Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives

Detalhes bibliográficos
Autor(a) principal: Mercante, Luiza A.
Data de Publicação: 2021
Outros Autores: Andre, Rafaela S., Facure, Murilo H.M., Fugikawa-Santos, Lucas [UNESP], Correa, Daniel S.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1016/j.snr.2021.100050
http://hdl.handle.net/11449/223245
Resumo: Monitoring glucose levels is critical for diabetes management and might be a key step in the development of individualized treatment strategies. In this scenario, tracking salivary glucose has been recognized as a promising strategy due to its merits of ease sampling and non-invasive nature. In this paper, we report on the development of an electrical impedance-based biosensor array to distinguish glucose at different concentrations in saliva. The enzymatic biosensors were made of gold interdigitated electrodes coated with pristine electrospun zinc oxide nanofibers (NFZ) and NFZ combined with graphene-based nanomaterials (i.e., reduced graphene oxide - rGO and graphene quantum dots - GQDs), on which a layer of glucose oxidase (GOx) enzyme was adsorbed. Electrical impedance measurements indicate that the NFZ-GQDs@GOx and NFZ-rGO@GOx platforms presented good linear relationship with glucose concentration in the range of 0.1 to 6 mM. The highest sensitivity was reached for NFZ-rGO@GOx with a detection limit (LOD) of 14 μM, while the LOD was 32 μM for NFZ-GQDs@GOx. Both biosensors were also capable of detecting glucose in artificial saliva using aliquots of 10 μL, with recovery between 87.3 and 106.8%. Furthermore, the three sensing units (NFZ@GOx, NFZ-rGO@GOx and NFZ-GQDs@GOx) were employed to build a bioelectronic tongue. Using Principal Component Analysis (PCA) technique to project the electrical impedance data of all sensing units allowed the discrimination of the different glucose concentrations and interferents. This study reveals the applicability of the developed bioelectronic tongue as non-invasive glucose sensors, which approach could also be pottentially adapted to detect other disease biomarkers present in saliva.
id UNSP_91418cb4f1459b782269dee69b3c7a4b
oai_identifier_str oai:repositorio.unesp.br:11449/223245
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivativesBiosensor arrayElectrospinningElectrospun nanofibersGlucose detectionGraphene quantum dotsReduced graphene oxideMonitoring glucose levels is critical for diabetes management and might be a key step in the development of individualized treatment strategies. In this scenario, tracking salivary glucose has been recognized as a promising strategy due to its merits of ease sampling and non-invasive nature. In this paper, we report on the development of an electrical impedance-based biosensor array to distinguish glucose at different concentrations in saliva. The enzymatic biosensors were made of gold interdigitated electrodes coated with pristine electrospun zinc oxide nanofibers (NFZ) and NFZ combined with graphene-based nanomaterials (i.e., reduced graphene oxide - rGO and graphene quantum dots - GQDs), on which a layer of glucose oxidase (GOx) enzyme was adsorbed. Electrical impedance measurements indicate that the NFZ-GQDs@GOx and NFZ-rGO@GOx platforms presented good linear relationship with glucose concentration in the range of 0.1 to 6 mM. The highest sensitivity was reached for NFZ-rGO@GOx with a detection limit (LOD) of 14 μM, while the LOD was 32 μM for NFZ-GQDs@GOx. Both biosensors were also capable of detecting glucose in artificial saliva using aliquots of 10 μL, with recovery between 87.3 and 106.8%. Furthermore, the three sensing units (NFZ@GOx, NFZ-rGO@GOx and NFZ-GQDs@GOx) were employed to build a bioelectronic tongue. Using Principal Component Analysis (PCA) technique to project the electrical impedance data of all sensing units allowed the discrimination of the different glucose concentrations and interferents. This study reveals the applicability of the developed bioelectronic tongue as non-invasive glucose sensors, which approach could also be pottentially adapted to detect other disease biomarkers present in saliva.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Institute of Chemistry Federal University of Bahia (UFBA), BANanotechnology National Laboratory for Agriculture (LNNA) Embrapa Instrumentação, SPPPGQ Department of Chemistry Center for Exact Sciences and Technology Federal University of São Carlos (UFSCar), SPPhysics Department Institute of Geosciences and Exact Sciences São Paulo State University (UNESP), SPPhysics Department Institute of Geosciences and Exact Sciences São Paulo State University (UNESP), SPFAPESP: 2016/23793-4FAPESP: 2017/10582-8FAPESP: 2017/12174-4FAPESP: 2018/22214-6Universidade Federal da Bahia (UFBA)Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)Universidade Federal de São Carlos (UFSCar)Universidade Estadual Paulista (UNESP)Mercante, Luiza A.Andre, Rafaela S.Facure, Murilo H.M.Fugikawa-Santos, Lucas [UNESP]Correa, Daniel S.2022-04-28T19:49:32Z2022-04-28T19:49:32Z2021-11-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://dx.doi.org/10.1016/j.snr.2021.100050Sensors and Actuators Reports, v. 3.2666-0539http://hdl.handle.net/11449/22324510.1016/j.snr.2021.1000502-s2.0-85122759884Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengSensors and Actuators Reportsinfo:eu-repo/semantics/openAccess2022-04-28T19:49:32Zoai:repositorio.unesp.br:11449/223245Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T17:10:53.830615Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
title Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
spellingShingle Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
Mercante, Luiza A.
