Modelação e Negociação de Flexibilidade em Comunidades de Energia Renovável

• Autor(a) principal: Freitas, João Carlos Agrela
• Data de Publicação: 2023
• Tipo de documento: Dissertação
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.22/23977
• topic: Local Flexibility Market; Available Flexibility Modelling; Prosumer Flexibility; Flexibility Community Market; Domínio/Área Científica::Engenharia e Tecnologia

The progressive replacement of traditional generation resources with intermittent resources has reduced the available supply-side flexibility and increased the need to unlock flexibility on the demand-side. At the same time, the rising electricity consumption in residential buildings requires an analysis of the potential flexibility of the loads within them to contribute to the operation needs of electrical grids. Lastly, regulations governing self consumption have allowed end consumers to form energy communities based on local electricity markets. This is an additional incentive to define strategies for trading available flexibility at local level, in separate but simultaneously integrated structures within wholesale electricity markets. The proposed dissertation work focuses on studying the flexibility of energy production and consumption by prosumers within a Renewable Energy Community (REC). The objective is to investigate how residential flexibility can be determined, modeled, and aggregated for trading in a local market created for this purpose. The work to be developed will present a two-stage model that determines residential technical flexibility and establishes a local market only for its transaction. In the first stage, the optimal scheduling of domestic devices (flexible units or FUs) for each prosumer is determined, serving as a baseline for comparison, along with the technical limits of flexibility (maximum and minimum possible consumption profiles) for each FU. In the second stage, a market model is established only for flexibility exchanges. The technical flexibility determined in the first stage is offered to the Community Manager (CM) as flexibility offer, with an associated price. This entity acts as an aggregator and simultaneously as the operator of the local market. At this level, the Distribution System Operator (DSO) submits its flexibility requirements for the next day to the CM, who is responsible for executing the clearing process. The pricing of the flexibility offered by prosumers in the market is based on the base energy tariff they are subject to, which corresponds to the cost of their optimal scheduling obtained in the first stage, without considering this flexibility. Therefore, offering flexibility becomes an incentive to reduce prosumers energy costs or increase their utility, complementing their mere participation in energy markets. A case study based on a renewable energy community with a strong penetration of emerging technologies is used to validate and demonstrate the relevance of the proposed approach in terms of determining and activating residential FU flexibility. The obtained results show that participation in the local flexibility market leads to a reduction in prosumers energy costs, around 4.5%, in average. It can be an incentive for prosumers to join RECs that would not only have local energy trading structures but also mechanisms for negotiating and sharing flexibility. In addition, it was evidenced that the impact of electric vehicle chargers and battery energy storage systems on the total flexibility offered and accepted in the market is much greater than that the impact of other small loads studied. This not only constitutes an incentive for the study of the operational flexibility of these resources but also for investments in these emerging technologies.