Aplicação de FMEA na otimização dos fatores de produção da cultura da canola
Autor(a) principal: | |
---|---|
Data de Publicação: | 2005 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Manancial - Repositório Digital da UFSM |
Texto Completo: | http://repositorio.ufsm.br/handle/1/8009 |
Resumo: | Objectifying to verify if the use of Mode Analysis and Potencial Fail Effect, FMEA, makes possible to potentialize agricultures cultivation processes, reflecting in a higher profit to the cultures, it was applied this tool in a Canola farming in the Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. The project started with the FMEA Team composition, which analyzed the possible fails to cause culture profit reduction, organizing the main modes and effects of fail. Through of a graphical approach, applied to the severity and occurrence of related fail modes, it was determined those with priority of attention, as well as its possible seriously effects. These modes were submitted to an investigation matrix of common fails and detected the key causes, which received a preventive actions plan. To determine the influence of the foreseen actions in the culture profit, two areas of Canola cultivation were seeded in a field, once that just one of them was used FMEA. The culture submitted to the FMEA was differed for receiving conference from the regulation from the machine for plant the field and supplement from nitrogen in in agreement covering interpretation from the result from the analysis of soil. Each one of the cultures was sampled in 32 items, with gauging of the number of plants, spacing among them, number of pod and profit. The collected data were treated statically, informing that the culture which received the FMEA implementation presented better plants density, better plants distribution in the seeded area, maturation more uniform and profit 11,83% superior. |
id |
UFSM_0edc7219cfc845a7069346edf19c2dcd |
---|---|
oai_identifier_str |
oai:repositorio.ufsm.br:1/8009 |
network_acronym_str |
UFSM |
network_name_str |
Manancial - Repositório Digital da UFSM |
repository_id_str |
|
spelling |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canolaImplementation of FMEA in the optimization of canola production factorsEngenharia de produçãoControle de qualidadeAnálise de falhasFMEACanolaAgriculturaCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOObjectifying to verify if the use of Mode Analysis and Potencial Fail Effect, FMEA, makes possible to potentialize agricultures cultivation processes, reflecting in a higher profit to the cultures, it was applied this tool in a Canola farming in the Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. The project started with the FMEA Team composition, which analyzed the possible fails to cause culture profit reduction, organizing the main modes and effects of fail. Through of a graphical approach, applied to the severity and occurrence of related fail modes, it was determined those with priority of attention, as well as its possible seriously effects. These modes were submitted to an investigation matrix of common fails and detected the key causes, which received a preventive actions plan. To determine the influence of the foreseen actions in the culture profit, two areas of Canola cultivation were seeded in a field, once that just one of them was used FMEA. The culture submitted to the FMEA was differed for receiving conference from the regulation from the machine for plant the field and supplement from nitrogen in in agreement covering interpretation from the result from the analysis of soil. Each one of the cultures was sampled in 32 items, with gauging of the number of plants, spacing among them, number of pod and profit. The collected data were treated statically, informing that the culture which received the FMEA implementation presented better plants density, better plants distribution in the seeded area, maturation more uniform and profit 11,83% superior.Objetivando verificar se o emprego da Análise de Modo e Efeito de Falha Potencial, FMEA, possibilita potencializar processos de cultivos agrícolas, refletindo em maior rendimento às culturas, aplicou-se esta ferramenta em uma lavoura de canola na Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. O trabalho iniciou com a constituição da Equipe FMEA, a qual arrolou as falhas possíveis de causar diminuição no rendimento da cultura, estruturando os modos e efeitos principais de falha. Através de uma abordagem gráfica, aplicada à severidade e à ocorrência dos modos de falha relacionados, foram definidos àqueles prioritários de atenção, bem como seus possíveis efeitos mais graves. Estes modos foram submetidos a uma matriz de investigação de falhas comuns e, detectadas as causas-chave, estas receberam um plano de ações preventivas. Para determinar a influência das ações previstas no rendimento da cultura, foram instaladas duas áreas de cultivo de canola a campo, uma com aplicação de FMEA e outra, sem. O cultivo submetido à FMEA diferiu-se por receber conferência da regulagem da semeadeira a campo e suplementação de nitrogênio em cobertura conforme interpretação do resultado da análise de solo. Cada um dos cultivos foi amostrado em 32 pontos, com aferição do número de plantas, espaçamento entre elas, número de síliquas e rendimento. Os dados coletados foram tratados estaticamente, explicitando que o cultivo que recebeu a aplicação da FMEA apresentou melhor densidade de plantas, melhor distribuição das plantas na área de cultivo, maturação mais uniforme e rendimento 11,83 % superior.Universidade Federal de Santa MariaBREngenharia de ProduçãoUFSMPrograma de Pós-Graduação em Engenharia de ProduçãoRosa, Leandro Cantorski dahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783888E6Dallmeyer, Arno Udohttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783144H2Ruppenthal, Janis Elisahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4700407J6Garrafa, Marcos2008-10-292008-10-292005-01-21info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfapplication/pdfGARRAFA, Marcos. IMPLEMENTATION OF FMEA IN THE OPTIMIZATION OF CANOLA PRODUCTION FACTORS. 