Técnica alternativa de conformação de junção a partir de tubos metálicos
Autor(a) principal: | |
---|---|
Data de Publicação: | 2003 |
Outros Autores: | , |
Tipo de documento: | Artigo de conferência |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/67559 |
Resumo: | This work presents a technique for the cold forming of thin-walled cylindrical tubes, aimed at obtaining a symmetrical joint with an unconventional forming technique, using elastomer rod. The purpose of this work is to investigate the influence of the anisotropy on the total forming force, through the use of elastomer for obtaining T-junctions, in order to get a better result between experimental values and the analytical solution. For total forming force forecasting, it will be used the upper-bound theory and for a better understanding on the anisotropy behavior of the material, it will be employed the quadratic yielding criterion proposed by Hill. The employed materials for such investigation were Aluminum, Brass and Copper. |
id |
UNSP_a00c728d7e7f8e32f865443c036d3ae1 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/67559 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Técnica alternativa de conformação de junção a partir de tubos metálicosAlternative technique of forming of junction on metal tubesAnisotropyElastomer rodFormingElastomer rodsJunctionsElastomersTubes (components)Metal formingThis work presents a technique for the cold forming of thin-walled cylindrical tubes, aimed at obtaining a symmetrical joint with an unconventional forming technique, using elastomer rod. The purpose of this work is to investigate the influence of the anisotropy on the total forming force, through the use of elastomer for obtaining T-junctions, in order to get a better result between experimental values and the analytical solution. For total forming force forecasting, it will be used the upper-bound theory and for a better understanding on the anisotropy behavior of the material, it will be employed the quadratic yielding criterion proposed by Hill. The employed materials for such investigation were Aluminum, Brass and Copper.Inst. Tecn. de Aeronautica CTAUniversidade Estadual Paulista, Ilha SolteiraUniversidade Estadual Paulista, Ilha SolteiraCTAUniversidade Estadual Paulista (Unesp)Foli, Cristiano Roberto MartinsMenezes, Miguel ÂngeldMoreira Filho, Lindolfo Araújo [UNESP]2014-05-27T11:20:59Z2014-05-27T11:20:59Z2003-12-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/conferenceObject1007-101658th Congresso Anual da ABM (ASSociacao Brasileira de Metalurgia e Materiais), p. 1007-1016.http://hdl.handle.net/11449/675592-s2.0-18425782194346416996753115Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPpor58th Congresso Anual da ABM (ASSociacao Brasileira de Metalurgia e Materiais)info:eu-repo/semantics/openAccess2021-10-23T21:41:35Zoai:repositorio.unesp.br:11449/67559Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462021-10-23T21:41:35Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Técnica alternativa de conformação de junção a partir de tubos metálicos Alternative technique of forming of junction on metal tubes |
title |
Técnica alternativa de conformação de junção a partir de tubos metálicos |
spellingShingle |
Técnica alternativa de conformação de junção a partir de tubos metálicos Foli, Cristiano Roberto Martins Anisotropy Elastomer rod Forming Elastomer rods Junctions Elastomers Tubes (components) Metal forming |
title_short |
Técnica alternativa de conformação de junção a partir de tubos metálicos |
title_full |
Técnica alternativa de conformação de junção a partir de tubos metálicos |
title_fullStr |
Técnica alternativa de conformação de junção a partir de tubos metálicos |
title_full_unstemmed |
Técnica alternativa de conformação de junção a partir de tubos metálicos |
title_sort |
Técnica alternativa de conformação de junção a partir de tubos metálicos |
author |
Foli, Cristiano Roberto Martins |
author_facet |
Foli, Cristiano Roberto Martins Menezes, Miguel Ângeld Moreira Filho, Lindolfo Araújo [UNESP] |
author_role |
author |
author2 |
Menezes, Miguel Ângeld Moreira Filho, Lindolfo Araújo [UNESP] |
author2_role |
author author |
dc.contributor.none.fl_str_mv |
CTA Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Foli, Cristiano Roberto Martins Menezes, Miguel Ângeld Moreira Filho, Lindolfo Araújo [UNESP] |
dc.subject.por.fl_str_mv |
Anisotropy Elastomer rod Forming Elastomer rods Junctions Elastomers Tubes (components) Metal forming |
topic |
Anisotropy Elastomer rod Forming Elastomer rods Junctions Elastomers Tubes (components) Metal forming |
description |
This work presents a technique for the cold forming of thin-walled cylindrical tubes, aimed at obtaining a symmetrical joint with an unconventional forming technique, using elastomer rod. The purpose of this work is to investigate the influence of the anisotropy on the total forming force, through the use of elastomer for obtaining T-junctions, in order to get a better result between experimental values and the analytical solution. For total forming force forecasting, it will be used the upper-bound theory and for a better understanding on the anisotropy behavior of the material, it will be employed the quadratic yielding criterion proposed by Hill. The employed materials for such investigation were Aluminum, Brass and Copper. |
publishDate |
2003 |
dc.date.none.fl_str_mv |
2003-12-01 2014-05-27T11:20:59Z 2014-05-27T11:20:59Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/conferenceObject |
format |
conferenceObject |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
58th Congresso Anual da ABM (ASSociacao Brasileira de Metalurgia e Materiais), p. 1007-1016. http://hdl.handle.net/11449/67559 2-s2.0-1842578219 4346416996753115 |
identifier_str_mv |
58th Congresso Anual da ABM (ASSociacao Brasileira de Metalurgia e Materiais), p. 1007-1016. 2-s2.0-1842578219 4346416996753115 |
url |
http://hdl.handle.net/11449/67559 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
58th Congresso Anual da ABM (ASSociacao Brasileira de Metalurgia e Materiais) |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
1007-1016 |
dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1803047235245572096 |