Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFU |
Texto Completo: | https://repositorio.ufu.br/handle/123456789/17585 https://doi.org/10.14393/ufu.di.2014.350 |
Resumo: | The present work used glycerol as a carbon source to obtain bio-based products from fermentation with fungi. It was used four different microorganisms in order to convert glycerol into biopolymers and biosurfactants. The microorganisms tested were: Mucor racemosus Fresenius, Monilia sitophila, Fusarium sp and Acremonium sp. For each microorganism exploratory tests were held in order to select strains capable of converting glycerol in bio-based products of interest. In the first exploratory test of 168 hours fermentation, the microorganism Mucor racemosus Fresenius showed the formation of 1 g/L biopolímero.As variables evaluated in subsequent tests (in Erlenmyer) are in chronological order: the concentration of glycerol; fermentation time; cultivation time of inoculum amid Czapeck; trials with continuous aeration; review the replacement of the medium during fermentation;review of the flow rate; evaluate the influence of aeration applied in two stages in cell growth and production of the biopolymer; assessing the effect of adding yeast extract on gum production and evaluation of gum production without addition of glycerol. These assays have promoted the following results: glycerol concentration of 50 g/L 2 g/L yeast extract with fermentation time of 96 hours with agitation of 100 rpm and 120 hours of culture age of the inoculum, aeration system using flow rate of 4 vvm in the production phase (72 hours after the 24 h without aeration) without replacement of culture medium. Under these conditions there was a maximum yield of 14.21 g/L and 67.7% gum formed consumption glicerol. After these tests the kinetic assay was performed in Biostat B fermenter with a capacity of 2L, with a working volume of 1L to evaluate the performance of the fungi in the production of biopolymer in the best conditions established process. In this step has been generated an output of 23 g/L of starch and glycerol consumption of 75%. The analysis of the infrared spectrum of the biopolymer produced compared to xanthana gum showed that biopolymers have carbohydrate nature. |
id |
UFU_deff9bed6839553aeadc85c075cb48fd |
---|---|
oai_identifier_str |
oai:repositorio.ufu.br:123456789/17585 |
network_acronym_str |
UFU |
network_name_str |
Repositório Institucional da UFU |
repository_id_str |
|
spelling |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímerosEngenharia QuímicaGlicerinaBiopolímerosFermentaçãoGlicerolFungosAeraçãoGlycerolBiopolymerFungiFermentationAerationCNPQ::CIENCIAS BIOLOGICAS::GENETICAThe present work used glycerol as a carbon source to obtain bio-based products from fermentation with fungi. It was used four different microorganisms in order to convert glycerol into biopolymers and biosurfactants. The microorganisms tested were: Mucor racemosus Fresenius, Monilia sitophila, Fusarium sp and Acremonium sp. For each microorganism exploratory tests were held in order to select strains capable of converting glycerol in bio-based products of interest. In the first exploratory test of 168 hours fermentation, the microorganism Mucor racemosus Fresenius showed the formation of 1 g/L biopolímero.As variables evaluated in subsequent tests (in Erlenmyer) are in chronological order: the concentration of glycerol; fermentation time; cultivation time of inoculum amid Czapeck; trials with continuous aeration; review the replacement of the medium during fermentation;review of the flow rate; evaluate the influence of aeration applied in two stages in cell growth and production of the biopolymer; assessing the effect of adding yeast extract on gum production and evaluation of gum production without addition of glycerol. These assays have promoted the following results: glycerol concentration of 50 g/L 2 g/L yeast extract with fermentation time of 96 hours with agitation of 100 rpm and 120 hours of culture age of the inoculum, aeration system using flow rate of 4 vvm in the production phase (72 hours after the 24 h without aeration) without replacement of culture medium. Under these conditions there was a maximum yield of 14.21 g/L and 67.7% gum formed consumption glicerol. After these tests the kinetic assay was performed in Biostat B fermenter with a capacity of 2L, with a working volume of 1L to evaluate the performance of the fungi in the production of biopolymer in the best conditions established process. In this step has been