Study of drying kinetics in ceramic plates with the addition of diatomite tailings
Autor(a) principal: | |
---|---|
Data de Publicação: | 2022 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Research, Society and Development |
Texto Completo: | https://rsdjournal.org/index.php/rsd/article/view/30790 |
Resumo: | The drying process of ceramic bricks plays a key role in the amount of water available both inside the material and on its surface. This work aimed to analyze drying kinetics on ceramic tiles with different percentages of diatomite tailings, which was experimentally carried out in an oven with forced air circulation. To this end, laboratory tests were performed using different samples in which the drying kinetics was evaluated considering different environmental conditions (temperature and relative humidity), based on a 2k factorial experimental design with three factors: the drying temperatures (333 and 383 K), the homogeneity of the mixture (30 and 60 min) and the percentage of the tailings (10 and 30%). From the results matrix, some models of drying kinetics were adjusted to the experimental data, having the Page model presented the best result. Still in possession of the results matrix, a regression model was applied to obtain equations that describe Page's fit parameters. The drying curves developed from the estimated parameters, presented a significant agreement with the experimental data, being validated within a 99% confidence interval. |
id |
UNIFEI_8217bc5fe11e5775fc96e663f402c3e6 |
---|---|
oai_identifier_str |
oai:ojs.pkp.sfu.ca:article/30790 |
network_acronym_str |
UNIFEI |
network_name_str |
Research, Society and Development |
repository_id_str |
|
spelling |
Study of drying kinetics in ceramic plates with the addition of diatomite tailingsEstudio de cinéticas de secado en placas cerámicas con adición de relaves de diatomeasEstudo da cinética de secagem em placas cerâmicas com adição de rejeitos de diatomitaSecagemParâmetros estimadosDesign experimental.DryingEstimated parametersExperimental design.SecadoParámetros estimadosDiseño experimental.The drying process of ceramic bricks plays a key role in the amount of water available both inside the material and on its surface. This work aimed to analyze drying kinetics on ceramic tiles with different percentages of diatomite tailings, which was experimentally carried out in an oven with forced air circulation. To this end, laboratory tests were performed using different samples in which the drying kinetics was evaluated considering different environmental conditions (temperature and relative humidity), based on a 2k factorial experimental design with three factors: the drying temperatures (333 and 383 K), the homogeneity of the mixture (30 and 60 min) and the percentage of the tailings (10 and 30%). From the results matrix, some models of drying kinetics were adjusted to the experimental data, having the Page model presented the best result. Still in possession of the results matrix, a regression model was applied to obtain equations that describe Page's fit parameters. The drying curves developed from the estimated parameters, presented a significant agreement with the experimental data, being validated within a 99% confidence interval.El proceso de secado de los ladrillos cerámicos juega un papel fundamental en la cantidad de agua disponible tanto en el interior del material como en su superficie. Este trabajo tuvo como objetivo analizar la cinética de secado sobre baldosas cerámicas con diferentes porcentajes de relaves de diatomeas, el cual se realizó experimentalmente en un horno con circulación de aire forzado. Para ello, se realizaron ensayos de laboratorio con diferentes muestras en las que se evaluó la cinética de secado considerando diferentes condiciones ambientales (temperatura y humedad relativa), a partir de un diseño experimental factorial 2k con tres factores: las temperaturas de secado (333 y 383 K), la homogeneidad de la mezcla (30 y 60 min) y el porcentaje de los relaves (10 y 30%). A partir de la matriz de resultados, se ajustaron algunos modelos de cinética de secado a los datos experimentales, siendo el modelo de Page el que presentó el mejor resultado. Todavía en posesión de la matriz de resultados, se aplicó un modelo de regresión para obtener ecuaciones que describan los parámetros de ajuste de Page. Las curvas de secado desarrolladas a partir de los parámetros estimados, presentaron una concordancia significativa con los datos experimentales, siendo validadas dentro de un intervalo de confianza del 99%.O processo de secagem dos tijolos cerâmicos desempenha um papel fundamental na quantidade de água disponível tanto no interior do material quanto em sua superfície. Este trabalho teve como objetivo analisar a cinética de secagem de revestimentos cerâmicos com diferentes porcentagens de rejeitos de diatomita, que foi realizado experimentalmente em estufa com circulação forçada de ar. Para tanto, foram realizados ensaios laboratoriais em diferentes amostras nas quais a cinética de secagem foi avaliada considerando diferentes condições ambientais (temperatura e umidade relativa), com base em um delineamento fatorial 2k com três fatores: as temperaturas de secagem (333 e 382 K), a homogeneidade da mistura (30 e 60 min) e a porcentagem de rejeitos (10 e 30%). A partir da matriz de resultados, alguns modelos de cinética de secagem foram ajustados aos dados experimentais, sendo que o modelo de Page apresentou o melhor resultado. Ainda de posse da matriz de resultados, aplicou-se um modelo de regressão para obter equações que descrevem os parâmetros de ajuste de Page. As curvas de secagem desenvolvidas a partir dos parâmetros estimados apresentaram concordância significativa com os dados experimentais, sendo validadas dentro de um intervalo de confiança de 