Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Outros Autores: | , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
Texto Completo: | https://repositorio-aberto.up.pt/handle/10216/82143 |
Resumo: | hLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy. |
id |
RCAP_bd7015d3d89bd5d174e7e749990071de |
---|---|
oai_identifier_str |
oai:repositorio-aberto.up.pt:10216/82143 |
network_acronym_str |
RCAP |
network_name_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository_id_str |
7160 |
spelling |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activityEngenharia dos materiaisMaterials engineeringhLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy.20142014-01-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttps://repositorio-aberto.up.pt/handle/10216/82143eng1742-706110.1016/j.actbio.2014.02.028Fabiola CostaSilvia MaiaJoana GomesPaula GomesCristina C L Martinsinfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-11-29T13:02:20Zoai:repositorio-aberto.up.pt:10216/82143Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T23:32:19.727496Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse |
dc.title.none.fl_str_mv |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
title |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
spellingShingle |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity Fabiola Costa Engenharia dos materiais Materials engineering |
title_short |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
title_full |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
title_fullStr |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
title_full_unstemmed |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
title_sort |
Characterization of hLF1-11 immobilization onto chitosan ultrathin films, and its effects on antimicrobial activity |
author |
Fabiola Costa |
author_facet |
Fabiola Costa Silvia Maia Joana Gomes Paula Gomes Cristina C L Martins |
author_role |
author |
author2 |
Silvia Maia Joana Gomes Paula Gomes Cristina C L Martins |
author2_role |
author author author author |
dc.contributor.author.fl_str_mv |
Fabiola Costa Silvia Maia Joana Gomes Paula Gomes Cristina C L Martins |
dc.subject.por.fl_str_mv |
Engenharia dos materiais Materials engineering |
topic |
Engenharia dos materiais Materials engineering |
description |
hLF1-11 (GRRRRSVQWCA) is an antimicrobial peptide (AMP) with high activity against methicillin-resistant Staphylococcus aureus (MRSA), the most prevalent species in implant-associated infection. In this work, the effect of the surface immobilization on hLF1-11 antimicrobial activity was studied. Immobilization was performed onto chitosan thin films as a model for an implant coating due to its reported osteogenic and antibacterial properties. Chitosan thin films were produced by spin-coating on gold surfaces. hLF1-11 was immobilized onto these films by its C-terminal cysteine in an orientation that exposes the antimicrobial activity-related arginine-rich portion of the peptide. Two levels of exposure (with and without a polyethylene glycol (PEG) spacer) were analyzed. Covalent immobilization was further compared with the AMP physical adsorption onto chitosan films. Surfaces were characterized using ellipsometry, contact angle measurements, atomic force microscopy, infrared and X-ray photoelectron spectroscopies and using a fluorimetric assay for hLF1-11 quantification. Surface antimicrobial activity was assessed through surface adhesion and viability assays using an MRSA (S. aureus ATCC 33591). The incorporation of hLF1-11 increased significantly bacterial adhesion to chitosan films. However, the presence of hLF1-11, namely when immobilized through a PEG spacer, decreased the viability of adherent bacteria with regard to the control surface. These results demonstrated that hLF1-11 after covalent immobilization by its cysteine can maintain activity, particularly if a spacer is applied. However, further studies, exploring the opposite orientation or the same C-terminal orientation, but non-cysteine related, can help to clarify the potential of the hLF1-11 immobilization strategy. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014 2014-01-01T00:00:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://repositorio-aberto.up.pt/handle/10216/82143 |
url |
https://repositorio-aberto.up.pt/handle/10216/82143 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
1742-7061 10.1016/j.actbio.2014.02.028 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.source.none.fl_str_mv |
reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação instacron:RCAAP |
instname_str |
Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
instacron_str |
RCAAP |
institution |
RCAAP |
reponame_str |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
collection |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) |
repository.name.fl_str_mv |
Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação |
repository.mail.fl_str_mv |
|
_version_ |
1799135633809080320 |