Aplicação de FMEA na otimização dos fatores de produção da cultura da canola

Detalhes bibliográficos
Autor(a) principal: Garrafa, Marcos
Data de Publicação: 2005
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Biblioteca Digital de Teses e Dissertações do UFSM
Texto Completo: http://repositorio.ufsm.br/handle/1/8009
Resumo: Objectifying to verify if the use of Mode Analysis and Potencial Fail Effect, FMEA, makes possible to potentialize agricultures cultivation processes, reflecting in a higher profit to the cultures, it was applied this tool in a Canola farming in the Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. The project started with the FMEA Team composition, which analyzed the possible fails to cause culture profit reduction, organizing the main modes and effects of fail. Through of a graphical approach, applied to the severity and occurrence of related fail modes, it was determined those with priority of attention, as well as its possible seriously effects. These modes were submitted to an investigation matrix of common fails and detected the key causes, which received a preventive actions plan. To determine the influence of the foreseen actions in the culture profit, two areas of Canola cultivation were seeded in a field, once that just one of them was used FMEA. The culture submitted to the FMEA was differed for receiving conference from the regulation from the machine for plant the field and supplement from nitrogen in in agreement covering interpretation from the result from the analysis of soil. Each one of the cultures was sampled in 32 items, with gauging of the number of plants, spacing among them, number of pod and profit. The collected data were treated statically, informing that the culture which received the FMEA implementation presented better plants density, better plants distribution in the seeded area, maturation more uniform and profit 11,83% superior.
id UFSM_0edc7219cfc845a7069346edf19c2dcd
oai_identifier_str oai:repositorio.ufsm.br:1/8009
network_acronym_str UFSM
network_name_str Biblioteca Digital de Teses e Dissertações do UFSM
repository_id_str
spelling 2008-10-292008-10-292005-01-21GARRAFA, Marcos. IMPLEMENTATION OF FMEA IN THE OPTIMIZATION OF CANOLA PRODUCTION FACTORS. 2005. 183 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal de Santa Maria, Santa Maria, 2005.http://repositorio.ufsm.br/handle/1/8009Objectifying to verify if the use of Mode Analysis and Potencial Fail Effect, FMEA, makes possible to potentialize agricultures cultivation processes, reflecting in a higher profit to the cultures, it was applied this tool in a Canola farming in the Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. The project started with the FMEA Team composition, which analyzed the possible fails to cause culture profit reduction, organizing the main modes and effects of fail. Through of a graphical approach, applied to the severity and occurrence of related fail modes, it was determined those with priority of attention, as well as its possible seriously effects. These modes were submitted to an investigation matrix of common fails and detected the key causes, which received a preventive actions plan. To determine the influence of the foreseen actions in the culture profit, two areas of Canola cultivation were seeded in a field, once that just one of them was used FMEA. The culture submitted to the FMEA was differed for receiving conference from the regulation from the machine for plant the field and supplement from nitrogen in in agreement covering interpretation from the result from the analysis of soil. Each one of the cultures was sampled in 32 items, with gauging of the number of plants, spacing among them, number of pod and profit. The collected data were treated statically, informing that the culture which received the FMEA implementation presented better plants density, better plants distribution in the seeded area, maturation more uniform and profit 11,83% superior.Objetivando verificar se o emprego da Análise de Modo e Efeito de Falha Potencial, FMEA, possibilita potencializar processos de cultivos agrícolas, refletindo em maior rendimento às culturas, aplicou-se esta ferramenta em uma lavoura de canola na Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. O