Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2007 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFPel - Guaiaca |
Texto Completo: | http://guaiaca.ufpel.edu.br/handle/123456789/1248 |
Resumo: | Xanthan yield and physical and chemical characteristics can be improved by modification in culture conditions, as well as, by post-fermentation treatments in order to obtain a xanthan with the required characteristics. The aim of this work was to study the operational conditions in xanthan production by Xanthomonas arborícola pv pruni strains 106 and 115 to be used in oilwell drilling fluids. The influence of thermal treatment applied to the fermentation broth was evaluated in the xanthan produced by strain 106 in a range of pH and stirrer speed. The thermal treatment decreased the yield between 5.8 and 14%, nevertheless, was observed increase of aqueous solution and fermentation broth viscosities. The aggregation of xanthan molecules caused by thermal treatment and determined by increase of molar mass was dependent on the sodium content. As a result, a correlation between molar mass and xanthan solution viscosity can be observed. The fermentation broth sterilization was adopted for experiment in which a pre-selection of production medium in orbital shaker was performed for subsequent pH, production medium and stirrer speed study in fermentor by strains 106 and 115. Xanthan production and viscosity was dependent on the strain of X. arborícola pv pruni and on the operational condition used. The production medium B showed the best balance of yield and viscosity results, in orbital shaker, as well as in fermentor. The best results for both strains were obtained at pH 7, 600 rpm and 66 h of fermentation. The two strains showed potential for xanthan production. In an evaluation study of, physical and chemical characteristics, the xanthan produced by strain 115 was compared to the characteristics of the commercial xanthans, Roeper and Kelzan. The former is for application in food, pharmeceutical products and cosmetics and the latter for application in oilwell drilling fluids. The results were within the literature specified patterns, except by the low piruvate content of xanthan produced by strain 115, low monovalent salt content of Roeper sample and high divalent salt content of both commercial samples. The xanthans produced by X. arborícola pv pruni were evaluated as viscosifying fluid for use in oilwell drilling, in comparison to Duo Vis, Kelzan and Xanvis commercial brands. As a whole, the results obtained in this study show that the commercial polymers are more efficient when used in aqueous solution, since these polymers contain high salt concentrations. Xanthans produced by patovar pruni, Xc 106 600 and Xc 115 600, as having low salt concentration, they show potential for application in oilwell drilling fluid, when a salt solution was used, similar to the conditions of marine exploration. |
id |
UFPL_9ce4139cd615e9a51dc819909d61a573 |
---|---|
oai_identifier_str |
oai:guaiaca.ufpel.edu.br:123456789/1248 |
network_acronym_str |
UFPL |
network_name_str |
Repositório Institucional da UFPel - Guaiaca |
repository_id_str |
|
spelling |
2014-08-20T13:32:51Z2008-04-042014-08-20T13:32:51Z2007-10-16BORGES, Caroline Dellinghausen. Study of operational conditions in xanthan production by Xanthomonas arboricola pv pruni for oilwell drilling fluid. 2007. 121 f. Tese (Doutorado em Biotecnologia) - Universidade Federal de Pelotas, Pelotas, 2007.http://guaiaca.ufpel.edu.br/handle/123456789/1248Xanthan yield and physical and chemical characteristics can be improved by modification in culture conditions, as well as, by post-fermentation treatments in order to obtain a xanthan with the required characteristics. The aim of this work was to study the operational conditions in xanthan production by Xanthomonas arborícola pv pruni strains 106 and 115 to be used in oilwell drilling fluids. The influence of thermal treatment applied to the fermentation broth was evaluated in the xanthan produced by strain 106 in a range of pH and stirrer speed. The thermal treatment decreased the yield between 5.8 and 14%, nevertheless, was observed increase of aqueous solution and fermentation broth viscosities. The aggregation of xanthan molecules caused by thermal treatment and determined by increase of molar mass was dependent on the sodium content. As a result, a correlation between molar mass and xanthan solution viscosity can be observed. The fermentation broth sterilization was adopted for experiment in which a pre-selection of production medium in orbital shaker was performed for subsequent pH, production medium and