Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UFPB |
Texto Completo: | https://repositorio.ufpb.br/jspui/handle/tede/5357 |
Resumo: | Activated carbon, AC, is a pure state carbon with large porosity, which adsorbs molecules or ions from a fluid medium. In general, it is obtained from the controlled burning of agricultural or industrial by-products. When produced in conventional furnaces, the operating temperatures may rise up to 900°C, resulting in yields inferior to 20 %. The low yield is a consequence of the precursor's large thermal degradation caused by the heat wave front which moves slowly from the surface to its core. Therefore, there is a significant formation of meso and macropores, which lead to a final value of density, ρ, below of 0.5 g.cm-3. On the other hand, thermal degradation caused by microwaves is less aggressive. The heating process occurs from the core of the precursor to its exterior. As a consequence the activated carbons are denser, have a more selective microporosity, and are more suitable to gas storage. This paper reports the preparation and the results of the qualitative analysis of physically and chemically activated carbons, from coconut shell, using an adapted microwave oven. This adapted microwave allows the settling down of temperature programs' ramp and heating rates. The BET surface area of activated carbons prepared in the microwave oven surpassed 1200 m2.g-1, the apparent density situated at around 0.5 g.cm-3, and the yields remained above 40 %. Comparisons between the electricity consumption of the electrical conventional kiln and of the micro-wave oven in producing a certain quantity of an activated carbon with a BET surface area over 800 m2/g, showed that the use of the microwave oven had allowed, each time, a reduction of about 3,2 kW.h, which represents an average of electricity saving of 85.5 %. |
id |
UFPB_cc136bc2721359099824bbce26df57ea |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/5357 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondasMicro-ondasEndocarpo de CocoCarvão AtivadoMicrowaveCoconut ShellActivated CarbonCNPQ::ENGENHARIAS::ENGENHARIA MECANICAActivated carbon, AC, is a pure state carbon with large porosity, which adsorbs molecules or ions from a fluid medium. In general, it is obtained from the controlled burning of agricultural or industrial by-products. When produced in conventional furnaces, the operating temperatures may rise up to 900°C, resulting in yields inferior to 20 %. The low yield is a consequence of the precursor's large thermal degradation caused by the heat wave front which moves slowly from the surface to its core. Therefore, there is a significant formation of meso and macropores, which lead to a final value of density, ρ, below of 0.5 g.cm-3. On the other hand, thermal degradation caused by microwaves is less aggressive. The heating process occurs from the core of the precursor to its exterior. As a consequence the activated carbons are denser, have a more selective microporosity, and are more suitable to gas storage. This paper reports the preparation and the results of the qualitative analysis of physically and chemically activated carbons, from coconut shell, using an adapted microwave oven. This adapted microwave allows the settling down of temperature programs' ramp and heating rates. The BET surface area of activated carbons prepared in the microwave oven surpassed 1200 m2.g-1, the apparent density situated at around 0.5 g.cm-3, and the yields remained above 40 %. Comparisons between the electricity consumption of the electrical conventional kiln and of the micro-wave oven in producing a certain quantity of an activated carbon with a BET surface area over 800 m2/g, showed that the use of the microwave oven had allowed, each time, a reduction of about 3,2 kW.h, which represents an average of electricity saving of 85.5 %.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorCarvão ativado, CA, é uma forma de carbono puro de grande porosidade, que adsorve moléculas ou íons de um meio fluido. É obtido a partir da queima controlada de precursores, geralmente, subprodutos de baixo custo, oriundos da agricultura, ou da indústria. Quando produzido em fornos convencionais, as temperaturas de trabalho podem ser superiores a 900 °C, reduzindo a menos de 20 % a massa de carvão produzida com relação à do precursor (rendimento). Isto se dá em virtude da grande degradação ocasionada pela frente de calor destes fornos, que lentamente se desloca da superfície ao núcleo da massa do precursor. Em consequência, via de regra, a massa específica final, ρ, registra valores abaixo de 0,5 g.cm-3. No caso das micro-ondas a degradação térmica da matéria se dá, de forma menos agressiva, do interior do precursor para o exterior, proporcionando carvões ativados mais densos, com microporosidade mais seletiva, e, logo, mais adequada ao armazenamento de gás. O presente trabalho relata a obtenção de carvões ativados, por via física e química, a partir do endocarpo do coco da baía, em um forno micro-ondas adaptado, onde é possível se programar rampas de temperaturas e razões de aquecimento. Avalia-se o consumo