Micropropagação de Bambusa vulgaris visando a produção de mudas clonais

Detalhes bibliográficos
Autor(a) principal: Ribeiro, Anatálya dos Santos
Data de Publicação: 2017
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFMT
Texto Completo: http://ri.ufmt.br/handle/1/3127
Resumo: Faced with the growing demand for products derived from woody biomass, bamboo species present interesting morphological and silvicultural characteristics and stand out as an alternative for the composition of forest plantations. However, due to the difficulty of producing large scale seedlings through traditional methods, this potential has not been explored. Therefore, the objective of the present work was to contribute to the improvement of the large - scale clonal multiplication of Bambusa vulgaris by means of the micropropagation technique. In the in vitro establishment, nodal segments of B. vulgaris were inoculated in MS liquid culture medium, where the effect of different solutions of a systemic and contact fungicide (0.5 and 1.0 mL) considering different exposure times (0, 72 and 120 hours). The explants considered established were transferred to a semi-solid MS culture medium containing 3 mg.L-1 BAP to analyze the residual effect of the fungicide along subcultures during multiplication and in vitro elongation of the explants. In the second experiment, established explants of B. vulgaris were transferred to three distinct culture systems (temporary immersion bioreactor, test tubes with stationary liquid culture medium, and semi-solid culture medium) combined with two concentrations of sucrose (0 and 30 g.L-1). During the experiment the number of explants, number of shoots per explant and average length of shoots per explant were evaluated. In the process vitro establishment, immersion of B. vulgaris explants in liquid culture medium containing 1 mL.L-1 of fungicide was highlighted with the best results. In vitro multiplication, explants immersed in liquid culture medium containing 1 mL of fungicide for 120 hours showed higher number of explants, percentage of explants that emitted shoots and average number of shoots per explant. The use of a bioreactor system with culture medium supplemented with 30 g.L-1 of sucrose provided during the in vitro multiplication the lowest rate of contamination, higher survival and higher rate of explants that emitted shoots.The combination of rooting induction culture medium, composed of 1 mg.L-1 IBA, 30 g.L-1 sucrose and 7 g.L-1 agar, and use of the mini-incubator system during ex vitro rooting were Effective in the formation of adventitious rooting. The presence of activated charcoal in the culture medium, during ex vitro rooting, increased the survival rate of the clones.
id UFMT_eae07dfc397d3e0a89aaea84bfa878ac
oai_identifier_str oai:localhost:1/3127
network_acronym_str UFMT
network_name_str Repositório Institucional da UFMT
repository_id_str
spelling Micropropagação de Bambusa vulgaris visando a produção de mudas clonaisBambuCultivo in vitroFungicidaBiorreatorSacaroseCNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTALBambooIn vitro cultureFungicideBioreactorSucroseFaced with the growing demand for products derived from woody biomass, bamboo species present interesting morphological and silvicultural characteristics and stand out as an alternative for the composition of forest plantations. However, due to the difficulty of producing large scale seedlings through traditional methods, this potential has not been explored. Therefore, the objective of the present work was to contribute to the improvement of the large - scale clonal multiplication of Bambusa vulgaris by means of the micropropagation technique. In the in vitro establishment, nodal segments of B. vulgaris were inoculated in MS liquid culture medium, where the effect of different solutions of a systemic and contact fungicide (0.5 and 1.0 mL) considering different exposure times (0, 72 and 120 hours). The explants considered established were transferred to a semi-solid MS culture medium containing 3 mg.L-1 BAP to analyze the residual effect of the fungicide along subcultures during multiplication and in vitro elongation of the explants. In the second experiment, established explants of B. vulgaris were transferred to three distinct culture systems (temporary immersion bioreactor, test tubes with stationary liquid culture medium, and semi-solid culture medium) combined with two concentrations of sucrose (0 and 30 g.L-1). During the experiment the number of explants, number of shoots per explant and average length of shoots per explant were evaluated. In the process vitro establishment, immersion of B. vulgaris explants in liquid culture medium containing 1 mL.L-1 of fungicide was highlighted with the best results. In vitro multiplication, explants immersed in liquid culture medium containing 1 mL of fungicide for 120 hours showed higher number of explants, percentage of explants that emitted shoots and average number of shoots per explant. The use of a bioreactor system with culture medium supplemented with 30 g.L-1 of sucrose provided during the in vitro multiplication the lowest rate of contamination, higher