Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode

Detalhes bibliográficos
Autor(a) principal: De Oliveira, Marcelo F. [UNESP]
Data de Publicação: 2003
Outros Autores: Saczk, Adelir A. [UNESP], Gomes Neto, José Anchieta [UNESP], Roldan, Paulo S. [UNESP], Stradiotto, Nelson Ramos [UNESP]
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.3390/s30900371
http://hdl.handle.net/11449/67525
Resumo: A flow-injection system with a glassy carbon disk electrode modified with Prussian Blue film is proposed for the determination of persulfate in commercial samples of hair bleaching boosters by amperometry. The detection was obtained by chronoamperometric technique and the sample is injected into the electrochemical cell in a wall jet configuration. Potassium chloride at concentration of 0.1 mol L-1 acted as sample carrier at a flow rate of 4.0 mL min-1 and supporting-electrolyte. For 0.025 V (vs. Ag/AgCl) applied voltage, the proposed system handles ca. 160 samples per hour (1.0 10-4 - 1.0 10-3 mol L-1 of persulfate), consuming about 200 μL sample and 11 mg KCl per determination. Typical linear correlations between electrocatalytic current and persulfate concentration was ca. 0.9998. The detection limit is 9.0 10-5 mol L-1 and the calculated amperometric sensibility 3.6 103 μA L mol -1. Relative standard deviation (n =12) of a 1.0 10-4 mol L-1 sample is about 2.2%. The method was applied to persulfate determination in commercial hair-bleaching samples and results are in agreement with those obtained by titrimetry at 95% confidence level and good recoveries (95 - 112%) of spiked samples were found. © 2003 by MDPI.
id UNSP_9988296c05071d01e68087d87e64a584
oai_identifier_str oai:repositorio.unesp.br:11449/67525
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrodeAmperometryFlow injection analysisPersulfatePrussian Blue film-modified electrodeElectrocatalytic effectsPrussian blue film-modified electrodeCatalysisConcentration (process)DepositionElectrochemistryGraphitePotassium compoundsReaction kineticsVolumetric analysisElectrodesA flow-injection system with a glassy carbon disk electrode modified with Prussian Blue film is proposed for the determination of persulfate in commercial samples of hair bleaching boosters by amperometry. The detection was obtained by chronoamperometric technique and the sample is injected into the electrochemical cell in a wall jet configuration. Potassium chloride at concentration of 0.1 mol L-1 acted as sample carrier at a flow rate of 4.0 mL min-1 and supporting-electrolyte. For 0.025 V (vs. Ag/AgCl) applied voltage, the proposed system handles ca. 160 samples per hour (1.0 10-4 - 1.0 10-3 mol L-1 of persulfate), consuming about 200 μL sample and 11 mg KCl per determination. Typical linear correlations between electrocatalytic current and persulfate concentration was ca. 0.9998. The detection limit is 9.0 10-5 mol L-1 and the calculated amperometric sensibility 3.6 103 μA L mol -1. Relative standard deviation (n =12) of a 1.0 10-4 mol L-1 sample is about 2.2%. The method was applied to persulfate determination in commercial hair-bleaching samples and results are in agreement with those obtained by titrimetry at 95% confidence level and good recoveries (95 - 112%) of spiked samples were found. © 2003 by MDPI.Departameno de Quimica Analitica Universidade Estadual Paulista, PO Box 355, 14800-900, Araraquara-SPDepartameno de Quimica Analitica Universidade Estadual Paulista, PO Box 355, 14800-900, Araraquara-SPUniversidade Estadual Paulista (Unesp)De Oliveira, Marcelo F. [UNESP]Saczk, Adelir A. [UNESP]Gomes Neto, José Anchieta [UNESP]Roldan, Paulo S. [UNESP]Stradiotto, Nelson Ramos [UNESP]2014-05-27T11:20:58Z2014-05-27T11:20:58Z2003-12-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article371-380application/pdfhttp://dx.doi.org/10.3390/s30900371Sensors, v. 3, n. 9, p. 371-380, 2003.1424-3210http://hdl.handle.net/11449/6752510.3390/s30900371WOS:0001856237000052-s2.0-184443817602-s2.0-18444381760.pdf87087356998465780072173018005712Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengSensors0,584info:eu-repo/semantics/openAccess2024-01-28T06:47:31Zoai:repositorio.unesp.br:11449/67525Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-01-28T06:47:31Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
title Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
spellingShingle Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
De Oliveira, Marcelo F. [UNESP]
Amperometry
Flow injection analysis
Persulfate
Prussian Blue film-modified electrode
Electrocatalytic effects
Prussian blue film-modified electrode
Catalysis
Concentration (process)
Deposition
Electrochemistry
Graphite
Potassium compounds
Reaction kinetics
Volumetric analysis
Electrodes
title_short Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
title_full Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
title_fullStr Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
title_full_unstemmed Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
title_sort Flow injection amperometric determination of persulfate in cosmetic products using a Prussian Blue film-modified electrode
author De Oliveira, Marcelo F. [UNESP]
author_facet De Oliveira, Marcelo F. [UNESP]
Saczk, Adelir A. [UNESP]
Gomes Neto, José Anchieta [UNESP]
Roldan, Paulo S. [UNESP]
Stradiotto, Nelson Ramos [UNESP]
author_role author
author2 Saczk, Adelir A. [UNESP]
Gomes Neto, José Anchieta [UNESP]
Roldan, Paulo S. [UNESP]
Stradiotto, Nelson Ramos [UNESP]
author2_role author
author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
dc.contributor.author.fl_str_mv De Oliveira, Marcelo F. [UNESP]
Saczk, Adelir A. [UNESP]
Gomes Neto, José Anchieta [UNESP]
Roldan, Paulo S. [UNESP]
Stradiotto, Nelson Ramos [UNESP]
dc.subject.por.fl_str_mv Amperometry
Flow injection analysis
Persulfate
Prussian Blue film-modified electrode
Electrocatalytic effects
Prussian blue film-modified electrode
Catalysis
Concentration (process)
Deposition
Electrochemistry
Graphite
Potassium compounds
Reaction kinetics
Volumetric analysis
Electrodes
topic Amperometry
Flow injection analysis
Persulfate
Prussian Blue film-modified electrode
Electrocatalytic effects
Prussian blue film-modified electrode
Catalysis
Concentration (process)
Deposition
Electrochemistry
Graphite
Potassium compounds
Reaction kinetics
Volumetric analysis
Electrodes
description A flow-injection system with a glassy carbon disk electrode modified with Prussian Blue film is proposed for the determination of persulfate in commercial samples of hair bleaching boosters by amperometry. The detection was obtained by chronoamperometric technique and the sample is injected into the electrochemical cell in a wall jet configuration. Potassium chloride at concentration of 0.1 mol L-1 acted as sample carrier at a flow rate of 4.0 mL min-1 and supporting-electrolyte. For 0.025 V (vs. Ag/AgCl) applied voltage, the proposed system handles ca. 160 samples per hour (1.0 10-4 - 1.0 10-3 mol L-1 of persulfate), consuming about 200 μL sample and 11 mg KCl per determination. Typical linear correlations between electrocatalytic current and persulfate concentration was ca. 0.9998. The detection limit is 9.0 10-5 mol L-1 and the calculated amperometric sensibility 3.6 103 μA L mol -1. Relative standard deviation (n =12) of a 1.0 10-4 mol L-1 sample is about 2.2%. The method was applied to persulfate determination in commercial hair-bleaching samples and results are in agreement with those obtained by titrimetry at 95% confidence level and good recoveries (95 - 112%) of spiked samples were found. © 2003 by MDPI.
publishDate 2003
dc.date.none.fl_str_mv 2003-12-01
2014-05-27T11:20:58Z
2014-05-27T11:20:58Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.3390/s30900371
Sensors, v. 3, n. 9, p. 371-380, 2003.
1424-3210
http://hdl.handle.net/11449/67525
10.3390/s30900371
WOS:000185623700005
2-s2.0-18444381760
2-s2.0-18444381760.pdf
8708735699846578
0072173018005712
url http://dx.doi.org/10.3390/s30900371
http://hdl.handle.net/11449/67525
identifier_str_mv Sensors, v. 3, n. 9, p. 371-380, 2003.
1424-3210
10.3390/s30900371
WOS:000185623700005
2-s2.0-18444381760
2-s2.0-18444381760.pdf
8708735699846578
0072173018005712
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Sensors
0,584
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 371-380
application/pdf
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1803047485665443840