Stress distribution around short implants with different frictional joint designs: a photoelastic colorimetric analysis / Distribuição de tensão em torno de implantes curtos com diferentes designs de fricção: uma análise colorimétrica

• Autor(a) principal: Scotton, Ricardo
• Data de Publicação: 2021
• Outros Autores: Claudino, Daniel Dissenha, Savaris, Leonardo Brunet, Mendes, Flávia Maria Ferreria, Stroparo, Jeferson Luis de Oliveira, Storrer, Carmen Lúcia Mueller, Rezende, Carlos Eduardo Edwards, Macedo, Rander Moreira, Gabardo, Marilisa Carneiro Leão, Zielak, João César
• Tipo de documento: Artigo
• Idioma: por
• Título da fonte: Revista Veras
• Texto Completo: https://ojs.brazilianjournals.com.br/ojs/index.php/BRJD/article/view/39833
• topic: Implants; Osseointegration; Biomechanical behavior.

Aim: To compare, biomechanically, two types of short implants with different frictional implant/abutment joint designs. Methods: Two groups (n = 10) were divided in straight platform (DSP, 5 x 5.5 mm) and angled platform (30°) (Kopp, 5 x 6.0 mm). The loads applied axially were 100 N, 200 N and 400 N. A photoelastic colorimetric analysis around the implants was performed, based on the magenta fringes, measured in pixels. The data were analyzed by the One-Way ANOVA with repeated measures, Tukey and Mann-Whitney U tests (p < 0.05). Results: The short implants demonstrated similar biomechanical behavior, but statistical difference occurred in the group Kopp, under the axial load of 400 N (p < 0.05). Conclusion: The implant design showed influence on the stress distribution around the locking taper short dental implants. In both groups, the area of greatest stress distribution was at the apical region.