Recovery of bioactive anthocyanin pigments from Ficus carica L. peel by heat, microwave, and ultrasound based extraction techniques

• Autor(a) principal: Backes, Emanueli
• Data de Publicação: 2018
• Outros Autores: Pereira, Carla, Barros, Lillian, Prieto Lage, Miguel A., Genena, Aziza Kamal, Barreiro, M.F., Ferreira, Isabel C.F.R.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10198/10795
• topic: Ficus carica L.; Heat/microwave/ultrasound assisted extraction; Peel by-product, anthocyanin; Response surface methodology

Due to its coloration, the fig (Ficus carica L.) peel, a by-product of fruit processing and/or consumption, is a potential source of anthocyanin compounds. In the present study different extraction techniques (heat, ultrasound, and microwave) were compared aiming to recover the anthocyanin pigments and optimize its extraction conditions. A response surface methodology tool with three factors and five levels for each factor was used according to a circumscribed central composite design. The variables tested for the heat and microwave extraction methods were time, temperature, and solvent proportion (ethanol/water ratio), meanwhile, for the ultrasound method, the variables tested were the ultrasonic power, time, and solvent proportion. The anthocyanin composition of the extract was determined by HPLC-DAD-ESI/MS, and the used criteria responses were: i) quantification of cyanidin 3-rutinoside (C) in the extracted residue (mg C/g R) and in the dried peel (mg C/g P dw), and the extraction yield of the obtained residue (g R/g P dw). Ultrasound extraction was the most effective method, yielding 3.82 mg C/g R at the optimal global extraction conditions (21 min, 310 W, and 100% of ethanol). Additionally, the solid-to-liquid ratio effect was studied at the optimal conditions, using a dose-response format, in view of its plausible transference to industrial level. For the ultrasound method, an increased non-linear relationship was observed for concentrations in the range 5 to 200 g/L, being the optimal solution close to 150 g/L. In brief, the obtained results show the potential of fig peels as a source of anthocyanin pigments, with potential uses in various industrial fields, such as food, pharmaceutical, and cosmetic.