generated an output of 23 g/L of starch and glycerol consumption of 75%. The analysis of the infrared spectrum of the biopolymer produced compared to xanthana gum showed that biopolymers have carbohydrate nature.Fundação de Amparo a Pesquisa do Estado de Minas GeraisDissertação (Mestrado)Este trabalho utilizou glicerol como fonte de carbono na obtenção de biopolímero a partir de fermentação com fungos do cerrado. Foram utilizados quatro diferentes micro-organismos com o objetivo de converter glicerol em biopolímeros. Os micro-organismos testados foram: Mucor racemosus Fresenius, Monilia sitophila, Fusarium sp, e Acremonium sp. Para cada microrganismo realizou-se ensaios exploratórios, afim de selecionar cepas capazes de converter glicerol no bioproduto de interesse. No primeiro teste exploratório, com 168 horas de fermentação, o micro-organismo Mucor racemosus Fresenius, apresentou formação de 1 g/L de biopolímero. As variáveis avaliadas nos ensaios posteriores (em erlenmyer) foram em sequência cronológica: concentração inicial de glicerol; tempo de fermentação; tempo de cultivo do inóculo em meio Czapeck; ensaios com aeração contínua; avaliação da reposição de meio durante a fermentação; avaliação da vazão de ar; avaliação da influência da aeração aplicada em duas fases no crescimento celular e na produção do biopolímero; avaliação do efeito da adição de extrato de levedura sobre a produção de goma e avaliação da produção de goma sem adição do glicerol. Dentre as condições estudadas identificou-se como mais promissoras: concentração inicial de glicerol de 50 g/L, 2 g/L de extrato de levedura, com tempo de fermentação de 96 horas e com agitação de 100 rpm, 120 horas de idade de cultivo do inóculo, sistema com aeração empregando vazão de ar de 4 vvm na fase de produção (72 horas após as 24 h sem aeração), sem reposição de meio de cultivo. Nestas condições houve uma produção máxima de 14,21 g/L de goma formada e 67,7% consumo de glicerol. Após estes ensaios foi realizado o ensaio cinético em fermentador Biostat B de capacidade de 2L, com volume útil de 1L, para avaliar o desempenho do fungo na produção do biopolímero nas melhores condições estabelecidas de processo. Nesta etapa foi gerada uma produção de 23 g/L de goma e consumo de glicerol de 75%. A análise do espectro de infravermelho da goma produzida comparada a goma xanthana mostrou, que as gomas possuem natureza de carboidrato.Univerdade Federal de UberlândiaBrasilPrograma de Pós-graduação em Engenharia QuímicaCoutinho Filho, Ubirajarahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4797915J2Vieira, Patrícia Angélicahttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4169929D0Cardoso, Vicelma Luizhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787074J7Resende, Miriam Maria dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4703538D3Macedo, Gorete Ribeiro dehttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4788057U7Araújo, Thaíssa Rodrigues2016-08-04T18:43:38Z2016-08-04T18:43:38Z2014-07-22info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfARAÚJO, Thaíssa Rodrigues. Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros. 2014. 81 f. Dissertação (Mestrado em Engenharia Química) - Universidade Federal de Uberlândia, Uberlândia, 2014. DOI https://doi.org/10.14393/ufu.di.2014.350https://repositorio.ufu.br/handle/123456789/17585https://doi.org/10.14393/ufu.di.2014.350porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2021-08-10T14:02:54Zoai:repositorio.ufu.br:123456789/17585Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2021-08-10T14:02:54Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false |
dc.title.none.fl_str_mv |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
title |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
spellingShingle |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros Araújo, Thaíssa Rodrigues Engenharia Química Glicerina Biopolímeros Fermentação Glicerol Fungos Aeração Glycerol Biopolymer Fungi Fermentation Aeration CNPQ::CIENCIAS BIOLOGICAS::GENETICA |
title_short |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
title_full |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
title_fullStr |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
title_full_unstemmed |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
title_sort |
Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros |
author |
Araújo, Thaíssa Rodrigues |
author_facet |
Araújo, Thaíssa Rodrigues |
author_role |
author |
dc.contributor.none.fl_str_mv |