stirrer speed study in fermentor by strains 106 and 115. Xanthan production and viscosity was dependent on the strain of X. arborícola pv pruni and on the operational condition used. The production medium B showed the best balance of yield and viscosity results, in orbital shaker, as well as in fermentor. The best results for both strains were obtained at pH 7, 600 rpm and 66 h of fermentation. The two strains showed potential for xanthan production. In an evaluation study of, physical and chemical characteristics, the xanthan produced by strain 115 was compared to the characteristics of the commercial xanthans, Roeper and Kelzan. The former is for application in food, pharmeceutical products and cosmetics and the latter for application in oilwell drilling fluids. The results were within the literature specified patterns, except by the low piruvate content of xanthan produced by strain 115, low monovalent salt content of Roeper sample and high divalent salt content of both commercial samples. The xanthans produced by X. arborícola pv pruni were evaluated as viscosifying fluid for use in oilwell drilling, in comparison to Duo Vis, Kelzan and Xanvis commercial brands. As a whole, the results obtained in this study show that the commercial polymers are more efficient when used in aqueous solution, since these polymers contain high salt concentrations. Xanthans produced by patovar pruni, Xc 106 600 and Xc 115 600, as having low salt concentration, they show potential for application in oilwell drilling fluid, when a salt solution was used, similar to the conditions of marine exploration.O rendimento e as características físicas e químicas da xantana podem ser melhorados através das modificações nas condições de cultivo, assim como, por tratamentos empregados após a fermentação, para a obtenção de uma xantana com características desejadas para o fim que se propõe. O trabalho objetivou estudar as condições operacionais de produção de xantana por Xanthomonas arboricola pv pruni cepas 106 e 115 para aplicação em fluidos de perfuração de poços de petróleo. A influência do tratamento térmico aplicado no caldo fermentado foi avaliada na xantana produzida pela cepa 106 em diferentes condições de pH e velocidade de agitação. O tratamento térmico reduziu o rendimento entre 5,8 e 14%, entretanto, foi observado o aumento da viscosidade da solução aquosa e do caldo fermentado. A agregação de moléculas de xantana provocada pelo tratamento térmico, e comprovada pelo aumento da massa molar foi dependente da concentração de sódio. Como resultado pode ser observada relação entre a massa molar e a viscosidade da solução de xantana. A esterilização do caldo fermentado foi adotada para o experimento posterior, em que foi realizada uma pré-seleção de meios de produção, em agitador incubador, para posterior estudo de pH, meio de produção e velocidade de agitação em fermentador pelas cepas 106 e 115. A produção e a viscosidade das xantanas sintetizadas foram dependentes da cepa de X. arboricola pv pruni e das condições operacionais. O meio de produção B apresentou o melhor equilíbrio entre produção e viscosidade, em agitador incubador, assim como no fermentador. Os melhores resultados para ambas as cepas foram obtidos em pH 7, 600 rpm e 66 h de fermentação. As duas cepas apresentaram potencial para serem utilizadas na produção de xantana. No estudo da avaliação das características físicas e químicas, a xantana produzida pela cepa 115 foi comparada as características das xantanas comerciais, Roeper e Kelzan. A primeira, para aplicação em alimentos, produtos farmacêuticos e cosméticos e a segunda, para aplicação em fluido de perfuração de poços de petróleo. Os resultados apresentaram-se dentro dos padrões especificados pela literatura, exceto pelo baixo conteúdo de piruvato da xantana produzida pela cepa 115, baixo conteúdo de sais monovalentes da amostra Roeper e alto conteúdo de sais divalentes das duas amostras comerciais. As xantanas produzidas por X. arboricola pv pruni foram avaliadas como viscosificante de fluido para aplicação na perfuração de poços de petróleo, comparando-as com amostras comerciais: Duo Vis, Kelzan e Xanvis. De uma forma geral, os resultados obtidos neste estudo mostram que os polímeros comerciais apresentaram maior eficiência quando preparados em solução aquosa, pois estes polímeros continham alta concentração de sais. Já as xantanas produzidas pelo patovar pruni, Xc 106 600 e Xc 115 600, por apresentarem baixa concentração de sais, apresentaram potencial para aplicação em fluido de perfuração de poços de petróleo, quando preparados em solução salina, condição semelhante a utilizada na