Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/157006 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-08-28/000906413.pdf |
Resumo: | Through a current and practical approach, this work aims to demonstrate the development of a programacional logic in Visual Basic for Application (VBA) language to calculate the initials values of shafts and square keys in gear transmission system. Thus, the programming of the transmission system in Visual Basic language was performed. After this a user-friendly graphical interface was developed too. After the programming, the values were calculated for a transmission system and a report has created with all the calculated parameters during all the steps. After compared with the values obtained through the manual calculation, thus demonstrating that the software developed presents results consistent with the manual calculation |
id |
UNSP_c2a03d63e695fe7249cb30327ba51ae1 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/157006 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBAPreliminary design of shafts and keys for cylindrical gear transmission systems using the VBA languageEngrenagensVisual Basic (Linguagem de programação de computador)Lógica de computadorProjetos de engenhariaGearingThrough a current and practical approach, this work aims to demonstrate the development of a programacional logic in Visual Basic for Application (VBA) language to calculate the initials values of shafts and square keys in gear transmission system. Thus, the programming of the transmission system in Visual Basic language was performed. After this a user-friendly graphical interface was developed too. After the programming, the values were calculated for a transmission system and a report has created with all the calculated parameters during all the steps. After compared with the values obtained through the manual calculation, thus demonstrating that the software developed presents results consistent with the manual calculationAtravés de uma abordagem atual e prática, estre trabalho tem como objetivo o desenvolvimento de uma lógica programacional em linguagem do Visual Basic for Applications (VBA) para cálculos iniciais de eixos e chavetas paralelas em sistemas de transmissão por engrenagens cilíndricas. Assim realizou-se a a construção da lógica programacional do sistema de transmissão em linguagem do Visual Basic. Após isto desenvolveu-se uma interface gráfica amigável para o usuário. Finalizada a programação, calculou-se os valores para um sistema de transmissão e criou-se um relatório contendo todas os parâmetros calculados durante as etapas. Após isto comparou-se com os valores obtidos através do cálculo manual demonstrando desta forma que o software desenvolvido apresenta resultados coerentes ao cálculo manualUniversidade Estadual Paulista (Unesp)Silva, Fernando de Azevedo [UNESP]Universidade Estadual Paulista (Unesp)Santos, Raphael Augusto de Oliveira [UNESP]2018-09-19T17:29:31Z2018-09-19T17:29:31Z2017-11-14info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesis47 f.application/pdfSANTOS, Raphael Augusto de Oliveira. Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA. 2017. 47 f. Trabalho de conclusão de curso (Bacharelado - Engenharia Mecânica) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2017.http://hdl.handle.net/11449/157006000906413http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-08-28/000906413.pdfAlephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2024-07-02T17:52:29Zoai:repositorio.unesp.br:11449/157006Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T18:01:52.563470Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA Preliminary design of shafts and keys for cylindrical gear transmission systems using the VBA language |
title |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA |
spellingShingle |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA Santos, Raphael Augusto de Oliveira [UNESP] Engrenagens Visual Basic (Linguagem de programação de computador) Lógica de computador Projetos de engenharia Gearing |
title_short |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA |
title_full |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA |
title_fullStr |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA |
title_full_unstemmed |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA |
title_sort |
Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA |
author |
Santos, Raphael Augusto de Oliveira [UNESP] |
author_facet |
Santos, Raphael Augusto de Oliveira [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Silva, Fernando de Azevedo [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Santos, Raphael Augusto de Oliveira [UNESP] |
dc.subject.por.fl_str_mv |
Engrenagens Visual Basic (Linguagem de programação de computador) Lógica de computador Projetos de engenharia Gearing |
topic |
Engrenagens Visual Basic (Linguagem de programação de computador) Lógica de computador Projetos de engenharia Gearing |
description |
Through a current and practical approach, this work aims to demonstrate the development of a programacional logic in Visual Basic for Application (VBA) language to calculate the initials values of shafts and square keys in gear transmission system. Thus, the programming of the transmission system in Visual Basic language was performed. After this a user-friendly graphical interface was developed too. After the programming, the values were calculated for a transmission system and a report has created with all the calculated parameters during all the steps. After compared with the values obtained through the manual calculation, thus demonstrating that the software developed presents results consistent with the manual calculation |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-11-14 2018-09-19T17:29:31Z 2018-09-19T17:29:31Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SANTOS, Raphael Augusto de Oliveira. Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA. 2017. 47 f. Trabalho de conclusão de curso (Bacharelado - Engenharia Mecânica) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2017. http://hdl.handle.net/11449/157006 000906413 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-08-28/000906413.pdf |
identifier_str_mv |
SANTOS, Raphael Augusto de Oliveira. Projeto preliminar de eixos e chavetas para sistemas de transmissão por engrenagens cilíndricas utilizando a linguagem VBA. 2017. 47 f. Trabalho de conclusão de curso (Bacharelado - Engenharia Mecânica) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2017. 000906413 |
url |
http://hdl.handle.net/11449/157006 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2018-08-28/000906413.pdf |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
47 f. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808128886962126848 |