Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/123286 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/10-04-2015/000822600.pdf |
Resumo: | It was proposed to evaluate the load of fracture of a ceramic restoration-based lithium disilicate (IPS e.max CAD) submitted to different protocols cementation. 70 bases were made of a resin material similar to dentin (NEMA grade G10) to provide standardized preparations, machined to simulate a tooth prepared for full crown (ending Bevel with walls of 6 degrees of convergence) and the anatomy of the root. The root portion was covered with polyurethane poliétere included. Seventy ceramic crowns were fabricated by CAD / CAM system. After evaluating the film thickness of cement (cement analogue technique) crowns were cleaned with distilled water in ultra-som (5 min). Subsequently, the crowns were subjected to different protocols cementation: FZ-zinc phosphate cement; IVMR-ionomer resin modified glass; RDCS-hydrofluoric acid 5% (20 s) + silane (1 min) + dual resin cement , RDCST-hydrofluoric acid 5% (20 s) + silane (1 min) + heat treatment furnace 100 °C (2 min) + dual resin cement; RDS-silane (1min) + dual resin cement; RDST silane (1 min) + heat treatment furnace 100 °C (2 min) + dual resin cement; RAACS-hydrofluoric acid 5% (20 s) + silane (1 min) + self-adhesive resin cement. All samples were subjected to thermomechanical cycling (2,000,000 cycles - 100N, 4 Hz, 5 ºC - 55 ºC, dwell time 60 s), with a stainless steel piston (Ø = 4 mm) in the center of the occlusal surface. The fracture toughness test was performed in a universal testing machine (v = 1 mm/min at 37 ° C in distilled water). Data fracture resistance (N) were subjected to ANOVA (one factor) and Tukey's test with α = 0.05. We conducted a finite element analysis to check the distribution of the stresses on the crown. Through scanning electron microscopy were performed on two samples from each group, representative photomicrographs of surface treatment . For fractographic analysis, we used the stereo type of fracture... |
id |
UNSP_b705401cf73170d880c2a10bf56ad44d |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/123286 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítioCerâmicas odontológicasMateriais dentáriosResistencia de materiaisDental ceramicsIt was proposed to evaluate the load of fracture of a ceramic restoration-based lithium disilicate (IPS e.max CAD) submitted to different protocols cementation. 70 bases were made of a resin material similar to dentin (NEMA grade G10) to provide standardized preparations, machined to simulate a tooth prepared for full crown (ending Bevel with walls of 6 degrees of convergence) and the anatomy of the root. The root portion was covered with polyurethane poliétere included. Seventy ceramic crowns were fabricated by CAD / CAM system. After evaluating the film thickness of cement (cement analogue technique) crowns were cleaned with distilled water in ultra-som (5 min). Subsequently, the crowns were subjected to different protocols cementation: FZ-zinc phosphate cement; IVMR-ionomer resin modified glass; RDCS-hydrofluoric acid 5% (20 s) + silane (1 min) + dual resin cement , RDCST-hydrofluoric acid 5% (20 s) + silane (1 min) + heat treatment furnace 100 °C (2 min) + dual resin cement; RDS-silane (1min) + dual resin cement; RDST silane (1 min) + heat treatment furnace 100 °C (2 min) + dual resin cement; RAACS-hydrofluoric acid 5% (20 s) + silane (1 min) + self-adhesive resin cement. All samples were subjected to thermomechanical cycling (2,000,000 cycles - 100N, 4 Hz, 5 ºC - 55 ºC, dwell time 60 s), with a stainless steel piston (Ø = 4 mm) in the center of the occlusal surface. The fracture toughness test was performed in a universal testing machine (v = 1 mm/min at 37 ° C in distilled water). Data fracture resistance (N) were subjected to ANOVA (one factor) and Tukey's test with α = 0.05. We conducted a finite element analysis to check the distribution of the stresses on the crown. Through scanning electron microscopy were performed on two samples from each group, representative photomicrographs of surface treatment . For fractographic analysis, we used the stereo type of fracture...Foi proposto avaliar a carga de fratura de restauração cerâmica à base de dissilicato de lítio (IPS e.max CAD) submetida a diferentes protocolos de cimentação. Foram confeccionadas 70 bases de um material resinoso análogo à dentina (NEMA grade G10) simulando de maneira padronizada dentes preparados para coroa total (término em chanfro com paredes de 6 graus de convergência) e a anatomia da raiz. A porção radicular foi coberta com poliéter e incluída em poliuretano. Setenta coroas cerâmicas foram fabricadas pelo sistema CAD/CAM. Depois de avaliar a espessura do filme de cimento (técnica do cimento análogo) as coroas foram limpas em ultra-som com água destilada (5 min). Posteriormente, as coroas foram submetidas a diferentes protocolos de cimentação: FZ-cimento de fosfato de zinco; IVMR-cimento de ionômero de vidro modificado por resina; RDCS-ácido fluorídrico 5 % (20 s) + silano (1 min) + cimento resinoso dual; RDCST-ácido fluorídrico 5% (20 s) + silano (1 min) + tratamento térmico forno 100 °C (2 min) + cimento resinoso dual; RDS-silano (1 min) + cimento resinoso dual; RDST-silano (1 min) + tratamento térmico forno 100 °C (2 min) + cimento resinoso dual; RAACS-ácido fluorídrico 5% (20 s) + silano (1 min) + cimento resinoso auto-adesivo. Todas as amostras foram submetidas à ciclagem termomecânica (2.000.000 ciclos - 100 N, 4 Hz, 5 ºC - 55 ºC, tempo de permanência 60 s), com um pistão de aço inoxidável (Ø=4mm) no centro da superfície oclusal. O teste da carga de fratura foi realizado em uma máquina de ensaios universal (v = 1 mm/min à 37 °C em água destilada). Os dados de carga de fratura (N) foram submetidos aos testes ANOVA (um fator) e Tukey, com α = 0,05. Realizou-se a análise de elementos finitos para verificação da distribuição das tensões na coroa. Por meio do microscópio eletrônico de varredura foram realizadas, em duas amostra de cada...Universidade Estadual Paulista (Unesp)Kimpara, Estevão Tomomitsu [UNESP]Paes-Junior Júnior, Tarcisio José de Arruda [UNESP]Universidade Estadual Paulista (Unesp)Carvalho, Rodrigo Furtado de [UNESP]2015-05-14T16:53:17Z2015-05-14T16:53:17Z2014-05-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesis124 f.: il.application/pdfCARVALHO, Rodrigo Furtado de. Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio. 2014. 124 f. Tese (Doutorado) - Universidade Estadual Paulista Júlio de Mesquita Filho Instituto de Ciência e Tecnologia, 2014.http://hdl.handle.net/11449/123286000822600http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/10-04-2015/000822600.pdf33004145070P809679163886657540000-0003-0586-4644Alephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2023-10-31T06:10:47Zoai:repositorio.unesp.br:11449/123286Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T16:32:03.127393Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
title |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
spellingShingle |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio Carvalho, Rodrigo Furtado de [UNESP] Cerâmicas odontológicas Materiais dentários Resistencia de materiais Dental ceramics |
title_short |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
title_full |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
title_fullStr |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
title_full_unstemmed |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
title_sort |
Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio |
author |
Carvalho, Rodrigo Furtado de [UNESP] |
author_facet |
Carvalho, Rodrigo Furtado de [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Kimpara, Estevão Tomomitsu [UNESP] Paes-Junior Júnior, Tarcisio José de Arruda [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Carvalho, Rodrigo Furtado de [UNESP] |
dc.subject.por.fl_str_mv |
Cerâmicas odontológicas Materiais dentários Resistencia de materiais Dental ceramics |
topic |
Cerâmicas odontológicas Materiais dentários Resistencia de materiais Dental ceramics |
description |
It was proposed to evaluate the load of fracture of a ceramic restoration-based lithium disilicate (IPS e.max CAD) submitted to different protocols cementation. 70 bases were made of a resin material similar to dentin (NEMA grade G10) to provide standardized preparations, machined to simulate a tooth prepared for full crown (ending Bevel with walls of 6 degrees of convergence) and the anatomy of the root. The root portion was covered with polyurethane poliétere included. Seventy ceramic crowns were fabricated by CAD / CAM system. After evaluating the film thickness of cement (cement analogue technique) crowns were cleaned with distilled water in ultra-som (5 min). Subsequently, the crowns were subjected to different protocols cementation: FZ-zinc phosphate cement; IVMR-ionomer resin modified glass; RDCS-hydrofluoric acid 5% (20 s) + silane (1 min) + dual resin cement , RDCST-hydrofluoric acid 5% (20 s) + silane (1 min) + heat treatment furnace 100 °C (2 min) + dual resin cement; RDS-silane (1min) + dual resin cement; RDST silane (1 min) + heat treatment furnace 100 °C (2 min) + dual resin cement; RAACS-hydrofluoric acid 5% (20 s) + silane (1 min) + self-adhesive resin cement. All samples were subjected to thermomechanical cycling (2,000,000 cycles - 100N, 4 Hz, 5 ºC - 55 ºC, dwell time 60 s), with a stainless steel piston (Ø = 4 mm) in the center of the occlusal surface. The fracture toughness test was performed in a universal testing machine (v = 1 mm/min at 37 ° C in distilled water). Data fracture resistance (N) were subjected to ANOVA (one factor) and Tukey's test with α = 0.05. We conducted a finite element analysis to check the distribution of the stresses on the crown. Through scanning electron microscopy were performed on two samples from each group, representative photomicrographs of surface treatment . For fractographic analysis, we used the stereo type of fracture... |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-05-09 2015-05-14T16:53:17Z 2015-05-14T16:53:17Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
CARVALHO, Rodrigo Furtado de. Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio. 2014. 124 f. Tese (Doutorado) - Universidade Estadual Paulista Júlio de Mesquita Filho Instituto de Ciência e Tecnologia, 2014. http://hdl.handle.net/11449/123286 000822600 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/10-04-2015/000822600.pdf 33004145070P8 0967916388665754 0000-0003-0586-4644 |
identifier_str_mv |
CARVALHO, Rodrigo Furtado de. Efeito de protocolos de cimentação na carga de fratura para uma cerâmica de dissilicato de lítio. 2014. 124 f. Tese (Doutorado) - Universidade Estadual Paulista Júlio de Mesquita Filho Instituto de Ciência e Tecnologia, 2014. 000822600 33004145070P8 0967916388665754 0000-0003-0586-4644 |
url |
http://hdl.handle.net/11449/123286 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/10-04-2015/000822600.pdf |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
124 f.: il. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808128668325642240 |