Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.

Detalhes bibliográficos
Autor(a) principal: Figueiredo, Tiago Petermann
Data de Publicação: 2016
Tipo de documento: Dissertação
Idioma: eng
Título da fonte: Biblioteca Digital de Teses e Dissertações da USP
Texto Completo: http://www.teses.usp.br/teses/disponiveis/3/3151/tde-16032017-102949/
Resumo: The present study has the objective of evaluating the effect of lubricant features on the friction coefficient by using three different lubricants (two synthetics and one mineral), which are used in automotive transmissions. In order to perform experiments, it was used a ball-on-disc system. The disc was manufactured with the same mechanical properties as transmission gears and the ball was made of 52100 SAE steel. The test parameters were defined based on a dynamic analysis conducted using \"ISOCAD\" which takes into account the geometry of the gear and vehicle dynamics (applied force and speed) during the tribological experiments. In order to set the temperature parameter, the lubricant testing temperature of a standard fuel economy was used. Experiments were conducted in two different lubrication conditions: i (starved) and ii (fully flooded). After the parameters were defined, it was possible to calculate the oil film thickness and, thus define the lubrication regime reached in each condition. Mixed and/or boundary lubrication was obtained in all the tests. Results showed the relationship between the speed and the specific oil film using a Khonsari and Masjedi formulation (2014), which takes into account the effect of surface roughness and, it is based on Downson and Higginson\'s (1981) formulation. The chemical analysis of the lubricant showed a relationship between friction coefficient and the additives used in lubricants. These results also showed the oil performance under different temperatures, speeds and loads. The best results were obtained for a synthetic lubricant.
id USP_f2a10c0189c292bb7432f98108ff67d2
oai_identifier_str oai:teses.usp.br:tde-16032017-102949
network_acronym_str USP
network_name_str Biblioteca Digital de Teses e Dissertações da USP
repository_id_str 2721
spelling Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.Efeito das propriedades do lufrificante no coeficiente de atrito sobre diferentes temperaturas, velocidade e cargas utilizando teste \"ball-on-disc\".AtritoDinâmica veicularFriction coefficientLubricationLubrificaçãoTribologiaTribologyVehicle dynamicsThe present study has the objective of evaluating the effect of lubricant features on the friction coefficient by using three different lubricants (two synthetics and one mineral), which are used in automotive transmissions. In order to perform experiments, it was used a ball-on-disc system. The disc was manufactured with the same mechanical properties as transmission gears and the ball was made of 52100 SAE steel. The test parameters were defined based on a dynamic analysis conducted using \"ISOCAD\" which takes into account the geometry of the gear and vehicle dynamics (applied force and speed) during the tribological experiments. In order to set the temperature parameter, the lubricant testing temperature of a standard fuel economy was used. Experiments were conducted in two different lubrication conditions: i (starved) and ii (fully flooded). After the parameters were defined, it was possible to calculate the oil film thickness and, thus define the lubrication regime reached in each condition. Mixed and/or boundary lubrication was obtained in all the tests. Results showed the relationship between the speed and the specific oil film using a Khonsari and Masjedi formulation (2014), which takes into account the effect of surface roughness and, it is based on Downson and Higginson\'s (1981) formulation. The chemical analysis of the lubricant showed a relationship between friction coefficient and the additives used in lubricants. These results also showed the oil performance under different temperatures, speeds and loads. The best results were obtained for a synthetic lubricant.O presente estudo tem o objetivo de avaliar o efeito de propriedades dos lubrificantes sobre o coeficiente de atrito. Para tanto foram testados três lubrificantes diferentes (dois sintéticos e um mineral), que são utilizados em transmissões automotivas. Os experimentos foram conduzidos utilizando um sistema tribológico denominado \"ball-on-disc\". Os discos foram fabricados com as mesmas propriedades mecânicas das engrenagens de transmissão, já as esferas foram fabricadas com aço SAE 52100. Os parâmetros de teste foram definidos com base na análise dinâmica conduzida utilizando o software \"ISOCAD\", que leva em conta a geometria da engrenagem e a dinâmica do veículo (força aplicada e velocidade) durante os ensaios tribológicos. Para definir os parâmetros de temperatura, foram utilizadas as mesmas temperaturas encontradas durante o ensaio de economia de combustível padronizado. Experimentos foram realizados em duas condições de lubrificação diferentes: i) fornecimento limitado de lubrificante, ou \"Starved\" e ii) condição de lubrificação imersa, ou \"Fully flooded\". Depois dos parâmetros definidos, foi possível calcular a espessura de filme de óleo, de forma a definir o regime de lubrificação alcançado em cada condição. Lubrificação mista e limítrofe foi obtida todas as condições de testes. Os resultados mostraram a relação entre a velocidade e o filme de óleo específico usando uma formulação de Khonsari e Masjedi (2014), que leva em conta o efeito da rugosidade da superfície e baseia-se na formulação de Downson e Higginson (1981). A análise química do lubrificante mostrou que existe uma relação entre o coeficiente de atrito e os aditivos utilizados nos lubrificantes. Estes resultados também mostram o desempenho dos lubrificantes em diferentes temperaturas, velocidades e cargas. Os melhores resultados foram obtidos para um lubrificante sintético.Biblioteca Digitais de Teses e Dissertações da USPMachado, Izabel FernandaFigueiredo, Tiago Petermann2016-12-15info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://www.teses.usp.br/teses/disponiveis/3/3151/tde-16032017-102949/reponame:Biblioteca Digital de Teses e Dissertações da USPinstname:Universidade de São Paulo (USP)instacron:USPLiberar o conteúdo para acesso público.info:eu-repo/semantics/openAccesseng2024-10-09T13:16:04Zoai:teses.usp.br:tde-16032017-102949Biblioteca Digital de Teses e Dissertaçõeshttp://www.teses.usp.br/PUBhttp://www.teses.usp.br/cgi-bin/mtd2br.plvirginia@if.usp.br|| atendimento@aguia.usp.br||virginia@if.usp.bropendoar:27212024-10-09T13:16:04Biblioteca Digital de Teses e Dissertações da USP - Universidade de São Paulo (USP)false
dc.title.none.fl_str_mv Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
Efeito das propriedades do lufrificante no coeficiente de atrito sobre diferentes temperaturas, velocidade e cargas utilizando teste \"ball-on-disc\".
title Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
spellingShingle Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
Figueiredo, Tiago Petermann
Atrito
Dinâmica veicular
Friction coefficient
Lubrication
Lubrificação
Tribologia
Tribology
Vehicle dynamics
title_short Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
title_full Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
title_fullStr Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
title_full_unstemmed Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
title_sort Effect of lubricant propertieson the friction coefficient under different temperatures, speeds and loads using a ball-on-disc test.
author Figueiredo, Tiago Petermann
author_facet Figueiredo, Tiago Petermann
author_role author
dc.contributor.none.fl_str_mv Machado, Izabel Fernanda
dc.contributor.author.fl_str_mv Figueiredo, Tiago Petermann
dc.subject.por.fl_str_mv Atrito
Dinâmica veicular
Friction coefficient
Lubrication
Lubrificação
Tribologia
Tribology
Vehicle dynamics
topic Atrito
Dinâmica veicular
Friction coefficient
Lubrication
Lubrificação
Tribologia
Tribology
Vehicle dynamics
description The present study has the objective of evaluating the effect of lubricant features on the friction coefficient by using three different lubricants (two synthetics and one mineral), which are used in automotive transmissions. In order to perform experiments, it was used a ball-on-disc system. The disc was manufactured with the same mechanical properties as transmission gears and the ball was made of 52100 SAE steel. The test parameters were defined based on a dynamic analysis conducted using \"ISOCAD\" which takes into account the geometry of the gear and vehicle dynamics (applied force and speed) during the tribological experiments. In order to set the temperature parameter, the lubricant testing temperature of a standard fuel economy was used. Experiments were conducted in two different lubrication conditions: i (starved) and ii (fully flooded). After the parameters were defined, it was possible to calculate the oil film thickness and, thus define the lubrication regime reached in each condition. Mixed and/or boundary lubrication was obtained in all the tests. Results showed the relationship between the speed and the specific oil film using a Khonsari and Masjedi formulation (2014), which takes into account the effect of surface roughness and, it is based on Downson and Higginson\'s (1981) formulation. The chemical analysis of the lubricant showed a relationship between friction coefficient and the additives used in lubricants. These results also showed the oil performance under different temperatures, speeds and loads. The best results were obtained for a synthetic lubricant.
publishDate 2016
dc.date.none.fl_str_mv 2016-12-15
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://www.teses.usp.br/teses/disponiveis/3/3151/tde-16032017-102949/
url http://www.teses.usp.br/teses/disponiveis/3/3151/tde-16032017-102949/
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv
dc.rights.driver.fl_str_mv Liberar o conteúdo para acesso público.
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Liberar o conteúdo para acesso público.
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.coverage.none.fl_str_mv
dc.publisher.none.fl_str_mv Biblioteca Digitais de Teses e Dissertações da USP
publisher.none.fl_str_mv Biblioteca Digitais de Teses e Dissertações da USP
dc.source.none.fl_str_mv
reponame:Biblioteca Digital de Teses e Dissertações da USP
instname:Universidade de São Paulo (USP)
instacron:USP
instname_str Universidade de São Paulo (USP)
instacron_str USP
institution USP
reponame_str Biblioteca Digital de Teses e Dissertações da USP
collection Biblioteca Digital de Teses e Dissertações da USP
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da USP - Universidade de São Paulo (USP)
repository.mail.fl_str_mv virginia@if.usp.br|| atendimento@aguia.usp.br||virginia@if.usp.br
_version_ 1815256512010911744

Registros relacionados