Biosensor array
Electrospinning
Electrospun nanofibers
Glucose detection
Graphene quantum dots
Reduced graphene oxide
title_short Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
title_full Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
title_fullStr Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
title_full_unstemmed Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
title_sort Design of a bioelectronic tongue for glucose monitoring using zinc oxide nanofibers and graphene derivatives
author Mercante, Luiza A.
author_facet Mercante, Luiza A.
Andre, Rafaela S.
Facure, Murilo H.M.
Fugikawa-Santos, Lucas [UNESP]
Correa, Daniel S.
author_role author
author2 Andre, Rafaela S.
Facure, Murilo H.M.
Fugikawa-Santos, Lucas [UNESP]
Correa, Daniel S.
author2_role author
author
author
author
dc.contributor.none.fl_str_mv Universidade Federal da Bahia (UFBA)
Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)
Universidade Federal de São Carlos (UFSCar)
Universidade Estadual Paulista (UNESP)
dc.contributor.author.fl_str_mv Mercante, Luiza A.
Andre, Rafaela S.
Facure, Murilo H.M.
Fugikawa-Santos, Lucas [UNESP]
Correa, Daniel S.
dc.subject.por.fl_str_mv Biosensor array
Electrospinning
Electrospun nanofibers
Glucose detection
Graphene quantum dots
Reduced graphene oxide
topic Biosensor array
Electrospinning
Electrospun nanofibers
Glucose detection
Graphene quantum dots
Reduced graphene oxide
description Monitoring glucose levels is critical for diabetes management and might be a key step in the development of individualized treatment strategies. In this scenario, tracking salivary glucose has been recognized as a promising strategy due to its merits of ease sampling and non-invasive nature. In this paper, we report on the development of an electrical impedance-based biosensor array to distinguish glucose at different concentrations in saliva. The enzymatic biosensors were made of gold interdigitated electrodes coated with pristine electrospun zinc oxide nanofibers (NFZ) and NFZ combined with graphene-based nanomaterials (i.e., reduced graphene oxide - rGO and graphene quantum dots - GQDs), on which a layer of glucose oxidase (GOx) enzyme was adsorbed. Electrical impedance measurements indicate that the NFZ-GQDs@GOx and NFZ-rGO@GOx platforms presented good linear relationship with glucose concentration in the range of 0.1 to 6 mM. The highest sensitivity was reached for NFZ-rGO@GOx with a detection limit (LOD) of 14 μM, while the LOD was 32 μM for NFZ-GQDs@GOx. Both biosensors were also capable of detecting glucose in artificial saliva using aliquots of 10 μL, with recovery between 87.3 and 106.8%. Furthermore, the three sensing units (NFZ@GOx, NFZ-rGO@GOx and NFZ-GQDs@GOx) were employed to build a bioelectronic tongue. Using Principal Component Analysis (PCA) technique to project the electrical impedance data of all sensing units allowed the discrimination of the different glucose concentrations and interferents. This study reveals the applicability of the developed bioelectronic tongue as non-invasive glucose sensors, which approach could also be pottentially adapted to detect other disease biomarkers present in saliva.
publishDate 2021
dc.date.none.fl_str_mv 2021-11-01
2022-04-28T19:49:32Z
2022-04-28T19:49:32Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1016/j.snr.2021.100050
Sensors and Actuators Reports, v. 3.
2666-0539
http://hdl.handle.net/11449/223245
10.1016/j.snr.2021.100050
2-s2.0-85122759884
url http://dx.doi.org/10.1016/j.snr.2021.100050
http://hdl.handle.net/11449/223245
identifier_str_mv Sensors and Actuators Reports, v. 3.
2666-0539
10.1016/j.snr.2021.100050
2-s2.0-85122759884
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Sensors and Actuators Reports
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808128767078432768