Stripping voltammetric methods for determination of the antiparasitic drug nitazoxanide in bulk form, pharmaceutical formulation and human serum

• Autor(a) principal: El-Desoky,Hanaa S.
• Data de Publicação: 2010
• Outros Autores: Ghoneim,Mohamed M., Abdel-Galeil,Mohamed M.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Journal of the Brazilian Chemical Society (Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0103-50532010000400013
• topic: nitazoxanide; cryptonaz powder; human serum; degradation; determination; stripping voltammetry

Cyclic voltammograms of nitazoxanide recorded at the hanging mercury drop electrode in the Britton-Robinson universal buffer of pH values 2 to 11 containing 20% (v/v) ethanol exhibited a single 4-electron irreversible cathodic peak corresponding to the reduction of its NO2 group to the hydroxylamine stage. Nitazoxanide was found to adsorb onto surface of the mercury electrode in a monolayer surface coverage of 3.16×10-10 mol cm-2 in which each adsorbed molecule occupies an area of 0.525 nm². Based on its adsorption behavior onto the mercury electrode surface, validated linear sweep (LS), differential pulse (DP) and square wave (SW) adsorptive cathodic stripping voltammetric methods were described for determination of bulk nitazoxanide. Limits of detection of 1.5×10-10, 2.4×10-10 and 3.0×10-11 mol L-1 and limits of quantification of 5.0×10-10, 8.0×10-10 and 1.0×10-10 mol L-1 nitazoxanide in the bulk form were achieved by means of the described LS, DP and SW adsorptive cathodic stripping voltammetric methods, respectively. The described methods were successfully applied for determination of nitazoxanide in its pharmaceutical formulation (Cryptonaz powder) and in spiked human serum without the necessity for sample pretreatment, time consuming extraction steps or formation of colored chromogens prior to the analysis. Besides, nitazoxanide was successfully determined without interference from its acid or base-induced degradation products indicating the stability-indicating power of the described voltammetric methods.