Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/30494 |
Resumo: | Trabalho de Conclusão de Curso (Graduação) |
id |
UFU_866afbea2495e2171bdb06cf5b1b2da4 |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/30494 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin.Composite resinFinishing and polishingLight emitted diodeLight cure unitCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOSTrabalho de Conclusão de Curso (Graduação)The aim of this study was to evaluate different Light Cure Unit (LCU) and polishing protocols on surface roughness and gloss of a composite resin. Roughness and gloss of samples (n=8) of nanohybrid composite resin (E1, VOCO Cuxhaven, Hamburg, Germany) were evaluated and lightcured with different light-emitting diode (LED) devices: Valo (Ultradent, Salt Lake City, Utah, USA), Valo Grand (Ultradent, Salt Lake City, Utah, USA), Bluephase 20i (Ivoclar, Schaan, Liechtenstein), Elipar DeepCure-L (3M ESPE, St Paul, MN, USA), Emitter D (Schuster, Hyannis, MA, USA) and Radii Xpert (SDI Bayswater, Survey, Australia); and polished with three different systems: Sof-Lex Diamond Polishing System (3M ESPE, St Paul, MN, USA), Jiffy Original Composite System (Ultradent, Salt Lake City, Utah, USA) and Opti1Step (Kerr, Orange, CA, USA). There was no difference for the different LEDs for roughness (P=0.935) and gloss (P=0.012). For the superficial roughness test Sof-Lex and Opti1Step were similar between themselves and significantly superior to Jiffy. For the gloss test Sof-Lex and Opti1Step presented superior results than Jiffy. The LCU did not influence the roughness and gloss of the composite resin, while the polishing protocol showed influence on the result.2022-11-09Universidade Federal de UberlândiaBrasilOdontologiaCardoso, Igor OliveirosSimamoto Júnior, Paulo Cézarhttp://lattes.cnpq.br/3316615944784016Zeola, Lívia FavaroSantos Filho, Paulo César de FreitasAllig, Gabriela Resende2020-11-26T18:46:33Z2020-11-26T18:46:33Z2020-11-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfALLIG, Gabriela Resende. Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. 2020. 20 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2020.https://repositorio.ufu.br/handle/123456789/30494enghttp://creativecommons.org/licenses/by-nc-nd/3.0/us/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2023-12-14T15:46:29Zoai:repositorio.ufu.br:123456789/30494Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2023-12-14T15:46:29Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
title |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
spellingShingle |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. Allig, Gabriela Resende Composite resin Finishing and polishing Light emitted diode Light cure unit CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
title_short |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
title_full |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
title_fullStr |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
title_full_unstemmed |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
title_sort |
Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. |
author |
Allig, Gabriela Resende |
author_facet |
Allig, Gabriela Resende |
author_role |
author |
dc.contributor.none.fl_str_mv |
Cardoso, Igor Oliveiros Simamoto Júnior, Paulo Cézar http://lattes.cnpq.br/3316615944784016 Zeola, Lívia Favaro Santos Filho, Paulo César de Freitas |
dc.contributor.author.fl_str_mv |
Allig, Gabriela Resende |
dc.subject.por.fl_str_mv |
Composite resin Finishing and polishing Light emitted diode Light cure unit CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
topic |
Composite resin Finishing and polishing Light emitted diode Light cure unit CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::MATERIAIS ODONTOLOGICOS |
description |
Trabalho de Conclusão de Curso (Graduação) |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-11-26T18:46:33Z 2020-11-26T18:46:33Z 2020-11-09 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
ALLIG, Gabriela Resende. Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. 2020. 20 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2020. https://repositorio.ufu.br/handle/123456789/30494 |
identifier_str_mv |
ALLIG, Gabriela Resende. Influence of finishing and polishing protocols and light curing units on the surface roughness and gloss of a composite resin. 2020. 20 f. Trabalho de Conclusão de Curso (Graduação em Odontologia) - Universidade Federal de Uberlândia, Uberlândia, 2020. |
url |
https://repositorio.ufu.br/handle/123456789/30494 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.rights.driver.fl_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
http://creativecommons.org/licenses/by-nc-nd/3.0/us/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Odontologia |
publisher.none.fl_str_mv |
Universidade Federal de Uberlândia Brasil Odontologia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1813711481011699712 |