survival and higher rate of explants that emitted shoots.The combination of rooting induction culture medium, composed of 1 mg.L-1 IBA, 30 g.L-1 sucrose and 7 g.L-1 agar, and use of the mini-incubator system during ex vitro rooting were Effective in the formation of adventitious rooting. The presence of activated charcoal in the culture medium, during ex vitro rooting, increased the survival rate of the clones.Frente a crescente demanda por produtos derivados de biomassa lenhosa, espécies de bambus apresentam importantes características silviculturais que as destacam como uma alternativa para a composição de plantios florestais. Entretanto, devido a dificuldade de produção de mudas em larga escala através dos métodos tradicionais, esse potencial não tem sido intensivamente explorado. Dessa forma, o objetivo do presente trabalho foi contribuir para o aperfeiçoamento da multiplicação clonal em larga escala de Bambusa vulgaris por meio da técnica de micropropagação. No estabelecimento in vitro, segmentos nodais foram inoculados em meio de cultura MS líquido, onde foi testado o efeito de diferentes soluções de um fungicida sistêmico e de contato considerando diferentes tempos de exposição. Os explantes considerados estabelecidos foram transferidos para meio de cultura MS semi-sólido contendo 3 mg.L-1 de BAP objetivando-se analisar o efeito residual do fungicida ao longo de subcultivos durante a multiplicação e o alongamento in vitro dos brotos. No segundo experimento, explantes estabelecidos foram transferidos para três sistemas distintos de cultivo (biorreator de imersão temporária, tubos de ensaio com meio de cultura líquido estacionário, e meio de cultura semi-sólido) combinados com duas concentrações de sacarose (0 e 30 g.L-1). Ao longo dos experimentos, foram avaliados a taxa de explantes contaminados, sobrevivência e oxidação, além do número de explantes, número de explantes que emitiram brotos, número de brotos por explante e comprimento médio dos brotos por explante. Durante o estabelecimento in vitro, a imersão de explantes em meio de cultura líquido contendo 1 mL de fungicida se destacou. Na multiplicação in vitro, os explantes imersos em meio de cultura líquido contendo 1 mL de fungicida durante 120 horas apresentaram maior número de explantes, porcentagem de explantes que emitiram brotos e número médio dos brotos por explante. O uso de sistema de biorreatores com meio de cultura suplementado com 30 g.L-1 de sacarose proporcionou, durante a multiplicação in vitro, a menor taxa de contaminação, maior sobrevivência e maior taxa de explantes que emitiram brotos. A combinação do meio de cultura de indução de enraizamento composto por 1 mg.L-1 de ácido indolbutírico (AIB), 30 g.L-1 de sacarose e 7 g.L-1 de ágar, e uso de sistema de mini-estufa durante o enraizamento ex vitro foram efetivos para a formação do sistema radicial. A presença de carvão ativado no meio de cultura, durante o enraizamento ex vitro, provocou aumento da taxa de sobrevivência das mudas.Universidade Federal de Mato GrossoBrasilFaculdade de Arquitetura, Engenharia e Tecnologia (FAET)UFMT CUC - CuiabáPrograma de Pós-Graduação em Ciências Florestais e AmbientaisBrondani, Gilvano EblingSilva, André Luís Lopes dahttp://lattes.cnpq.br/3531731433523168http://lattes.cnpq.br/4095993222888432Brondani, Gilvano Ebling001.861.780-85http://lattes.cnpq.br/4095993222888432Silva, André Luís Lopes da935.663.870-53http://lattes.cnpq.br/3531731433523168001.861.780-85935.663.870-53Oliveira, Leandro Silva de070.070.226-18http://lattes.cnpq.br/7112647732774200Bergonci, Tábata348.372.228-97http://lattes.cnpq.br/8056266600611595Ribeiro, Anatálya dos Santos2021-12-20T13:34:35Z2017-06-142021-12-20T13:34:35Z2017-03-20info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisRIBEIRO, Anatálya dos Santos. Micropropagação de Bambusa vulgaris visando a produção de mudas clonais. 2017. 93 f. Dissertação (Mestrado em Ciências Florestais e Ambientais) - Universidade Federal de Mato Grosso, Faculdade de Engenharia Florestal, Cuiabá, 2017.http://ri.ufmt.br/handle/1/3127porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFMTinstname:Universidade Federal de Mato Grosso (UFMT)instacron:UFMT2021-12-22T06:01:28Zoai:localhost:1/3127Repositório InstitucionalPUBhttp://ri.ufmt.br/oai/requestjordanbiblio@gmail.comopendoar:2021-12-22T06:01:28Repositório Institucional da UFMT - Universidade Federal de Mato Grosso (UFMT)false
dc.title.none.fl_str_mv Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
title Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
spellingShingle Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
Ribeiro, Anatálya dos Santos
Bambu
Cultivo in vitro
Fungicida
Biorreator
Sacarose
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
Bamboo
In vitro culture
Fungicide
Bioreactor
Sucrose
title_short Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
title_full Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
title_fullStr Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
title_full_unstemmed Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
title_sort Micropropagação de Bambusa vulgaris visando a produção de mudas clonais
