Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes

Detalhes bibliográficos
Autor(a) principal: Sydney, Roberto Bittencourt
Data de Publicação: 2007
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Biblioteca Digital de Teses e Dissertações da USC
Texto Completo: http://localhost:8080/tede/handle/tede/73
Resumo: Passive fit between the infra-structure and the abutments is one of the main aspects that determine the clinical success of implant-supported prosthesis. Among the clinical and laboratorial steps that may influence passivity are the transfer and impression techniques, once they affect the construction of accurate master casts. The objective of this paper is to verify the quality of master casts built from the multifunctional guide technique for impression and transfer of implants, comparing its accuracy with the precision of models built only by indexing for infra-structure fit test. Two CNC (computer numeric controlled) milled infra-structures were fabricated over 2 resin maxillas (controls): one with 6 implants in favorable positions for rehabilitation and one with 6 implants in unfavorable positions. Quality of infrastructure fit on the multifunctional guide models (test) and index was evaluated under light microscopy. The technique tested resulted in accurate models , with maximum average distortion of 5 µm from control. There were no differences between the test group and the index group, under favorable and unfavorable conditions. We can conclude that when using the multifunctional guide technique for implant impression and transfer, there is no need for indexing implants for infra-structure accuracy test, even when the fixtures are in an unfavorable position for rehabilitation.
id USC_fff8b93c17e3725e63911e112420b30f
oai_identifier_str oai:localhost:tede/73
network_acronym_str USC
network_name_str Biblioteca Digital de Teses e Dissertações da USC
repository_id_str
spelling Francischone, Carlos EduardoCPF:55930034834http://lattes.cnpq.br/5622847033913614CPF:02954101911http://lattes.cnpq.br/7710000216228907Sydney, Roberto Bittencourt2015-09-14T10:14:10Z2008-09-302007-02-06SYDNEY, Roberto Bittencourt. Comparative study of the accuracy of models obtained with a guide and multifunctional index in prosthesis on implants. 2007. 100 f. Dissertação (Mestrado em Biologia Oral - Implantologia) - IASCJ - Universidade Sagrado Coração, Bauru, 2007.http://localhost:8080/tede/handle/tede/73Passive fit between the infra-structure and the abutments is one of the main aspects that determine the clinical success of implant-supported prosthesis. Among the clinical and laboratorial steps that may influence passivity are the transfer and impression techniques, once they affect the construction of accurate master casts. The objective of this paper is to verify the quality of master casts built from the multifunctional guide technique for impression and transfer of implants, comparing its accuracy with the precision of models built only by indexing for infra-structure fit test. Two CNC (computer numeric controlled) milled infra-structures were fabricated over 2 resin maxillas (controls): one with 6 implants in favorable positions for rehabilitation and one with 6 implants in unfavorable positions. Quality of infrastructure fit on the multifunctional guide models (test) and index was evaluated under light microscopy. The technique tested resulted in accurate models , with maximum average distortion of 5 µm from control. There were no differences between the test group and the index group, under favorable and unfavorable conditions. We can conclude that when using the multifunctional guide technique for implant impression and transfer, there is no need for indexing implants for infra-structure accuracy test, even when the fixtures are in an unfavorable position for rehabilitation.Um dos aspectos fundamentais para o sucesso clínico das próteses implantosuportadas é a adaptação passiva das estruturas protética sobre os pilares. Dentre as variáveis clínicas e laboratoriais intrínsecas ao tratamento reabilitador estão as técnicas de transferência, pois influenciam decisivamente na fabricação de modelos de