Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio)
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/156635 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-06-12/000900649.pdf |
Resumo: | The obtainment of a durable zirconia/veneer ceramic interface bond is a preoccupation for clinical success of metal-free restorations. However, in the existing evidences indicates that the technique with improved predictability and durability has not yet been determined. To increase the bond strength between the yttria stabilized tetragonal zirconia (Y-TZP) to the veneer ceramic and, consequently, reduce the incidence of shear fractures during the life of the prosthesis, several Y-TZP zirconia surface treatments were proposed prior to the coating process. A new method of surface treatment of zirconia using a plasma enhanced chemical vapor deposition (PECVD) is advancing in the researches in order to obtain better knowledge and results. The aim of the present study was to evaluate the bond strength between the zirconia (without and with surface treatments) to the veneer ceramic after 24 hours of storage in distilled water at room temperature. For this, a total of 60 Y-TZP samples (13×5.4×5 mm) were divided in 6 groups, according the surface treatment: control - no treatment (C), airborne-particle with 27 μm aluminum oxide (Al27), airborne-particle with 110 μm aluminum oxide (Al110), airborne-particle with 250 μm aluminum oxide (Al250), zirconia liner (L) and the film by PECVD (P). The bond strength test between the zirconia and the cover ceramic was performed in a universal test machine (Instron Model 4400 Universal Testing System, Instron Coorporation) using a transverse velocity of 1 mm/min at the zirconia / veneer ceramic interface. The samples were submitted to the bond strength test after 24 hours storage at room temperature. The data were submitted to the test of adherence to the normal curve and submitted to analysis of variance and Tukey HSD test (α = 0.05). The shear strength between Y-TZP and cover... |
id |
UNSP_8f4f8ac0ee90f99f2f8c48b00cc7e5e1 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/156635 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio)ZircônioCerâmicaGases em plasmaResistência ao cisalhamentoZirconiumThe obtainment of a durable zirconia/veneer ceramic interface bond is a preoccupation for clinical success of metal-free restorations. However, in the existing evidences indicates that the technique with improved predictability and durability has not yet been determined. To increase the bond strength between the yttria stabilized tetragonal zirconia (Y-TZP) to the veneer ceramic and, consequently, reduce the incidence of shear fractures during the life of the prosthesis, several Y-TZP zirconia surface treatments were proposed prior to the coating process. A new method of surface treatment of zirconia using a plasma enhanced chemical vapor deposition (PECVD) is advancing in the researches in order to obtain better knowledge and results. The aim of the present study was to evaluate the bond strength between the zirconia (without and with surface treatments) to the veneer ceramic after 24 hours of storage in distilled water at room temperature. For this, a total of 60 Y-TZP samples (13×5.4×5 mm) were divided in 6 groups, according the surface treatment: control - no treatment (C), airborne-particle with 27 μm aluminum oxide (Al27), airborne-particle with 110 μm aluminum oxide (Al110), airborne-particle with 250 μm aluminum oxide (Al250), zirconia liner (L) and the film by PECVD (P). The bond strength test between the zirconia and the cover ceramic was performed in a universal test machine (Instron Model 4400 Universal Testing System, Instron Coorporation) using a transverse velocity of 1 mm/min at the zirconia / veneer ceramic interface. The samples were submitted to the bond strength test after 24 hours storage at room temperature. The data were submitted to the test of adherence to the normal curve and submitted to analysis of variance and Tukey HSD test (α = 0.05). The shear strength between Y-TZP and cover...A obtenção de uma união duradoura da interface zircônia/cerâmica de cobertura é uma preocupação para sucesso clínico de restaurações livres de metal. No entanto, as evidências existentes indicam que a técnica para tratamento da superfície da zircônia com melhor previsibilidade e durabilidade ainda não foi determinada. Para aumentar a força de união entre a zircônia tetragonal policristalina estabilizada por óxido de ítrio (Y-TZP) e o revestimento cerâmico e, consequentemente, reduzir a incidência de fraturas por cisalhamento durante a vida da prótese, foram propostos vários tratamentos da superfície da Y-TZP, antes do processo de revestimento. Um novo método de tratamento de superfície da Y-TZP utilizando a deposição de um filme por vapor químico melhorado por plasma (plasma enhanced chemical vapor deposition - PECVD) está avançando nas pesquisas a fim de obter melhores conhecimentos e resultados. O presente estudo teve por objetivo avaliar a resistência de união entre a zircônia (sem e com tratamentos de superfície) e a cerâmica de cobertura (nano-fluoarpatita), após 24 horas de armazenamento em água destilada à temperatura ambiente. Para isso foram utlizadas 60 amostras de zircônia (13×5,4×5 mm) que foram aleatoriamente dividadas em 6 grupos (n=10), de acordo com o tratamento de superfície: controle/sem tratamento (C), jateamento com partículas de óxido de alumínio de 27 μm (Al₂₇), jateamento com partículas de óxido de alumínio de 110 μm (Al₁₁₀), jateamento com partículas de óxido de alumínio de 250 μm (Al₂₅₀), aplicação de liner para zircônia (L), e o filme por PECVD (P). Após o tratamento de superfície, foi feita a aplicação da cerâmica de cobertura em todas as amostras. O ensaio de resistência de união entre a zircônia e a cerâmica de cobertura foi realizado em uma máquina de ensaio universal...Universidade Estadual Paulista (Unesp)Pesqueira, Aldiéris Alves [UNESP]Universidade Estadual Paulista (Unesp)Camargo, Danielle de Almeida [UNESP]2018-09-19T17:28:06Z2018-09-19T17:28:06Z2017-09-14info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesis24 f.application/pdfCAMARGO, Danielle de Almeida. Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio). 2017. 24 f. Trabalho de conclusão de curso (bacharelado - Odontologia) - Universidade Estadual Paulista Julio de Mesquita Filho, Faculdade de Odontologia de Araçatuba, 2017.http://hdl.handle.net/11449/156635000900649http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-06-12/000900649.pdfAlephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2023-11-24T06:12:06Zoai:repositorio.unesp.br:11449/156635Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T18:34:14.587393Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
title |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
spellingShingle |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) Camargo, Danielle de Almeida [UNESP] Zircônio Cerâmica Gases em plasma Resistência ao cisalhamento Zirconium |
title_short |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
title_full |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
title_fullStr |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
title_full_unstemmed |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
title_sort |
Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio) |
author |
Camargo, Danielle de Almeida [UNESP] |
author_facet |
Camargo, Danielle de Almeida [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Pesqueira, Aldiéris Alves [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Camargo, Danielle de Almeida [UNESP] |
dc.subject.por.fl_str_mv |
Zircônio Cerâmica Gases em plasma Resistência ao cisalhamento Zirconium |
topic |
Zircônio Cerâmica Gases em plasma Resistência ao cisalhamento Zirconium |
description |
The obtainment of a durable zirconia/veneer ceramic interface bond is a preoccupation for clinical success of metal-free restorations. However, in the existing evidences indicates that the technique with improved predictability and durability has not yet been determined. To increase the bond strength between the yttria stabilized tetragonal zirconia (Y-TZP) to the veneer ceramic and, consequently, reduce the incidence of shear fractures during the life of the prosthesis, several Y-TZP zirconia surface treatments were proposed prior to the coating process. A new method of surface treatment of zirconia using a plasma enhanced chemical vapor deposition (PECVD) is advancing in the researches in order to obtain better knowledge and results. The aim of the present study was to evaluate the bond strength between the zirconia (without and with surface treatments) to the veneer ceramic after 24 hours of storage in distilled water at room temperature. For this, a total of 60 Y-TZP samples (13×5.4×5 mm) were divided in 6 groups, according the surface treatment: control - no treatment (C), airborne-particle with 27 μm aluminum oxide (Al27), airborne-particle with 110 μm aluminum oxide (Al110), airborne-particle with 250 μm aluminum oxide (Al250), zirconia liner (L) and the film by PECVD (P). The bond strength test between the zirconia and the cover ceramic was performed in a universal test machine (Instron Model 4400 Universal Testing System, Instron Coorporation) using a transverse velocity of 1 mm/min at the zirconia / veneer ceramic interface. The samples were submitted to the bond strength test after 24 hours storage at room temperature. The data were submitted to the test of adherence to the normal curve and submitted to analysis of variance and Tukey HSD test (α = 0.05). The shear strength between Y-TZP and cover... |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-09-14 2018-09-19T17:28:06Z 2018-09-19T17:28:06Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
CAMARGO, Danielle de Almeida. Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio). 2017. 24 f. Trabalho de conclusão de curso (bacharelado - Odontologia) - Universidade Estadual Paulista Julio de Mesquita Filho, Faculdade de Odontologia de Araçatuba, 2017. http://hdl.handle.net/11449/156635 000900649 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-06-12/000900649.pdf |
identifier_str_mv |
CAMARGO, Danielle de Almeida. Resistência de união entre zircônia (Y-TZP) e cerâmica de cobertura após diferentes tratamentos de superfície (plasma de baixa temperatura (experimental), liner e jateamento com diferentes granulações de óxidos de alumínio). 2017. 24 f. Trabalho de conclusão de curso (bacharelado - Odontologia) - Universidade Estadual Paulista Julio de Mesquita Filho, Faculdade de Odontologia de Araçatuba, 2017. 000900649 |
url |
http://hdl.handle.net/11449/156635 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-06-12/000900649.pdf |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
24 f. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808128950326525952 |