exploração marítima.application/pdfporUniversidade Federal de PelotasPrograma de Pós-Graduação em BiotecnologiaUFPelBRBiotecnologiaXanthomonas arboricola pv pruniXanthanOperational conditionsIndustrial microbiologyBiotechnologyBiotecnologiaMicrobiologia industrialFermentaçãoXanthomonas arborícola pv pruniXantanaCondições operacionaisCNPQ::CIENCIAS BIOLOGICAS::FARMACOLOGIA::FARMACOLOGIA GERAL::BIODISPONIBILIDADEEstudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleoStudy of operational conditions in xanthan production by Xanthomonas arboricola pv pruni for oilwell drilling fluidinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesishttp://lattes.cnpq.br/6109492043515016http://lattes.cnpq.br/8569203272232467Vendruscolo, Claire TondoBorges, Caroline Dellinghauseninfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFPel - Guaiacainstname:Universidade Federal de Pelotas (UFPEL)instacron:UFPELORIGINALficha_de_caroline_borges_biotecnologia.pdfapplication/pdf7018http://guaiaca.ufpel.edu.br/xmlui/bitstream/123456789/1248/1/ficha_de_caroline_borges_biotecnologia.pdfb335f912cae89a687603fa35c4e44d7dMD51open accessTEXTficha_de_caroline_borges_biotecnologia.pdf.txtficha_de_caroline_borges_biotecnologia.pdf.txtExtracted Texttext/plain754http://guaiaca.ufpel.edu.br/xmlui/bitstream/123456789/1248/2/ficha_de_caroline_borges_biotecnologia.pdf.txt25d013a1272ed6f31afb8e81a60455f7MD52open accessTHUMBNAILficha_de_caroline_borges_biotecnologia.pdf.jpgficha_de_caroline_borges_biotecnologia.pdf.jpgGenerated Thumbnailimage/jpeg1271http://guaiaca.ufpel.edu.br/xmlui/bitstream/123456789/1248/3/ficha_de_caroline_borges_biotecnologia.pdf.jpg46f8815423c20f88f6d546e376e756b0MD53open access123456789/12482019-08-23 10:21:01.21open accessoai:guaiaca.ufpel.edu.br:123456789/1248Repositório InstitucionalPUBhttp://repositorio.ufpel.edu.br/oai/requestrippel@ufpel.edu.br || repositorio@ufpel.edu.br || aline.batista@ufpel.edu.bropendoar:2019-08-23T13:21:01Repositório Institucional da UFPel - Guaiaca - Universidade Federal de Pelotas (UFPEL)false |
dc.title.por.fl_str_mv |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
dc.title.alternative.eng.fl_str_mv |
Study of operational conditions in xanthan production by Xanthomonas arboricola pv pruni for oilwell drilling fluid |
title |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
spellingShingle |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo Borges, Caroline Dellinghausen Xanthomonas arboricola pv pruni Xanthan Operational conditions Industrial microbiology Biotechnology Biotecnologia Microbiologia industrial Fermentação Xanthomonas arborícola pv pruni Xantana Condições operacionais CNPQ::CIENCIAS BIOLOGICAS::FARMACOLOGIA::FARMACOLOGIA GERAL::BIODISPONIBILIDADE |
title_short |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
title_full |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
title_fullStr |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
title_full_unstemmed |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
title_sort |
Estudo das condições operacionais na produção de xan-tana por X. arboricola pv pruni para aplicação em fluido de perfuração de poços de petróleo |
author |
Borges, Caroline Dellinghausen |
author_facet |
Borges, Caroline Dellinghausen |
author_role |
author |
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/6109492043515016 |
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/8569203272232467 |
dc.contributor.advisor1.fl_str_mv |
Vendruscolo, Claire Tondo |
dc.contributor.author.fl_str_mv |
Borges, Caroline Dellinghausen |
contributor_str_mv |
Vendruscolo, Claire Tondo |
dc.subject.eng.fl_str_mv |
Xanthomonas arboricola pv pruni Xanthan Operational conditions Industrial microbiology Biotechnology |
topic |
Xanthomonas arboricola pv pruni Xanthan Operational conditions Industrial microbiology Biotechnology Biotecnologia Microbiologia industrial Fermentação Xanthomonas arborícola pv pruni Xantana Condições operacionais CNPQ::CIENCIAS BIOLOGICAS::FARMACOLOGIA::FARMACOLOGIA GERAL::BIODISPONIBILIDADE |
dc.subject.por.fl_str_mv |
Biotecnologia Microbiologia industrial Fermentação Xanthomonas arborícola pv pruni Xantana Condições operacionais |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS BIOLOGICAS::FARMACOLOGIA::FARMACOLOGIA GERAL::BIODISPONIBILIDADE |
description |