trabalho fiéis. O objetivo do presente trabalho foi verificar a qualidade de modelos de trabalho criados a partir da técnica de transferência com guia multifuncional, comparando sua precisão com as do index para prova. Para tanto, foram utilizadas duas estruturas de titânio fresadas pré-fabricadas sobre dois modelos de maxila que serviram como controle, sendo o primeiro com 6 implantes em posição favorável para reabilitação e o segundo com 6 implantes em posição desfavorável. A qualidade da adaptação da estrutura sobre os modelos de trabalho (modelos teste) e index foram avaliadas com microscópio comparador. Os resultados mostraram que a técnica avaliada gerou modelos precisos, com diferença média máxima de 5 µm em relação ao controle. Não houve diferença entre os modelos teste e os index, tanto quando os implantes estavam em posição favorável como desfavorável. Pode-se concluir que, ao utilizar o guia multifuncional para moldagem de transferência de implantes e relacionamento interoclusal, não há necessidade de confecção de index, independentemente da posição dos implantes.Made available in DSpace on 2015-09-14T10:14:10Z (GMT). No. of bitstreams: 1 dissertacao_roberto_bittencourt_sydney.pdf: 2112876 bytes, checksum: f8d031a9bd8d4438e8d1f64812048c6b (MD5) Previous issue date: 2007-02-06application/pdfporIASCJ - Universidade Sagrado CoraçãoImplantologiaUSCBRCiências da Saúde e BiológicasOSSEOINTEGRAÇÃOMOLDAGEMPASSIVIDADEPRÓTESE FIXAIMPLANTESADAPTAÇÃODESAJUSTEPRECISÃOTÉCNICAS DE TRANSFERÊNCIAOSSEOINTEGRATIONIMPRESSIONPASSIVITYFIXED PROSTHESESIMPLANTSADAPTATIONMISFITPRECISIONTRANSFER TECHNIQUECIENCIAS DA SAUDE::ODONTOLOGIAEstudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantesComparative study of the accuracy of models obtained with a guide and multifunctional index in prosthesis on implantsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis1715202039863940245600600600-753428887677182963-2070498469879244349info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da USCinstname:Universidade do Sagrado Coração (USC)instacron:USCORIGINALdissertacao_roberto_bittencourt_sydney.pdfapplication/pdf2112876http://localhost:8080/tede/bitstream/tede/73/1/dissertacao_roberto_bittencourt_sydney.pdff8d031a9bd8d4438e8d1f64812048c6bMD51tede/732015-10-16 16:32:32.57oai:localhost:tede/73Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.usc.br:8443/http://tede2.usc.br:8080/oai/requestbiblicorjesu@unisagrado.edu.br||normalizacao@usc.bropendoar:2015-10-16T19:32:32Biblioteca Digital de Teses e Dissertações da USC - Universidade do Sagrado Coração (USC)false
dc.title.por.fl_str_mv Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
dc.title.alternative.eng.fl_str_mv Comparative study of the accuracy of models obtained with a guide and multifunctional index in prosthesis on implants
title Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
spellingShingle Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
Sydney, Roberto Bittencourt
OSSEOINTEGRAÇÃO
MOLDAGEM
PASSIVIDADE
PRÓTESE FIXA
IMPLANTES
ADAPTAÇÃO
DESAJUSTE
PRECISÃO
TÉCNICAS DE TRANSFERÊNCIA
OSSEOINTEGRATION
IMPRESSION
PASSIVITY
FIXED PROSTHESES
IMPLANTS
ADAPTATION
MISFIT
PRECISION
TRANSFER TECHNIQUE
CIENCIAS DA SAUDE::ODONTOLOGIA
title_short Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
title_full Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
title_fullStr Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
title_full_unstemmed Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
title_sort Estudo comparativo da precisão de modelos obtidos com guia multifuncional e index em prótese sobre implantes
author Sydney, Roberto Bittencourt
author_facet Sydney, Roberto Bittencourt
author_role author
dc.contributor.advisor1.fl_str_mv Francischone, Carlos Eduardo
dc.contributor.advisor1ID.fl_str_mv CPF:55930034834
dc.contributor.advisor1Lattes.fl_str_mv http://lattes.cnpq.br/5622847033913614
dc.contributor.authorID.fl_str_mv CPF:02954101911
dc.contributor.authorLattes.fl_str_mv http://lattes.cnpq.br/7710000216228907
dc.contributor.author.fl_str_mv Sydney, Roberto Bittencourt
contributor_str_mv Francischone, Carlos Eduardo
dc.subject.por.fl_str_mv OSSEOINTEGRAÇÃO
