Mechanical analysis of femoral neck fracture fixation in synthetic bone

• Autor(a) principal: Freitas,Anderson
• Data de Publicação: 2014
• Outros Autores: Azevedo,Bruna Alves Soares, Souza,Roberto Rodrigues de, Costa,Hélio Ismael da, Maciel,Rafael Almeida, Souto,Diogo Ranier de Macedo
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Acta Ortopédica Brasileira (Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1413-78522014000300155
• topic: Femoral neck fractures; Fracture fixation, internal; Biomechanical phenomenas

OBJECTIVE: To analyze statistically results obtained between biomechanical assays on fixation of femoral neck fracture type Pauwels III, on synthetic bone, using 7.5 mm non parallel cannulated screws and control group. METHODS: Ten synthetic bones from a national brand were used. Test group: fixation of 70(o) tilt femoral neck osteotomy was performed using three 7.5 mm non parallel cannulated screws. We analyzed the resistance of this fixation with 5 mm of displacement, and rotational deviation (phase 1) and with 10 mm offset (phase 2). Control group: the models were tested in their integrity until the femoral neck fracture occurred. RESULTS: the values of the test group in phase 1, in sample 1-5 had a mean of 517N and SD = 96N. Rotational deviations showed a mean of 3.79° e SD = 2. 03°. In phase 2, mean was 649N and SD = 94N. The values of the maximum load in the control group were: 1544N, 1110N, 1359N, 1194N, 1437N; respectively. Statistical analysis between the groups showed a statistically significant lower value in the test group. CONCLUSION: the analysis of mechanical resistance between the groups has determined statistically significant value for the test group. Level of Evidence III, Case-control Study.