Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility

Detalhes bibliográficos
Autor(a) principal: Albano, Carolina Simão [UNESP]
Data de Publicação: 2020
Outros Autores: Gomes, Anderson Moreira [UNESP], da Silva Feltran, Geórgia [UNESP], da Costa Fernandes, Célio Junior [UNESP], Trino, Luciana Daniele [UNESP], Zambuzzi, Willian Fernando [UNESP], Lisboa-Filho, Paulo Noronha [UNESP]
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1007/s10856-020-06437-y
http://hdl.handle.net/11449/206797
Resumo: Novel-biofunctionalized surfaces are required to improve the performance of endosseous implants, which are mainly related to the resistance against biocorrosion, as well as for the consideration of osteoinductive phenomena. Among different strategies, the use of bisphosphonate molecules as linkers between titanium dioxide (TiO2) surfaces and proteins is a distinctive approach, one in which bisphosphonate could play a role in the osseointegration. Thus, to address this issue, we proposed a novel biofunctionalization of TiO2 surfaces using sodium alendronate (ALN) as a linker and bovine serum albumin as the protein. Physicochemical analysis of the functionalized surfaces was performed using contact angle analyses and surface roughness measurements, which indicated an efficient functionalization. The biocompatibility of the functionalized surfaces was analyzed through the adhesion behavior of the pre-osteoblasts onto the samples. Overall, our data showed a significant improvement concerning the cell adhesion by modulating the adhesion cell-related set of genes. The obtained results show that for modified surfaces there is an increase of up to 100 times in the percentage of cells adhered when compared to the control, besides the extracellular matrix remodeling seemed to be an essential prerequisite for the early stages of cell adhesion on to the biomaterials, which was assayed by evaluating the matrix metalloproteinase activities as well as the gene activations. In the expressions of the Bsp and Bglap2 genes, for the group containing ALN (TiO2 + ALN), it was observed an increase in expression (approximately sixfold change) when compared to the control. Altogether, our data clearly showed that the bisphosphonate-biofunctionalized surface enhanced the biocompatibility of titanium and claims to further progress preclinical in vivo experimentation.
id UNSP_f4a3ae484ec0a9ace7d3d28c03faf608
oai_identifier_str oai:repositorio.unesp.br:11449/206797
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Bisphosphonate-based surface biofunctionalization improves titanium biocompatibilityNovel-biofunctionalized surfaces are required to improve the performance of endosseous implants, which are mainly related to the resistance against biocorrosion, as well as for the consideration of osteoinductive phenomena. Among different strategies, the use of bisphosphonate molecules as linkers between titanium dioxide (TiO2) surfaces and proteins is a distinctive approach, one in which bisphosphonate could play a role in the osseointegration. Thus, to address this issue, we proposed a novel biofunctionalization of TiO2 surfaces using sodium alendronate (ALN) as a linker and bovine serum albumin as the protein. Physicochemical analysis of the functionalized surfaces was performed using contact angle analyses and surface roughness measurements, which indicated an efficient functionalization. The biocompatibility of the functionalized surfaces was analyzed through the adhesion behavior of the pre-osteoblasts onto the samples. Overall, our data showed a significant improvement concerning the cell adhesion by modulating the adhesion cell-related set of genes. The obtained results show that for modified surfaces there is an increase of up to 100 times in the percentage of cells adhered when compared to the control, besides the extracellular matrix remodeling seemed to be an essential prerequisite for the early stages of cell adhesion on to the biomaterials, which was assayed by evaluating the matrix metalloproteinase activities as well as the gene activations. In the expressions of the Bsp and Bglap2 genes, for the group containing ALN (TiO2 + ALN), it was observed an increase in expression (approximately sixfold change) when compared to the control. Altogether, our data clearly showed that the bisphosphonate-biofunctionalized surface enhanced the biocompatibility of titanium and claims to further progress preclinical in vivo experimentation.Department of Chemistry and Biochemistry Institute of Biosciences of Botucatu UNESP—São Paulo State UniversityDepartment of Physics UNESP—São Paulo State University School of SciencesElectron Microscopy Center Institute of Biosciences of Botucatu UNESP—São Paulo State UniversityDepartment of Chemistry and Biochemistry Institute of Biosciences of Botucatu UNESP—São Paulo State UniversityDepartment of Physics UNESP—São Paulo State University School of SciencesElectron Microscopy Center Institute of Biosciences of