MOLDAGEM
PASSIVIDADE
PRÓTESE FIXA
IMPLANTES
ADAPTAÇÃO
DESAJUSTE
PRECISÃO
TÉCNICAS DE TRANSFERÊNCIA
topic OSSEOINTEGRAÇÃO
MOLDAGEM
PASSIVIDADE
PRÓTESE FIXA
IMPLANTES
ADAPTAÇÃO
DESAJUSTE
PRECISÃO
TÉCNICAS DE TRANSFERÊNCIA
OSSEOINTEGRATION
IMPRESSION
PASSIVITY
FIXED PROSTHESES
IMPLANTS
ADAPTATION
MISFIT
PRECISION
TRANSFER TECHNIQUE
CIENCIAS DA SAUDE::ODONTOLOGIA
dc.subject.eng.fl_str_mv OSSEOINTEGRATION
IMPRESSION
PASSIVITY
FIXED PROSTHESES
IMPLANTS
ADAPTATION
MISFIT
PRECISION
TRANSFER TECHNIQUE
dc.subject.cnpq.fl_str_mv CIENCIAS DA SAUDE::ODONTOLOGIA
description Passive fit between the infra-structure and the abutments is one of the main aspects that determine the clinical success of implant-supported prosthesis. Among the clinical and laboratorial steps that may influence passivity are the transfer and impression techniques, once they affect the construction of accurate master casts. The objective of this paper is to verify the quality of master casts built from the multifunctional guide technique for impression and transfer of implants, comparing its accuracy with the precision of models built only by indexing for infra-structure fit test. Two CNC (computer numeric controlled) milled infra-structures were fabricated over 2 resin maxillas (controls): one with 6 implants in favorable positions for rehabilitation and one with 6 implants in unfavorable positions. Quality of infrastructure fit on the multifunctional guide models (test) and index was evaluated under light microscopy. The technique tested resulted in accurate models , with maximum average distortion of 5 µm from control. There were no differences between the test group and the index group, under favorable and unfavorable conditions. We can conclude that when using the multifunctional guide technique for implant impression and transfer, there is no need for indexing implants for infra-structure accuracy test, even when the fixtures are in an unfavorable position for rehabilitation.
publishDate 2007
dc.date.issued.fl_str_mv 2007-02-06
dc.date.available.fl_str_mv 2008-09-30
dc.date.accessioned.fl_str_mv 2015-09-14T10:14:10Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv SYDNEY, Roberto Bittencourt. Comparative study of the accuracy of models obtained with a guide and multifunctional index in prosthesis on implants. 2007. 100 f. Dissertação (Mestrado em Biologia Oral - Implantologia) - IASCJ - Universidade Sagrado Coração, Bauru, 2007.
dc.identifier.uri.fl_str_mv http://localhost:8080/tede/handle/tede/73
identifier_str_mv SYDNEY, Roberto Bittencourt. Comparative study of the accuracy of models obtained with a guide and multifunctional index in prosthesis on implants. 2007. 100 f. Dissertação (Mestrado em Biologia Oral - Implantologia) - IASCJ - Universidade Sagrado Coração, Bauru, 2007.
url http://localhost:8080/tede/handle/tede/73
dc.language.iso.fl_str_mv por
language por
dc.relation.program.fl_str_mv 1715202039863940245
dc.relation.confidence.fl_str_mv 600
600
600
dc.relation.department.fl_str_mv -753428887677182963
dc.relation.cnpq.fl_str_mv -2070498469879244349
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv IASCJ - Universidade Sagrado Coração
dc.publisher.program.fl_str_mv Implantologia
dc.publisher.initials.fl_str_mv USC
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Ciências da Saúde e Biológicas
publisher.none.fl_str_mv IASCJ - Universidade Sagrado Coração
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações da USC
instname:Universidade do Sagrado Coração (USC)
instacron:USC
instname_str Universidade do Sagrado Coração (USC)
instacron_str USC
institution USC
reponame_str Biblioteca Digital de Teses e Dissertações da USC
collection Biblioteca Digital de Teses e Dissertações da USC
bitstream.url.fl_str_mv http://localhost:8080/tede/bitstream/tede/73/1/dissertacao_roberto_bittencourt_sydney.pdf
bitstream.checksum.fl_str_mv f8d031a9bd8d4438e8d1f64812048c6b
bitstream.checksumAlgorithm.fl_str_mv MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da USC - Universidade do Sagrado Coração (USC)
repository.mail.fl_str_mv biblicorjesu@unisagrado.edu.br||normalizacao@usc.br
_version_ 1800410544018030592