author Ribeiro, Anatálya dos Santos
author_facet Ribeiro, Anatálya dos Santos
author_role author
dc.contributor.none.fl_str_mv Brondani, Gilvano Ebling
Silva, André Luís Lopes da
http://lattes.cnpq.br/3531731433523168
http://lattes.cnpq.br/4095993222888432
Brondani, Gilvano Ebling
001.861.780-85
http://lattes.cnpq.br/4095993222888432
Silva, André Luís Lopes da
935.663.870-53
http://lattes.cnpq.br/3531731433523168
001.861.780-85
935.663.870-53
Oliveira, Leandro Silva de
070.070.226-18
http://lattes.cnpq.br/7112647732774200
Bergonci, Tábata
348.372.228-97
http://lattes.cnpq.br/8056266600611595
dc.contributor.author.fl_str_mv Ribeiro, Anatálya dos Santos
dc.subject.por.fl_str_mv Bambu
Cultivo in vitro
Fungicida
Biorreator
Sacarose
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
Bamboo
In vitro culture
Fungicide
Bioreactor
Sucrose
topic Bambu
Cultivo in vitro
Fungicida
Biorreator
Sacarose
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL
Bamboo
In vitro culture
Fungicide
Bioreactor
Sucrose
description Faced with the growing demand for products derived from woody biomass, bamboo species present interesting morphological and silvicultural characteristics and stand out as an alternative for the composition of forest plantations. However, due to the difficulty of producing large scale seedlings through traditional methods, this potential has not been explored. Therefore, the objective of the present work was to contribute to the improvement of the large - scale clonal multiplication of Bambusa vulgaris by means of the micropropagation technique. In the in vitro establishment, nodal segments of B. vulgaris were inoculated in MS liquid culture medium, where the effect of different solutions of a systemic and contact fungicide (0.5 and 1.0 mL) considering different exposure times (0, 72 and 120 hours). The explants considered established were transferred to a semi-solid MS culture medium containing 3 mg.L-1 BAP to analyze the residual effect of the fungicide along subcultures during multiplication and in vitro elongation of the explants. In the second experiment, established explants of B. vulgaris were transferred to three distinct culture systems (temporary immersion bioreactor, test tubes with stationary liquid culture medium, and semi-solid culture medium) combined with two concentrations of sucrose (0 and 30 g.L-1). During the experiment the number of explants, number of shoots per explant and average length of shoots per explant were evaluated. In the process vitro establishment, immersion of B. vulgaris explants in liquid culture medium containing 1 mL.L-1 of fungicide was highlighted with the best results. In vitro multiplication, explants immersed in liquid culture medium containing 1 mL of fungicide for 120 hours showed higher number of explants, percentage of explants that emitted shoots and average number of shoots per explant. The use of a bioreactor system with culture medium supplemented with 30 g.L-1 of sucrose provided during the in vitro multiplication the lowest rate of contamination, higher survival and higher rate of explants that emitted shoots.The combination of rooting induction culture medium, composed of 1 mg.L-1 IBA, 30 g.L-1 sucrose and 7 g.L-1 agar, and use of the mini-incubator system during ex vitro rooting were Effective in the formation of adventitious rooting. The presence of activated charcoal in the culture medium, during ex vitro rooting, increased the survival rate of the clones.
publishDate 2017
dc.date.none.fl_str_mv 2017-06-14
2017-03-20
2021-12-20T13:34:35Z
2021-12-20T13:34:35Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv RIBEIRO, Anatálya dos Santos. Micropropagação de Bambusa vulgaris visando a produção de mudas clonais. 2017. 93 f. Dissertação (Mestrado em Ciências Florestais e Ambientais) - Universidade Federal de Mato Grosso, Faculdade de Engenharia Florestal, Cuiabá, 2017.
http://ri.ufmt.br/handle/1/3127
identifier_str_mv RIBEIRO, Anatálya dos Santos. Micropropagação de Bambusa vulgaris visando a produção de mudas clonais. 2017. 93 f. Dissertação (Mestrado em Ciências Florestais e Ambientais) - Universidade Federal de Mato Grosso, Faculdade de Engenharia Florestal, Cuiabá, 2017.
url http://ri.ufmt.br/handle/1/3127
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.publisher.none.fl_str_mv Universidade Federal de Mato Grosso
Brasil
Faculdade de Arquitetura, Engenharia e Tecnologia (FAET)
UFMT CUC - Cuiabá
Programa de Pós-Graduação em Ciências Florestais e Ambientais
publisher.none.fl_str_mv Universidade Federal de Mato Grosso
Brasil
Faculdade de Arquitetura, Engenharia e Tecnologia (FAET)
UFMT CUC - Cuiabá
Programa de Pós-Graduação em Ciências Florestais e Ambientais
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFMT
instname:Universidade Federal de Mato Grosso (UFMT)
instacron:UFMT
instname_str Universidade Federal de Mato Grosso (UFMT)
instacron_str UFMT
institution UFMT
reponame_str Repositório Institucional da UFMT
collection Repositório Institucional da UFMT
repository.name.fl_str_mv Repositório Institucional da UFMT - Universidade Federal de Mato Grosso (UFMT)
repository.mail.fl_str_mv jordanbiblio@gmail.com
_version_ 1804648511575162880