Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system

Detalhes bibliográficos
Autor(a) principal: Vazquez-Alcaraz, Silverio
Data de Publicação: 2024
Outros Autores: Gancedo-Caravia, Lucia, Arias , Ana, Bascones, Jaime
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Journal of applied oral science (Online)
Texto Completo: https://www.revistas.usp.br/jaos/article/view/225405
Resumo: This study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.
id USP-17_ece5cdd918a6589a2cdbb5b1d80785f5
oai_identifier_str oai:revistas.usp.br:article/225405
network_acronym_str USP-17
network_name_str Journal of applied oral science (Online)
repository_id_str
spelling Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal systemAnatomical irregularitiesGutta-percha filled areaMicro-CT-based tooth replicaObturation techniquesRoot canal anatomyThis study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.Universidade de São Paulo. Faculdade de Odontologia de Bauru2024-05-20info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://www.revistas.usp.br/jaos/article/view/22540510.1590/Journal of Applied Oral Science; Vol. 32 (2024); e20230440Journal of Applied Oral Science; v. 32 (2024); e20230440Journal of Applied Oral Science; Vol. 32 (2024); e202304401678-77651678-7757reponame:Journal of applied oral science (Online)instname:Universidade de São Paulo (USP)instacron:USPenghttps://www.revistas.usp.br/jaos/article/view/225405/204747Copyright (c) 2024 Journal of Applied Oral Sciencehttp://creativecommons.org/licenses/by/4.0info:eu-repo/semantics/openAccess Vazquez-Alcaraz, SilverioGancedo-Caravia, LuciaArias , AnaBascones, Jaime2024-05-20T13:31:25Zoai:revistas.usp.br:article/225405Revistahttp://www.scielo.br/jaosPUBhttps://www.revistas.usp.br/jaos/oai||jaos@usp.br1678-77651678-7757opendoar:2024-05-20T13:31:25Journal of applied oral science (Online) - Universidade de São Paulo (USP)false
dc.title.none.fl_str_mv Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
title Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
spellingShingle Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
Vazquez-Alcaraz, Silverio
Anatomical irregularities
Gutta-percha filled area
Micro-CT-based tooth replica
Obturation techniques
Root canal anatomy
title_short Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
title_full Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
title_fullStr Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
title_full_unstemmed Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
title_sort Performance of obturation techniques in anatomical irregularities located at different thirds of the root canal system
author Vazquez-Alcaraz, Silverio
author_facet Vazquez-Alcaraz, Silverio
Gancedo-Caravia, Lucia
Arias , Ana
Bascones, Jaime
author_role author
author2 Gancedo-Caravia, Lucia
Arias , Ana
Bascones, Jaime
author2_role author
author
author
dc.contributor.author.fl_str_mv Vazquez-Alcaraz, Silverio
Gancedo-Caravia, Lucia
Arias , Ana
Bascones, Jaime
dc.subject.por.fl_str_mv Anatomical irregularities
Gutta-percha filled area
Micro-CT-based tooth replica
Obturation techniques
Root canal anatomy
topic Anatomical irregularities
Gutta-percha filled area
Micro-CT-based tooth replica
Obturation techniques
Root canal anatomy
description This study aimed to compare the quality of root canal obturation (ratio of area occupied by gutta-percha (G), sealer (S), and presence of voids (V)) in different anatomical irregularities (intercanal communications, lateral irregularities, and accessory canals) located at different thirds of the root canal system of mandibular molar replicas. Sixty-seven 3D printed replicas of an accessed mandibular molar were prepared using ProGlider and ProTaper Gold rotatory systems. Three specimens were randomly selected to be used as controls and did not receive further treatment. The rest were randomly distributed in 4 experimental groups to be obturated using either cold lateral compaction (LC), continuous wave of condensation (CW), and core-carrier obturation (ThermafilPlus (TH) or GuttaCore (GC)) (n=16 per group). AHPlus® sealer was used in all groups. The three controls and a specimen from each experimental group were scanned using micro-computed tomography. The rest of the replicas were sectioned at the sites of anatomical irregularities and examined at 30× magnification. The G, S, and V ratios were calculated dividing the area occupied with each element by the total root canal area and then compared among groups using the Kruskal-Wallis test. Voids were present in all obturation techniques with ratios from 0.01 to 0.15. CW obtained a significantly higher G ratio in the irregularity located in the coronal third (0.882) than LC (0.681), TH (0.773), and GC (0.801) (p<0.05). TH and GC achieved significantly higher G ratios in those located in the apical third (p<0.05). The worst quality of obturation was observed in the loop accessory canal with all obturation techniques. Whitin the limitations of this study, it can be concluded that CW and core-carrier obturation are respectively the most effective techniques for obturating anatomical irregularities located in the coronal and the apical third.
publishDate 2024
dc.date.none.fl_str_mv 2024-05-20
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://www.revistas.usp.br/jaos/article/view/225405
10.1590/
url https://www.revistas.usp.br/jaos/article/view/225405
identifier_str_mv 10.1590/
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://www.revistas.usp.br/jaos/article/view/225405/204747
dc.rights.driver.fl_str_mv Copyright (c) 2024 Journal of Applied Oral Science
http://creativecommons.org/licenses/by/4.0
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2024 Journal of Applied Oral Science
http://creativecommons.org/licenses/by/4.0
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade de São Paulo. Faculdade de Odontologia de Bauru
publisher.none.fl_str_mv Universidade de São Paulo. Faculdade de Odontologia de Bauru
dc.source.none.fl_str_mv Journal of Applied Oral Science; Vol. 32 (2024); e20230440
Journal of Applied Oral Science; v. 32 (2024); e20230440
Journal of Applied Oral Science; Vol. 32 (2024); e20230440
1678-7765
1678-7757
reponame:Journal of applied oral science (Online)
instname:Universidade de São Paulo (USP)
instacron:USP
instname_str Universidade de São Paulo (USP)
instacron_str USP
institution USP
reponame_str Journal of applied oral science (Online)
collection Journal of applied oral science (Online)
repository.name.fl_str_mv Journal of applied oral science (Online) - Universidade de São Paulo (USP)
repository.mail.fl_str_mv ||jaos@usp.br
_version_ 1800221670469795840