A Self-Powered and Autonomous Fringing Field Capacitive Sensor Integrated into a Micro Sprinkler Spinner to Measure Soil Water Content

• Autor(a) principal: Costa, Eduardo Ferreira da
• Data de Publicação: 2017
• Outros Autores: Oliveira, Nestor E. de, Morais, Flavio J. O. [UNESP], Carvalhaes-Dias, Pedro, Duarte, Luis Fernando C., Cabot, Andreu, Siqueira Dias, J. A.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://dx.doi.org/10.3390/s17030575; http://hdl.handle.net/11449/162675
• topic: autonomous sensors; soil water content sensors; capacitive soil water content sensor; energy harvesting; micro sprinkler spinner generator; ultra-low-power circuits

We present here the design and fabrication of a self- powered and autonomous fringing field capacitive sensor to measure soil water content. The sensor is manufactured using a conventional printed circuit board and includes a porous ceramic. To read the sensor, we use a circuit that includes a 10 kHz triangle wave generator, an AC amplifier, a precision rectifier and a microcontroller. In terms of performance, the sensor's capacitance ( measured in a laboratory prototype) increases up to 5% when the volumetric water content of the porous ceramic changed from 3% to 36%, resulting in a sensitivity of S = 15.5 pF per unity change. Repeatability tests for capacitance measurement showed that the theta(v) sensor's root mean square error is 0.13%. The average current consumption of the system ( sensor and signal conditioning circuit) is less than 1.5 mu A, which demonstrates its suitability for being powered by energy harvesting systems. We developed a complete irrigation control system that integrates the sensor, an energy harvesting module composed of a microgenerator installed on the top of a micro sprinkler spinner, and a DC/ DC converter circuit that charges a 1 F supercapacitor. The energy harvesting module operates only when the micro sprinkler spinner is irrigating the soil, and the supercapacitor is fully charged to 5 V in about 3 h during the first irrigation. After the first irrigation, with the supercap fully charged, the system can operate powered only by the supercapacitor for approximately 23 days, without any energy being harvested.