEEE 2nd Latin American Symposium on Circuits and Systems, LASCAS 2011 - Conference Proceedings.http://hdl.handle.net/11449/7243310.1109/LASCAS.2011.57502642-s2.0-799560271019338079447464341Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPeng2011 IEEE 2nd Latin American Symposium on Circuits and Systems, LASCAS 2011 - Conference Proceedingsinfo:eu-repo/semantics/openAccess2024-07-01T20:12:24Zoai:repositorio.unesp.br:11449/72433Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T19:21:30.725262Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Hardware implementation of type-2 programmable fuzzifier
title Hardware implementation of type-2 programmable fuzzifier
spellingShingle Hardware implementation of type-2 programmable fuzzifier
Rocha Rizol, Paloma M. S. [UNESP]
Interval type-2 fuzzy logic controller
Membership function circuit
Type-2 fuzzy logic
Current mode
Hardware implementations
Interval type-2 fuzzy logic Controllers
M-Technologies
Mentor Graphics
Simulation result
Supply voltages
Type-2 fuzzy logic controllers
Type-2 fuzzy set
Computer graphics
Fuzzy logic
Fuzzy sets
Fuzzy systems
Hardware
Membership functions
Logic circuits
title_short Hardware implementation of type-2 programmable fuzzifier
title_full Hardware implementation of type-2 programmable fuzzifier
title_fullStr Hardware implementation of type-2 programmable fuzzifier
title_full_unstemmed Hardware implementation of type-2 programmable fuzzifier
title_sort Hardware implementation of type-2 programmable fuzzifier
author Rocha Rizol, Paloma M. S. [UNESP]
author_facet Rocha Rizol, Paloma M. S. [UNESP]
Mesquita, Leonardo [UNESP]
Saotome, Osamu
Botura Jr., Galdenoro
author_role author
author2 Mesquita, Leonardo [UNESP]
Saotome, Osamu
Botura Jr., Galdenoro
author2_role author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
Instituto Tecnológico de Aeronáutica (ITA)
dc.contributor.author.fl_str_mv Rocha Rizol, Paloma M. S. [UNESP]
Mesquita, Leonardo [UNESP]
Saotome, Osamu
Botura Jr., Galdenoro
dc.subject.por.fl_str_mv Interval type-2 fuzzy logic controller
Membership function circuit
Type-2 fuzzy logic
Current mode
Hardware implementations
Interval type-2 fuzzy logic Controllers
M-Technologies
Mentor Graphics
Simulation result
Supply voltages
Type-2 fuzzy logic controllers
Type-2 fuzzy set
Computer graphics
Fuzzy logic
Fuzzy sets
Fuzzy systems
Hardware
Membership functions
Logic circuits
topic Interval type-2 fuzzy logic controller
Membership function circuit
Type-2 fuzzy logic
Current mode
Hardware implementations
Interval type-2 fuzzy logic Controllers
M-Technologies
Mentor Graphics
Simulation result
Supply voltages
Type-2 fuzzy logic controllers
Type-2 fuzzy set
Computer graphics
Fuzzy logic
Fuzzy sets
Fuzzy systems
Hardware
Membership functions
Logic circuits
description The design of full programmable type-2 membership function circuit is presented in this paper. This circuit is used to implement the fuzzifier block of Type-2 Fuzzy Logic Controller chip. In this paper the type-2 fuzzy set was obtained by blurring the width of the type-1 fuzzy set. This circuit allows programming the height and the shape of the membership function. It operates in current mode, with supply voltage of 3.3V. The simulation results of interval type-2 membership function circuit have been done in CMOS 0.35μm technology using Mentor Graphics software. © 2011 IEEE.
publishDate 2011
dc.date.none.fl_str_mv 2011-05-20
2014-05-27T11:25:53Z
2014-05-27T11:25:53Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/conferenceObject
format conferenceObject
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1109/LASCAS.2011.5750264
2011 IEEE 2nd Latin American Symposium on Circuits and Systems, LASCAS 2011 - Conference Proceedings.
http://hdl.handle.net/11449/72433
10.1109/LASCAS.2011.5750264
2-s2.0-79956027101
9338079447464341
url http://dx.doi.org/10.1109/LASCAS.2011.5750264
http://hdl.handle.net/11449/72433
identifier_str_mv 2011 IEEE 2nd Latin American Symposium on Circuits and Systems, LASCAS 2011 - Conference Proceedings.
10.1109/LASCAS.2011.5750264
2-s2.0-79956027101
9338079447464341
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 2011 IEEE 2nd Latin American Symposium on Circuits and Systems, LASCAS 2011 - Conference Proceedings
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808129057279180800

Registros relacionados