The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA

Detalhes bibliográficos
Autor(a) principal: Ausiello, P.
Data de Publicação: 2020
Outros Autores: Ciaramella, S., De Benedictis, A., Lanzotti, A., Tribst, J. P.M. [UNESP], Watts, D. C.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1080/10255842.2020.1836168
http://hdl.handle.net/11449/205371
Resumo: 3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel–restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities.
id UNSP_aa31dff0e85aff22d15b4eb794402533
oai_identifier_str oai:repositorio.unesp.br:11449/205371
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEAAdhesionclass II MOloadingoperative dentistrypolymerization shrinkage3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel–restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities.Department of Neurosciences Reproductive and Odontostomatological Sciences University of Naples Federico IIDepartment of Industrial Engineering Fraunhofer JL IDEAS–University of Naples Federico IIDepartment of Dental Materials and Prosthodontics São Paulo State University (Unesp) Institute of Science and TechnologySchool of Medical Sciences and Photon Science Institute University of ManchesterDepartment of Dental Materials and Prosthodontics São Paulo State University (Unesp) Institute of Science and TechnologyUniversity of Naples Federico IIFraunhofer JL IDEAS–University of Naples Federico IIUniversidade Estadual Paulista (Unesp)University of ManchesterAusiello, P.Ciaramella, S.De Benedictis, A.Lanzotti, A.Tribst, J. P.M. [UNESP]Watts, D. C.2021-06-25T10:14:13Z2021-06-25T10:14:13Z2020-01-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://dx.doi.org/10.1080/10255842.2020.1836168Computer Methods in Biomechanics and Biomedical Engineering.1476-82591025-5842http://hdl.handle.net/11449/20537110.1080/10255842.2020.18361682-s2.0-85093914986Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengComputer Methods in Biomechanics and Biomedical Engineeringinfo:eu-repo/semantics/openAccess2021-10-23T12:39:46Zoai:repositorio.unesp.br:11449/205371Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T19:31:37.438869Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
title The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
spellingShingle The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
Ausiello, P.
Adhesion
class II MO
loading
operative dentistry
polymerization shrinkage
title_short The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
title_full The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
title_fullStr The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
title_full_unstemmed The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
title_sort The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA
author Ausiello, P.
author_facet Ausiello, P.
Ciaramella, S.
De Benedictis, A.
Lanzotti, A.
Tribst, J. P.M. [UNESP]
Watts, D. C.
author_role author
author2 Ciaramella, S.
De Benedictis, A.
Lanzotti, A.
Tribst, J. P.M. [UNESP]
Watts, D. C.
author2_role author
author
author
author
author
dc.contributor.none.fl_str_mv University of Naples Federico II
Fraunhofer JL IDEAS–University of Naples Federico II
Universidade Estadual Paulista (Unesp)
University of Manchester
dc.contributor.author.fl_str_mv Ausiello, P.
Ciaramella, S.
De Benedictis, A.
Lanzotti, A.
Tribst, J. P.M. [UNESP]
Watts, D. C.
dc.subject.por.fl_str_mv Adhesion
class II MO
loading
operative dentistry
polymerization shrinkage
topic Adhesion
class II MO
loading
operative dentistry
polymerization shrinkage
description 3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel–restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities.
publishDate 2020
dc.date.none.fl_str_mv 2020-01-01
2021-06-25T10:14:13Z
2021-06-25T10:14:13Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1080/10255842.2020.1836168
Computer Methods in Biomechanics and Biomedical Engineering.
1476-8259
1025-5842
http://hdl.handle.net/11449/205371
10.1080/10255842.2020.1836168
2-s2.0-85093914986
url http://dx.doi.org/10.1080/10255842.2020.1836168
http://hdl.handle.net/11449/205371
identifier_str_mv Computer Methods in Biomechanics and Biomedical Engineering.
1476-8259
1025-5842
10.1080/10255842.2020.1836168
2-s2.0-85093914986
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Computer Methods in Biomechanics and Biomedical Engineering
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808129081339805696

Registros relacionados