Xanthan yield and physical and chemical characteristics can be improved by modification in culture conditions, as well as, by post-fermentation treatments in order to obtain a xanthan with the required characteristics. The aim of this work was to study the operational conditions in xanthan production by Xanthomonas arborícola pv pruni strains 106 and 115 to be used in oilwell drilling fluids. The influence of thermal treatment applied to the fermentation broth was evaluated in the xanthan produced by strain 106 in a range of pH and stirrer speed. The thermal treatment decreased the yield between 5.8 and 14%, nevertheless, was observed increase of aqueous solution and fermentation broth viscosities. The aggregation of xanthan molecules caused by thermal treatment and determined by increase of molar mass was dependent on the sodium content. As a result, a correlation between molar mass and xanthan solution viscosity can be observed. The fermentation broth sterilization was adopted for experiment in which a pre-selection of production medium in orbital shaker was performed for subsequent pH, production medium and stirrer speed study in fermentor by strains 106 and 115. Xanthan production and viscosity was dependent on the strain of X. arborícola pv pruni and on the operational condition used. The production medium B showed the best balance of yield and viscosity results, in orbital shaker, as well as in fermentor. The best results for both strains were obtained at pH 7, 600 rpm and 66 h of fermentation. The two strains showed potential for xanthan production. In an evaluation study of, physical and chemical characteristics, the xanthan produced by strain 115 was compared to the characteristics of the commercial xanthans, Roeper and Kelzan. The former is for application in food, pharmeceutical products and cosmetics and the latter for application in oilwell drilling fluids. The results were within the literature specified patterns, except by the low piruvate content of xanthan produced by strain 115, low monovalent salt content of Roeper sample and high divalent salt content of both commercial samples. The xanthans produced by X. arborícola pv pruni were evaluated as viscosifying fluid for use in oilwell drilling, in comparison to Duo Vis, Kelzan and Xanvis commercial brands. As a whole, the results obtained in this study show that the commercial polymers are more efficient when used in aqueous solution, since these polymers contain high salt concentrations. Xanthans produced by patovar pruni, Xc 106 600 and Xc 115 600, as having low salt concentration, they show potential for application in oilwell drilling fluid, when a salt solution was used, similar to the conditions of marine exploration. |
publishDate |
2007 |
dc.date.issued.fl_str_mv |
2007-10-16 |
dc.date.available.fl_str_mv |
2008-04-04 2014-08-20T13:32:51Z |
dc.date.accessioned.fl_str_mv |
2014-08-20T13:32:51Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
BORGES, Caroline Dellinghausen. Study of operational conditions in xanthan production by Xanthomonas arboricola pv pruni for oilwell drilling fluid. 2007. 121 f. Tese (Doutorado em Biotecnologia) - Universidade Federal de Pelotas, Pelotas, 2007. |
dc.identifier.uri.fl_str_mv |
http://guaiaca.ufpel.edu.br/handle/123456789/1248 |
identifier_str_mv |
BORGES, Caroline Dellinghausen. Study of operational conditions in xanthan production by Xanthomonas arboricola pv pruni for oilwell drilling fluid. 2007. 121 f. Tese (Doutorado em Biotecnologia) - Universidade Federal de Pelotas, Pelotas, 2007. |
url |
http://guaiaca.ufpel.edu.br/handle/123456789/1248 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Pelotas |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Biotecnologia |
dc.publisher.initials.fl_str_mv |
UFPel |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Biotecnologia |
publisher.none.fl_str_mv |
Universidade Federal de Pelotas |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFPel - Guaiaca instname:Universidade Federal de Pelotas (UFPEL) instacron:UFPEL |
instname_str |
Universidade Federal de Pelotas (UFPEL) |
instacron_str |
UFPEL |
institution |
UFPEL |
reponame_str |
Repositório Institucional da UFPel - Guaiaca |
collection |
Repositório Institucional da UFPel - Guaiaca |
bitstream.url.fl_str_mv |
http://guaiaca.ufpel.edu.br/xmlui/bitstream/123456789/1248/1/ficha_de_caroline_borges_biotecnologia.pdf http://guaiaca.ufpel.edu.br/xmlui/bitstream/123456789/1248/2/ficha_de_caroline_borges_biotecnologia.pdf.txt http://guaiaca.ufpel.edu.br/xmlui/bitstream/123456789/1248/3/ficha_de_caroline_borges_biotecnologia.pdf.jpg |
bitstream.checksum.fl_str_mv |
b335f912cae89a687603fa35c4e44d7d 25d013a1272ed6f31afb8e81a60455f7 46f8815423c20f88f6d546e376e756b0 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFPel - Guaiaca - Universidade Federal de Pelotas (UFPEL) |
repository.mail.fl_str_mv |
rippel@ufpel.edu.br || repositorio@ufpel.edu.br || aline.batista@ufpel.edu.br |
_version_ |
1801846923133452288 |