2005. 183 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal de Santa Maria, Santa Maria, 2005.http://repositorio.ufsm.br/handle/1/8009porinfo:eu-repo/semantics/openAccessreponame:Manancial - Repositório Digital da UFSMinstname:Universidade Federal de Santa Maria (UFSM)instacron:UFSM2022-06-30T11:36:40Zoai:repositorio.ufsm.br:1/8009Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufsm.br/ONGhttps://repositorio.ufsm.br/oai/requestatendimento.sib@ufsm.br||tedebc@gmail.comopendoar:2022-06-30T11:36:40Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM)false |
dc.title.none.fl_str_mv |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola Implementation of FMEA in the optimization of canola production factors |
title |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola |
spellingShingle |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola Garrafa, Marcos Engenharia de produção Controle de qualidade Análise de falhas FMEA Canola Agricultura CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
title_short |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola |
title_full |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola |
title_fullStr |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola |
title_full_unstemmed |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola |
title_sort |
Aplicação de FMEA na otimização dos fatores de produção da cultura da canola |
author |
Garrafa, Marcos |
author_facet |
Garrafa, Marcos |
author_role |
author |
dc.contributor.none.fl_str_mv |
Rosa, Leandro Cantorski da http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783888E6 Dallmeyer, Arno Udo http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783144H2 Ruppenthal, Janis Elisa http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4700407J6 |
dc.contributor.author.fl_str_mv |
Garrafa, Marcos |
dc.subject.por.fl_str_mv |
Engenharia de produção Controle de qualidade Análise de falhas FMEA Canola Agricultura CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
topic |
Engenharia de produção Controle de qualidade Análise de falhas FMEA Canola Agricultura CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
description |
Objectifying to verify if the use of Mode Analysis and Potencial Fail Effect, FMEA, makes possible to potentialize agricultures cultivation processes, reflecting in a higher profit to the cultures, it was applied this tool in a Canola farming in the Escola-Fazenda da Sociedade Educacional Três de Maio, SETREM. The project started with the FMEA Team composition, which analyzed the possible fails to cause culture profit reduction, organizing the main modes and effects of fail. Through of a graphical approach, applied to the severity and occurrence of related fail modes, it was determined those with priority of attention, as well as its possible seriously effects. These modes were submitted to an investigation matrix of common fails and detected the key causes, which received a preventive actions plan. To determine the influence of the foreseen actions in the culture profit, two areas of Canola cultivation were seeded in a field, once that just one of them was used FMEA. The culture submitted to the FMEA was differed for receiving conference from the regulation from the machine for plant the field and supplement from nitrogen in in agreement covering interpretation from the result from the analysis of soil. Each one of the cultures was sampled in 32 items, with gauging of the number of plants, spacing among them, number of pod and profit. The collected data were treated statically, informing that the culture which received the FMEA implementation presented better plants density, better plants distribution in the seeded area, maturation more uniform and profit 11,83% superior. |
publishDate |
2005 |
dc.date.none.fl_str_mv |
2005-01-21 2008-10-29 2008-10-29 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
GARRAFA, Marcos. IMPLEMENTATION OF FMEA IN THE OPTIMIZATION OF CANOLA PRODUCTION FACTORS. 2005. 183 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal de Santa Maria, Santa Maria, 2005. http://repositorio.ufsm.br/handle/1/8009 |
identifier_str_mv |
GARRAFA, Marcos. IMPLEMENTATION OF FMEA IN THE OPTIMIZATION OF CANOLA PRODUCTION FACTORS. 2005. 183 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal de Santa Maria, Santa Maria, 2005. |
url |
http://repositorio.ufsm.br/handle/1/8009 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia de Produção UFSM Programa de Pós-Graduação em Engenharia de Produção |
publisher.none.fl_str_mv |
Universidade Federal de Santa Maria BR Engenharia de Produção UFSM Programa de Pós-Graduação em Engenharia de Produção |
dc.source.none.fl_str_mv |
reponame:Manancial - Repositório Digital da UFSM instname:Universidade Federal de Santa Maria (UFSM) instacron:UFSM |
instname_str |
Universidade Federal de Santa Maria (UFSM) |
instacron_str |
UFSM |
institution |
UFSM |
reponame_str |
Manancial - Repositório Digital da UFSM |
collection |
Manancial - Repositório Digital da UFSM |
repository.name.fl_str_mv |
Manancial - Repositório Digital da UFSM - Universidade Federal de Santa Maria (UFSM) |
repository.mail.fl_str_mv |
atendimento.sib@ufsm.br||tedebc@gmail.com |
_version_ |
1805922017809006592 |