Coutinho Filho, Ubirajara http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4797915J2 Vieira, Patrícia Angélica http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4169929D0 Cardoso, Vicelma Luiz http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787074J7 Resende, Miriam Maria de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4703538D3 Macedo, Gorete Ribeiro de http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4788057U7 |
dc.contributor.author.fl_str_mv |
Araújo, Thaíssa Rodrigues |
dc.subject.por.fl_str_mv |
Engenharia Química Glicerina Biopolímeros Fermentação Glicerol Fungos Aeração Glycerol Biopolymer Fungi Fermentation Aeration CNPQ::CIENCIAS BIOLOGICAS::GENETICA |
topic |
Engenharia Química Glicerina Biopolímeros Fermentação Glicerol Fungos Aeração Glycerol Biopolymer Fungi Fermentation Aeration CNPQ::CIENCIAS BIOLOGICAS::GENETICA |
description |
The present work used glycerol as a carbon source to obtain bio-based products from fermentation with fungi. It was used four different microorganisms in order to convert glycerol into biopolymers and biosurfactants. The microorganisms tested were: Mucor racemosus Fresenius, Monilia sitophila, Fusarium sp and Acremonium sp. For each microorganism exploratory tests were held in order to select strains capable of converting glycerol in bio-based products of interest. In the first exploratory test of 168 hours fermentation, the microorganism Mucor racemosus Fresenius showed the formation of 1 g/L biopolímero.As variables evaluated in subsequent tests (in Erlenmyer) are in chronological order: the concentration of glycerol; fermentation time; cultivation time of inoculum amid Czapeck; trials with continuous aeration; review the replacement of the medium during fermentation;review of the flow rate; evaluate the influence of aeration applied in two stages in cell growth and production of the biopolymer; assessing the effect of adding yeast extract on gum production and evaluation of gum production without addition of glycerol. These assays have promoted the following results: glycerol concentration of 50 g/L 2 g/L yeast extract with fermentation time of 96 hours with agitation of 100 rpm and 120 hours of culture age of the inoculum, aeration system using flow rate of 4 vvm in the production phase (72 hours after the 24 h without aeration) without replacement of culture medium. Under these conditions there was a maximum yield of 14.21 g/L and 67.7% gum formed consumption glicerol. After these tests the kinetic assay was performed in Biostat B fermenter with a capacity of 2L, with a working volume of 1L to evaluate the performance of the fungi in the production of biopolymer in the best conditions established process. In this step has been generated an output of 23 g/L of starch and glycerol consumption of 75%. The analysis of the infrared spectrum of the biopolymer produced compared to xanthana gum showed that biopolymers have carbohydrate nature. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-07-22 2016-08-04T18:43:38Z 2016-08-04T18:43:38Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
ARAÚJO, Thaíssa Rodrigues. Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros. 2014. 81 f. Dissertação (Mestrado em Engenharia Química) - Universidade Federal de Uberlândia, Uberlândia, 2014. DOI https://doi.org/10.14393/ufu.di.2014.350 https://repositorio.ufu.br/handle/123456789/17585 https://doi.org/10.14393/ufu.di.2014.350 |
identifier_str_mv |
ARAÚJO, Thaíssa Rodrigues. Reaproveitamento de glicerol para produção de bioprodutos: biopolímeros. 2014. 81 f. Dissertação (Mestrado em Engenharia Química) - Universidade Federal de Uberlândia, Uberlândia, 2014. DOI https://doi.org/10.14393/ufu.di.2014.350 |
url |
https://repositorio.ufu.br/handle/123456789/17585 https://doi.org/10.14393/ufu.di.2014.350 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Univerdade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Química |
publisher.none.fl_str_mv |
Univerdade Federal de Uberlândia Brasil Programa de Pós-graduação em Engenharia Química |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFU instname:Universidade Federal de Uberlândia (UFU) instacron:UFU |
instname_str |
Universidade Federal de Uberlândia (UFU) |
instacron_str |
UFU |
institution |
UFU |
reponame_str |
Repositório Institucional da UFU |
collection |
Repositório Institucional da UFU |
repository.name.fl_str_mv |
Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU) |
repository.mail.fl_str_mv |
diinf@dirbi.ufu.br |
_version_ |
1805569597384949760 |