99%.Research, Society and Development2022-06-17info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://rsdjournal.org/index.php/rsd/article/view/3079010.33448/rsd-v11i8.30790Research, Society and Development; Vol. 11 No. 8; e22911830790Research, Society and Development; Vol. 11 Núm. 8; e22911830790Research, Society and Development; v. 11 n. 8; e229118307902525-3409reponame:Research, Society and Developmentinstname:Universidade Federal de Itajubá (UNIFEI)instacron:UNIFEIenghttps://rsdjournal.org/index.php/rsd/article/view/30790/26443Copyright (c) 2022 Raniere Fernandes Costa; Alysson Dantas Ferreira ; José Jefferson da Silva Nascimento; Maria Luiza de Souza Rezende; José Jorge da Silva Junior; Antônio Nunes de Oliveira Vieirahttps://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccessCosta, Raniere FernandesFerreira , Alysson Dantas Nascimento, José Jefferson da SilvaRezende, Maria Luiza de SouzaSilva Junior, José Jorge daVieira, Antônio Nunes de Oliveira2022-07-01T13:34:06Zoai:ojs.pkp.sfu.ca:article/30790Revistahttps://rsdjournal.org/index.php/rsd/indexPUBhttps://rsdjournal.org/index.php/rsd/oairsd.articles@gmail.com2525-34092525-3409opendoar:2024-01-17T09:47:25.358013Research, Society and Development - Universidade Federal de Itajubá (UNIFEI)false |
dc.title.none.fl_str_mv |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings Estudio de cinéticas de secado en placas cerámicas con adición de relaves de diatomeas Estudo da cinética de secagem em placas cerâmicas com adição de rejeitos de diatomita |
title |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings |
spellingShingle |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings Costa, Raniere Fernandes Secagem Parâmetros estimados Design experimental. Drying Estimated parameters Experimental design. Secado Parámetros estimados Diseño experimental. |
title_short |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings |
title_full |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings |
title_fullStr |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings |
title_full_unstemmed |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings |
title_sort |
Study of drying kinetics in ceramic plates with the addition of diatomite tailings |
author |
Costa, Raniere Fernandes |
author_facet |
Costa, Raniere Fernandes Ferreira , Alysson Dantas Nascimento, José Jefferson da Silva Rezende, Maria Luiza de Souza Silva Junior, José Jorge da Vieira, Antônio Nunes de Oliveira |
author_role |
author |
author2 |
Ferreira , Alysson Dantas Nascimento, José Jefferson da Silva Rezende, Maria Luiza de Souza Silva Junior, José Jorge da Vieira, Antônio Nunes de Oliveira |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
Costa, Raniere Fernandes Ferreira , Alysson Dantas Nascimento, José Jefferson da Silva Rezende, Maria Luiza de Souza Silva Junior, José Jorge da Vieira, Antônio Nunes de Oliveira |
dc.subject.por.fl_str_mv |
Secagem Parâmetros estimados Design experimental. Drying Estimated parameters Experimental design. Secado Parámetros estimados Diseño experimental. |
topic |
Secagem Parâmetros estimados Design experimental. Drying Estimated parameters Experimental design. Secado Parámetros estimados Diseño experimental. |
description |
The drying process of ceramic bricks plays a key role in the amount of water available both inside the material and on its surface. This work aimed to analyze drying kinetics on ceramic tiles with different percentages of diatomite tailings, which was experimentally carried out in an oven with forced air circulation. To this end, laboratory tests were performed using different samples in which the drying kinetics was evaluated considering different environmental conditions (temperature and relative humidity), based on a 2k factorial experimental design with three factors: the drying temperatures (333 and 383 K), the homogeneity of the mixture (30 and 60 min) and the percentage of the tailings (10 and 30%). From the results matrix, some models of drying kinetics were adjusted to the experimental data, having the Page model presented the best result. Still in possession of the results matrix, a regression model was applied to obtain equations that describe Page's fit parameters. The drying curves developed from the estimated parameters, presented a significant agreement with the experimental data, being validated within a 99% confidence interval. |
publishDate |
2022 |
dc.date.none.fl_str_mv |
2022-06-17 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/30790 10.33448/rsd-v11i8.30790 |
url |
https://rsdjournal.org/index.php/rsd/article/view/30790 |
identifier_str_mv |
10.33448/rsd-v11i8.30790 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
https://rsdjournal.org/index.php/rsd/article/view/30790/26443 |
dc.rights.driver.fl_str_mv |
https://creativecommons.org/licenses/by/4.0 info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
https://creativecommons.org/licenses/by/4.0 |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Research, Society and Development |
publisher.none.fl_str_mv |
Research, Society and Development |
dc.source.none.fl_str_mv |
Research, Society and Development; Vol. 11 No. 8; e22911830790 Research, Society and Development; Vol. 11 Núm. 8; e22911830790 Research, Society and Development; v. 11 n. 8; e22911830790 2525-3409 reponame:Research, Society and Development instname:Universidade Federal de Itajubá (UNIFEI) instacron:UNIFEI |
instname_str |
Universidade Federal de Itajubá (UNIFEI) |
instacron_str |
UNIFEI |
institution |
UNIFEI |
reponame_str |
Research, Society and Development |
collection |
Research, Society and Development |
repository.name.fl_str_mv |
Research, Society and Development - Universidade Federal de Itajubá (UNIFEI) |
repository.mail.fl_str_mv |
rsd.articles@gmail.com |
_version_ |
1797052767701827584 |