Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity

Detalhes bibliográficos
Autor(a) principal: Fabiola Costa
Data de Publicação: 2014
Outros Autores: Silvia Maia, Joana Gomes, Paula Gomes, Cristina C L Martins
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: https://repositorio-aberto.up.pt/handle/10216/82143
Resumo: hLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy.
id RCAP_bd7015d3d89bd5d174e7e749990071de
oai_identifier_str oai:repositorio-aberto.up.pt:10216/82143
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activityEngenharia dos materiaisMaterials engineeringhLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy.20142014-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttps://repositorio-aberto.up.pt/handle/10216/82143eng1742-706110.1016/j.actbio.2014.02.028Fabiola CostaSilvia MaiaJoana GomesPaula GomesCristina C L Martinsinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-11-29T13:02:20Zoai:repositorio-aberto.up.pt:10216/82143Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T23:32:19.727496Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
title Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
spellingShingle Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
Fabiola Costa
Engenharia dos materiais
Materials engineering
title_short Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
title_full Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
title_fullStr Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
title_full_unstemmed Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
title_sort Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
author Fabiola Costa
author_facet Fabiola Costa
Silvia Maia
Joana Gomes
Paula Gomes
Cristina C L Martins
author_role author
author2 Silvia Maia
Joana Gomes
Paula Gomes
Cristina C L Martins
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Fabiola Costa
Silvia Maia
Joana Gomes
Paula Gomes
Cristina C L Martins
dc.subject.por.fl_str_mv Engenharia dos materiais
Materials engineering
topic Engenharia dos materiais
Materials engineering
description hLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy.
publishDate 2014
dc.date.none.fl_str_mv 2014
2014-01-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://repositorio-aberto.up.pt/handle/10216/82143
url https://repositorio-aberto.up.pt/handle/10216/82143
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 1742-7061
10.1016/j.actbio.2014.02.028
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799135633809080320