trabalho iniciou com a constituição da Equipe FMEA, a qual arrolou as falhas possíveis de causar diminuição no rendimento da cultura, estruturando os modos e efeitos principais de falha. Através de uma abordagem gráfica, aplicada à severidade e à ocorrência dos modos de falha relacionados, foram definidos àqueles prioritários de atenção, bem como seus possíveis efeitos mais graves. Estes modos foram submetidos a uma matriz de investigação de falhas comuns e, detectadas as causas-chave, estas receberam um plano de ações preventivas. Para determinar a influência das ações previstas no rendimento da cultura, foram instaladas duas áreas de cultivo de canola a campo, uma com aplicação de FMEA e outra, sem. O cultivo submetido à FMEA diferiu-se por receber conferência da regulagem da semeadeira a campo e suplementação de nitrogênio em cobertura conforme interpretação do resultado da análise de solo. Cada um dos cultivos foi amostrado em 32 pontos, com aferição do número de plantas, espaçamento entre elas, número de síliquas e rendimento. Os dados coletados foram tratados estaticamente, explicitando que o cultivo que recebeu a aplicação da FMEA apresentou melhor densidade de plantas, melhor distribuição das plantas na área de cultivo, maturação mais uniforme e rendimento 11,83 % superior.application/pdfporUniversidade Federal de Santa MariaPrograma de Pós-Graduação em Engenharia de ProduçãoUFSMBREngenharia de ProduçãoEngenharia de produçãoControle de qualidadeAnálise de falhasFMEACanolaAgriculturaCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOAplicação de FMEA na otimização dos fatores de produção da cultura da canolaImplementation of FMEA in the optimization of canola production factorsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisRosa, Leandro Cantorski dahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783888E6Dallmeyer, Arno Udohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783144H2Ruppenthal, Janis Elisahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4700407J6http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4734656Z7Garrafa, Marcos300800000005400300300500300f696044a-45b8-4eff-90fb-0f94743c76744226700d-9b54-48ae-bf77-5c005189027ab7ee0acb-1024-41f9-88f7-85310134a6ed65ffd02f-673b-4571-ae6d-f74866b4a0b8info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMORIGINALMARCOS GARRAFA.pdfapplication/pdf1045497http://repositorio.ufsm.br/bitstream/1/8009/1/MARCOS%20GARRAFA.pdf3e4d6713dd48f01c9c1be858aa94bf1bMD51TEXTMARCOS GARRAFA.pdf.txtMARCOS GARRAFA.pdf.txtExtracted texttext/plain345592http://repositorio.ufsm.br/bitstream/1/8009/2/MARCOS%20GARRAFA.pdf.txt1bd50783df0a7331b17daa51cb8c5518MD52THUMBNAILMARCOS GARRAFA.pdf.jpgMARCOS GARRAFA.pdf.jpgIM Thumbnailimage/jpeg5602http://repositorio.ufsm.br/bitstream/1/8009/3/MARCOS%20GARRAFA.pdf.jpg4949a20abb746069041e48d0871ec2faMD531/80092022-06-30 08:36:40.842oai:repositorio.ufsm.br:1/8009Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-06-30T11:36:40Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM)false
dc.title.por.fl_str_mv Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
dc.title.alternative.eng.fl_str_mv Implementation of FMEA in the optimization of canola production factors
title Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
spellingShingle Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
Garrafa, Marcos
Engenharia de produção
Controle de qualidade
Análise de falhas
FMEA
Canola
Agricultura
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
title_short Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
title_full Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
title_fullStr Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
title_full_unstemmed Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
title_sort Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
author Garrafa, Marcos
author_facet Garrafa, Marcos
author_role author
dc.contributor.advisor1.fl_str_mv Rosa, Leandro Cantorski da
dc.contributor.advisor1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783888E6
dc.contributor.referee1.fl_str_mv Dallmeyer, Arno Udo
dc.contributor.referee1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783144H2
dc.contributor.referee2.fl_str_mv Ruppenthal, Janis Elisa
