Comparative study between the axial compression resistance of argams with the following additives: liquid detergent, cal, and white tail

• Autor(a) principal: Esteves, Hélio Matos
• Data de Publicação: 2019
• Outros Autores: Colares, Rodrigo Silva, Lages, Matheus da Silva, Starick, Henrique, Salomão, Pedro Emílio Amador
• Tipo de documento: Artigo
• Idioma: por
• Título da fonte: Revista Brasileira Multidisciplinar
• Texto Completo: http://revistarebram.com/index.php/revistauniara/article/view/589
• topic: Mortar; Additive; Liquid Detergent; White Cola (PVA); Hydrated Lime; Argamassa; Aditivo; Detergente Líquido; Cola Branca (PVA); Cal Hidratada

 This study has the purpose of verifying the axial compressive strength of mortars manufactured with different additives, which are: hydrated lime, liquid detergent and white glue (PVA). For the preparation of this work, a bibliographical review was carried out and the laboratory experiment was set up. The traces of the three additives were the same, modifying only the addition of the additive. The first mortar was produced with liquid detergent, the second had the addition of white glue (PVA) and the third was using traditional hydrated lime. After production, the specimens were molded. After molding, the specimens were stored in the laboratory until adequate cure was obtained, and then they were disrupted with the aid of an automated hydraulic press. With the results of the resistance of the test specimens, it was observed that the resistance of the mortars with liquid detergent and with white glue (PVA) were equivalent, whereas the one composed of hydrated lime acquired a lower resistance.