de energia elétrica do forno micro-ondas adaptado em relação ao do forno elétrico convencional. A área superficial de BET dos carvões química e fisicamente preparados foi superior a 1200 m2.g-1, a massa específica manteve-se próximo a 0,5 g.cm-3, e os rendimentos ficaram acima de 40 %. Ao se comparar o consumo de energia elétrica para produzir, tanto no forno convencional como no micro-ondas, uma determinada quantidade de carvão ativado, com área de BET superior a 800 m2/g, verificou-se que a redução gerada pelo micro-ondas foi de aproximadamente 3,2 kW.h, representando um percentual de economia de energia de 85,5 %.Universidade Federal da ParaíbaBREngenharia MecânicaPrograma de Pós Graduação em Engenharia MecânicaUFPBJaguaribe, Emerson Freitashttp://lattes.cnpq.br/1453322235984692Bezerra, Alexandre Freire2015-05-08T14:59:48Z2018-07-21T00:03:36Z2014-06-102018-07-21T00:03:36Z2012-09-21info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfBEZERRA, Alexandre Freire. Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas. 2012. 68 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2012.https://repositorio.ufpb.br/jspui/handle/tede/5357porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2018-09-06T00:45:14Zoai:repositorio.ufpb.br:tede/5357Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2018-09-06T00:45:14Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
title |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
spellingShingle |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas Bezerra, Alexandre Freire Micro-ondas Endocarpo de Coco Carvão Ativado Microwave Coconut Shell Activated Carbon CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
title_full |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
title_fullStr |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
title_full_unstemmed |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
title_sort |
Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas |
author |
Bezerra, Alexandre Freire |
author_facet |
Bezerra, Alexandre Freire |
author_role |
author |
dc.contributor.none.fl_str_mv |
Jaguaribe, Emerson Freitas http://lattes.cnpq.br/1453322235984692 |
dc.contributor.author.fl_str_mv |
Bezerra, Alexandre Freire |
dc.subject.por.fl_str_mv |
Micro-ondas Endocarpo de Coco Carvão Ativado Microwave Coconut Shell Activated Carbon CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Micro-ondas Endocarpo de Coco Carvão Ativado Microwave Coconut Shell Activated Carbon CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
Activated carbon, AC, is a pure state carbon with large porosity, which adsorbs molecules or ions from a fluid medium. In general, it is obtained from the controlled burning of agricultural or industrial by-products. When produced in conventional furnaces, the operating temperatures may rise up to 900°C, resulting in yields inferior to 20 %. The low yield is a consequence of the precursor's large thermal degradation caused by the heat wave front which moves slowly from the surface to its core. Therefore, there is a significant formation of meso and macropores, which lead to a final value of density, ρ, below of 0.5 g.cm-3. On the other hand, thermal degradation caused by microwaves is less aggressive. The heating process occurs from the core of the precursor to its exterior. As a consequence the activated carbons are denser, have a more selective microporosity, and are more suitable to gas storage. This paper reports the preparation and the results of the qualitative analysis of physically and chemically activated carbons, from coconut shell, using an adapted microwave oven. This adapted microwave allows the settling down of temperature programs' ramp and heating rates. The BET surface area of activated carbons prepared in the microwave oven surpassed 1200 m2.g-1, the apparent density situated at around 0.5 g.cm-3, and the yields remained above 40 %. Comparisons between the electricity consumption of the electrical conventional kiln and of the micro-wave oven in producing a certain quantity of an activated carbon with a BET surface area over 800 m2/g, showed that the use of the microwave oven had allowed, each time, a reduction of about 3,2 kW.h, which represents an average of electricity saving of 85.5 %. |
publishDate |
2012 |
dc.date.none.fl_str_mv |
2012-09-21 2014-06-10 2015-05-08T14:59:48Z 2018-07-21T00:03:36Z 2018-07-21T00:03:36Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
BEZERRA, Alexandre Freire. Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas. 2012. 68 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2012. https://repositorio.ufpb.br/jspui/handle/tede/5357 |
identifier_str_mv |
BEZERRA, Alexandre Freire. Carvão ativado de endocarpo de Coco da Baía produzido em forno micro-ondas. 2012. 68 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2012. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/5357 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós Graduação em Engenharia Mecânica UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós Graduação em Engenharia Mecânica UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1823126912115933184 |