dc.contributor.referee2Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4700407J6
dc.contributor.authorLattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4734656Z7
dc.contributor.author.fl_str_mv Garrafa, Marcos
contributor_str_mv Rosa, Leandro Cantorski da
Dallmeyer, Arno Udo
Ruppenthal, Janis Elisa
dc.subject.por.fl_str_mv Engenharia de produção
Controle de qualidade
Análise de falhas
FMEA
Canola
Agricultura
topic Engenharia de produção
Controle de qualidade
Análise de falhas
FMEA
Canola
Agricultura
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
dc.subject.cnpq.fl_str_mv CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
description Objectifying to verify if the use of Mode Analysis and Potencial Fail Effect, FMEA, makes possible to potentialize agricultures cultivation processes, reflecting in a higher profit to the cultures, it was applied this tool in a Canola farming in the Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. The project started with the FMEA Team composition, which analyzed the possible fails to cause culture profit reduction, organizing the main modes and effects of fail. Through of a graphical approach, applied to the severity and occurrence of related fail modes, it was determined those with priority of attention, as well as its possible seriously effects. These modes were submitted to an investigation matrix of common fails and detected the key causes, which received a preventive actions plan. To determine the influence of the foreseen actions in the culture profit, two areas of Canola cultivation were seeded in a field, once that just one of them was used FMEA. The culture submitted to the FMEA was differed for receiving conference from the regulation from the machine for plant the field and supplement from nitrogen in in agreement covering interpretation from the result from the analysis of soil. Each one of the cultures was sampled in 32 items, with gauging of the number of plants, spacing among them, number of pod and profit. The collected data were treated statically, informing that the culture which received the FMEA implementation presented better plants density, better plants distribution in the seeded area, maturation more uniform and profit 11,83% superior.
publishDate 2005
dc.date.issued.fl_str_mv 2005-01-21
dc.date.accessioned.fl_str_mv 2008-10-29
dc.date.available.fl_str_mv 2008-10-29
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv GARRAFA, Marcos. IMPLEMENTATION OF FMEA IN THE OPTIMIZATION OF CANOLA PRODUCTION FACTORS. 2005. 183 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal de Santa Maria, Santa Maria, 2005.
dc.identifier.uri.fl_str_mv http://repositorio.ufsm.br/handle/1/8009
identifier_str_mv GARRAFA, Marcos. IMPLEMENTATION OF FMEA IN THE OPTIMIZATION OF CANOLA PRODUCTION FACTORS. 2005. 183 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal de Santa Maria, Santa Maria, 2005.
url http://repositorio.ufsm.br/handle/1/8009
dc.language.iso.fl_str_mv por
language por
dc.relation.cnpq.fl_str_mv 300800000005
dc.relation.confidence.fl_str_mv 400
300
300
500
300
dc.relation.authority.fl_str_mv f696044a-45b8-4eff-90fb-0f94743c7674
4226700d-9b54-48ae-bf77-5c005189027a
b7ee0acb-1024-41f9-88f7-85310134a6ed
65ffd02f-673b-4571-ae6d-f74866b4a0b8
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia de Produção
dc.publisher.initials.fl_str_mv UFSM
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Engenharia de Produção
publisher.none.fl_str_mv Universidade Federal de Santa Maria
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações do UFSM
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Biblioteca Digital de Teses e Dissertações do UFSM
collection Biblioteca Digital de Teses e Dissertações do UFSM
bitstream.url.fl_str_mv http://repositorio.ufsm.br/bitstream/1/8009/1/MARCOS%20GARRAFA.pdf
http://repositorio.ufsm.br/bitstream/1/8009/2/MARCOS%20GARRAFA.pdf.txt
http://repositorio.ufsm.br/bitstream/1/8009/3/MARCOS%20GARRAFA.pdf.jpg
bitstream.checksum.fl_str_mv 3e4d6713dd48f01c9c1be858aa94bf1b
1bd50783df0a7331b17daa51cb8c5518
4949a20abb746069041e48d0871ec2fa
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações do UFSM - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv atendimento.sib@ufsm.br||tedebc@gmail.com
_version_ 1801485107723239424