Botucatu UNESP—São Paulo State UniversityUniversidade Estadual Paulista (Unesp)Albano, Carolina Simão [UNESP]Gomes, Anderson Moreira [UNESP]da Silva Feltran, Geórgia [UNESP]da Costa Fernandes, Célio Junior [UNESP]Trino, Luciana Daniele [UNESP]Zambuzzi, Willian Fernando [UNESP]Lisboa-Filho, Paulo Noronha [UNESP]2021-06-25T10:44:03Z2021-06-25T10:44:03Z2020-11-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://dx.doi.org/10.1007/s10856-020-06437-yJournal of Materials Science: Materials in Medicine, v. 31, n. 11, 2020.1573-48380957-4530http://hdl.handle.net/11449/20679710.1007/s10856-020-06437-y2-s2.0-85095600042Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengJournal of Materials Science: Materials in Medicineinfo:eu-repo/semantics/openAccess2021-10-23T15:25:00Zoai:repositorio.unesp.br:11449/206797Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T23:24:02.968497Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
title Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
spellingShingle Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
Albano, Carolina Simão [UNESP]
title_short Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
title_full Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
title_fullStr Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
title_full_unstemmed Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
title_sort Bisphosphonate-based surface biofunctionalization improves titanium biocompatibility
author Albano, Carolina Simão [UNESP]
author_facet Albano, Carolina Simão [UNESP]
Gomes, Anderson Moreira [UNESP]
da Silva Feltran, Geórgia [UNESP]
da Costa Fernandes, Célio Junior [UNESP]
Trino, Luciana Daniele [UNESP]
Zambuzzi, Willian Fernando [UNESP]
Lisboa-Filho, Paulo Noronha [UNESP]
author_role author
author2 Gomes, Anderson Moreira [UNESP]
da Silva Feltran, Geórgia [UNESP]
da Costa Fernandes, Célio Junior [UNESP]
Trino, Luciana Daniele [UNESP]
Zambuzzi, Willian Fernando [UNESP]
Lisboa-Filho, Paulo Noronha [UNESP]
author2_role author
author
author
author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
dc.contributor.author.fl_str_mv Albano, Carolina Simão [UNESP]
Gomes, Anderson Moreira [UNESP]
da Silva Feltran, Geórgia [UNESP]
da Costa Fernandes, Célio Junior [UNESP]
Trino, Luciana Daniele [UNESP]
Zambuzzi, Willian Fernando [UNESP]
Lisboa-Filho, Paulo Noronha [UNESP]
description Novel-biofunctionalized surfaces are required to improve the performance of endosseous implants, which are mainly related to the resistance against biocorrosion, as well as for the consideration of osteoinductive phenomena. Among different strategies, the use of bisphosphonate molecules as linkers between titanium dioxide (TiO2) surfaces and proteins is a distinctive approach, one in which bisphosphonate could play a role in the osseointegration. Thus, to address this issue, we proposed a novel biofunctionalization of TiO2 surfaces using sodium alendronate (ALN) as a linker and bovine serum albumin as the protein. Physicochemical analysis of the functionalized surfaces was performed using contact angle analyses and surface roughness measurements, which indicated an efficient functionalization. The biocompatibility of the functionalized surfaces was analyzed through the adhesion behavior of the pre-osteoblasts onto the samples. Overall, our data showed a significant improvement concerning the cell adhesion by modulating the adhesion cell-related set of genes. The obtained results show that for modified surfaces there is an increase of up to 100 times in the percentage of cells adhered when compared to the control, besides the extracellular matrix remodeling seemed to be an essential prerequisite for the early stages of cell adhesion on to the biomaterials, which was assayed by evaluating the matrix metalloproteinase activities as well as the gene activations. In the expressions of the Bsp and Bglap2 genes, for the group containing ALN (TiO2 + ALN), it was observed an increase in expression (approximately sixfold change) when compared to the control. Altogether, our data clearly showed that the bisphosphonate-biofunctionalized surface enhanced the biocompatibility of titanium and claims to further progress preclinical in vivo experimentation.
publishDate 2020
dc.date.none.fl_str_mv 2020-11-01
2021-06-25T10:44:03Z
2021-06-25T10:44:03Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1007/s10856-020-06437-y
Journal of Materials Science: Materials in Medicine, v. 31, n. 11, 2020.
1573-4838
0957-4530
http://hdl.handle.net/11449/206797
10.1007/s10856-020-06437-y
2-s2.0-85095600042
url http://dx.doi.org/10.1007/s10856-020-06437-y
http://hdl.handle.net/11449/206797
identifier_str_mv Journal of Materials Science: Materials in Medicine, v. 31, n. 11, 2020.
1573-4838
0957-4530
10.1007/s10856-020-06437-y
2-s2.0-85095600042
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv Journal of Materials Science: Materials in Medicine
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808129517241237504